351: Show the actual BTC amount and fee to be swapped r=da-kami a=da-kami
We got user feedback, that it is confusing that the amount "found" in the wallet does not match the amount actually being swapped, thus with this PR we explicitly display the amount swapped and fees.
Co-authored-by: Daniel Karzel <daniel@comit.network>
319: Alice sweeps refunded funds into default wallet r=da-kami a=da-kami
Alice's refund scenario starts with generating the temporary wallet
from keys to claim the XMR which results in Alice' unloading the wallet.
Alice then loads her original wallet to be able to handle more swaps.
Since Alice is in the role of the long running daemon handling concurrent
swaps, the operation to close, claim and re-open her default wallet must
be atomic.
This PR adds an additional step, that sweeps all the refunded XMR back into
the default wallet. In order to ensure that this is possible, Alice has to
ensure that the locked XMR got enough confirmations.
These changes allow us to assert Alice's balance after refunding.
Co-authored-by: Daniel Karzel <daniel@comit.network>
If we enter a punish scenario we can be sure the punish timelock is expired.
Thus, we must be able to punish unless Bob published the refund transaction.
There is no benefit in racing punish against refund here, because we cannot recover from a punish tx failure anyway.
The logic was changed to:
Try to broadcast punish tx and await finality.
If either punish broadcasting of finality fails, try to fetch the refund transaction.
If it is available extract Bob's Monero key part and transition to refund.
If refund tx is not available fail without a status update.
Note that we do not distinguish different errors upon failure of punish, because
we cannot recover anyway. If we fail to retrieve Bob's refund tx, we just exit without
a status update so punish can be retried by resuming the swap.
Since Alice's refund scenario starts with generating the temporary wallet
from keys to claim the XMR which results in Alice' unloading the wallet.
Alice then loads her original wallet to be able to handle more swaps.
Since Alice is in the role of the long running daemon handling concurrent
swaps, the operation to close, claim and re-open her default wallet must
be atomic.
This PR adds an additional step, that sweeps all the refunded XMR back into
the default wallet. In order to ensure that this is possible, Alice has to
ensure that the locked XMR got enough confirmations.
These changes allow us to assert Alice's balance after refunding.
To achieve this, we decompose `watch_for_locked_xmr` into two parts:
1. A non-self-consuming function to construct a `WatchRequest`
2. A state transition that can now consume `self` again because
it is only called once within the whole select! expression.
Ideally, we would move more logic onto this state transition (like
comparing the actual amounts and fail the transition if it is not
valid). Doing so would have an unfortunate side-effect: We would
always wait for the full confirmations before checking whether or
not we actually receive enough XMR.
This allows us to have state transitions that consume self.
Instead of calling this function in all the branches, we can simply
make the whole match statement evaluate to the new state and perform
this functionality at the very end.
This allows us to move critical crypto logic onto `State3` which
holds all the necessary data which consequently allows us to get
rid of `lock_xmr` altogether by inlining it into the swap function.
The reduced indirection improves readability.
327: Bump actions/setup-python from v1 to v2.2.1 r=thomaseizinger a=dependabot[bot]
Bumps [actions/setup-python](https://github.com/actions/setup-python) from v1 to v2.2.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/actions/setup-python/releases">actions/setup-python's releases</a>.</em></p>
<blockquote>
<h2>v2.2.1</h2>
<ul>
<li>Fix PyPy3 issues with Windows</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="3105fb18c0"><code>3105fb1</code></a> fix is_windows (<a href="https://github.com/actions/setup-python/issues/172">#172</a>)</li>
<li><a href="8c5ea631b2"><code>8c5ea63</code></a> Adding support for more PyPy versions and installing them on-flight (<a href="https://github.com/actions/setup-python/issues/168">#168</a>)</li>
<li><a href="2831efe49a"><code>2831efe</code></a> Improve find-python to add "Scripts" folder to PATH on Windows machines (<a href="https://github.com/actions/setup-python/issues/169">#169</a>)</li>
<li><a href="3b3f2de1b1"><code>3b3f2de</code></a> update pypy3 to point to 3.6 (<a href="https://github.com/actions/setup-python/issues/164">#164</a>)</li>
<li><a href="723e46dad7"><code>723e46d</code></a> CODEOWNERS needs the org name for teams</li>
<li><a href="195f5c388b"><code>195f5c3</code></a> Create CODEOWNERS</li>
<li><a href="41b7212b16"><code>41b7212</code></a> Update README.md (<a href="https://github.com/actions/setup-python/issues/145">#145</a>)</li>
<li><a href="878156f1de"><code>878156f</code></a> Inject LD_LIBRARY_PATH library path into Python manifest install and setup (#...</li>
<li><a href="c181ffa198"><code>c181ffa</code></a> Add Environment Files (<a href="https://github.com/actions/setup-python/issues/138">#138</a>)</li>
<li><a href="1ce870e10f"><code>1ce870e</code></a> Fix links in documentation (<a href="https://github.com/actions/setup-python/issues/135">#135</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/actions/setup-python/compare/v1...3105fb18c05ddd93efea5f9e0bef7a03a6e9e7df">compare view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
330: Bump dialoguer from 0.7.1 to 0.8.0 r=thomaseizinger a=dependabot[bot]
Bumps [dialoguer](https://github.com/mitsuhiko/dialoguer) from 0.7.1 to 0.8.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/mitsuhiko/dialoguer/blob/master/CHANGELOG.md">dialoguer's changelog</a>.</em></p>
<blockquote>
<h2>0.8.0</h2>
<h3>Enhancements</h3>
<ul>
<li><code>Input::validate_with</code> can take a <code>FnMut</code> (allowing multiple references)</li>
</ul>
<h3>Breaking</h3>
<ul>
<li><code>Input::interact*</code> methods take <code>&mut self</code> instead of <code>&self</code></li>
</ul>
<h2>0.7.0</h2>
<h3>Enhancements</h3>
<ul>
<li>Added <code>wait_for_newline</code> to <code>Confirm</code></li>
<li>More secure password prompt</li>
<li>More documentation</li>
<li>Added <code>interact_text</code> method for input prompt</li>
<li>Added <code>inline_selections</code> to <code>ColorfulTheme</code></li>
</ul>
<h3>Breaking</h3>
<ul>
<li>Removed <code>theme::CustomPromptCharacterTheme</code></li>
<li><code>Input</code> validators now take the input type <code>T</code> as arg</li>
<li><code>Confirm</code> has no <code>default</code> value by default now</li>
</ul>
<h2>0.6.2</h2>
<h3>Enhancements</h3>
<ul>
<li>Updating some docs</li>
</ul>
<h2>0.6.1</h2>
<h3>Bugfixes</h3>
<ul>
<li><code>theme::ColorfulTheme</code> default styles are for stderr</li>
</ul>
<h2>0.6.0</h2>
<h3>Breaking</h3>
<ul>
<li>Removed <code>theme::SelectionStyle</code> enum</li>
<li>Allowed more customization for <code>theme::Theme</code> trait by changing methods</li>
<li>Allowed more customization for <code>theme::ColorfulTheme</code> by changing members</li>
<li>Renamed prompt <code>Confirmation</code> to <code>Confirm</code></li>
<li>Renamed prompt <code>PasswordInput</code> to <code>Password</code></li>
<li>Renamed prompt <code>OrderList</code> to <code>Sort</code></li>
<li>Renamed prompt <code>Checkboxes</code> to <code>MultiSelect</code></li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="2c3fe6b646"><code>2c3fe6b</code></a> Release 0.8.0</li>
<li><a href="64f5f9c6f5"><code>64f5f9c</code></a> Allow confirm with no choice (<a href="https://github.com/mitsuhiko/dialoguer/issues/101">#101</a>)</li>
<li><a href="0250090f95"><code>0250090</code></a> Update some docs in confirm prompt</li>
<li><a href="a76fb72c54"><code>a76fb72</code></a> Merge pull request <a href="https://github.com/mitsuhiko/dialoguer/issues/102">#102</a> from spenserblack/typo-fix</li>
<li><a href="3dd93bb75a"><code>3dd93bb</code></a> Fix typo: ereased -> erased</li>
<li><a href="7ea6275caa"><code>7ea6275</code></a> Update CI for i686 ubuntu</li>
<li><a href="af664807da"><code>af66480</code></a> Allow FnMut for validate (<a href="https://github.com/mitsuhiko/dialoguer/issues/96">#96</a>)</li>
<li><a href="2b5722d0f5"><code>2b5722d</code></a> Update README.md</li>
<li><a href="2df3a705eb"><code>2df3a70</code></a> Update ci.yml</li>
<li><a href="8cebf522b3"><code>8cebf52</code></a> Merge pull request <a href="https://github.com/mitsuhiko/dialoguer/issues/94">#94</a> from mitsuhiko/remove-travis</li>
<li>Additional commits viewable in <a href="https://github.com/mitsuhiko/dialoguer/compare/0.7.1...0.8.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
331: Bump tokio from 1.0.2 to 1.3.0 r=thomaseizinger a=dependabot[bot]
Bumps [tokio](https://github.com/tokio-rs/tokio) from 1.0.2 to 1.3.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/tokio-rs/tokio/releases">tokio's releases</a>.</em></p>
<blockquote>
<h2>Tokio v1.3.0</h2>
<h3>Added</h3>
<ul>
<li>coop: expose an <code>unconstrained()</code> opt-out (<a href="https://github.com/tokio-rs/tokio/issues/3547">#3547</a>)</li>
<li>net: add <code>into_std</code> for net types without it (<a href="https://github.com/tokio-rs/tokio/issues/3509">#3509</a>)</li>
<li>sync: add <code>same_channel</code> method to <code>mpsc::Sender</code> (<a href="https://github.com/tokio-rs/tokio/issues/3532">#3532</a>)</li>
<li>sync: add <code>{try_,}acquire_many_owned</code> to <code>Semaphore</code> (<a href="https://github.com/tokio-rs/tokio/issues/3535">#3535</a>)</li>
<li>sync: add back <code>RwLockWriteGuard::map</code> and <code>RwLockWriteGuard::try_map</code> (<a href="https://github.com/tokio-rs/tokio/issues/3348">#3348</a>)</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>sync: allow <code>oneshot::Receiver::close</code> after successful <code>try_recv</code> (<a href="https://github.com/tokio-rs/tokio/issues/3552">#3552</a>)</li>
<li>time: do not panic on <code>timeout(Duration::MAX)</code> (<a href="https://github.com/tokio-rs/tokio/issues/3551">#3551</a>)</li>
</ul>
<h3>Documented</h3>
<ul>
<li>doc: doc aliases for pre-1.0 function names (<a href="https://github.com/tokio-rs/tokio/issues/3523">#3523</a>)</li>
<li>io: fix typos (<a href="https://github.com/tokio-rs/tokio/issues/3541">#3541</a>)</li>
<li>io: note the EOF behaviour of <code>read_until</code> (<a href="https://github.com/tokio-rs/tokio/issues/3536">#3536</a>)</li>
<li>io: update <code>AsyncRead::poll_read</code> doc (<a href="https://github.com/tokio-rs/tokio/issues/3557">#3557</a>)</li>
<li>net: update <code>UdpSocket</code> splitting doc (<a href="https://github.com/tokio-rs/tokio/issues/3517">#3517</a>)</li>
<li>runtime: add link to <code>LocalSet</code> on <code>new_current_thread</code> (<a href="https://github.com/tokio-rs/tokio/issues/3508">#3508</a>)</li>
<li>runtime: update documentation of thread limits (<a href="https://github.com/tokio-rs/tokio/issues/3527">#3527</a>)</li>
<li>sync: do not recommend <code>join_all</code> for <code>Barrier</code> (<a href="https://github.com/tokio-rs/tokio/issues/3514">#3514</a>)</li>
<li>sync: documentation for <code>oneshot</code> (<a href="https://github.com/tokio-rs/tokio/issues/3592">#3592</a>)</li>
<li>sync: rename <code>notify</code> to <code>notify_one</code> (<a href="https://github.com/tokio-rs/tokio/issues/3526">#3526</a>)</li>
<li>time: fix typo in <code>Sleep</code> doc (<a href="https://github.com/tokio-rs/tokio/issues/3515">#3515</a>)</li>
<li>time: sync <code>interval.rs</code> and <code>time/mod.rs</code> docs (<a href="https://github.com/tokio-rs/tokio/issues/3533">#3533</a>)</li>
</ul>
<h2>Tokio v1.2.0</h2>
<h3>Added</h3>
<ul>
<li>signal: make <code>Signal::poll_recv</code> method public (<a href="https://github.com/tokio-rs/tokio/issues/3383">#3383</a>)</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>time: make <code>test-util</code> paused time fully deterministic (<a href="https://github.com/tokio-rs/tokio/issues/3492">#3492</a>)</li>
</ul>
<h3>Documented</h3>
<ul>
<li>sync: link to new broadcast and watch wrappers (<a href="https://github.com/tokio-rs/tokio/issues/3504">#3504</a>)</li>
</ul>
<h2>Tokio v1.1.1</h2>
<p>Forward ports 1.0.3 fix.</p>
<h3>Fixed</h3>
<ul>
<li>io: memory leak during shutdown (<a href="https://github.com/tokio-rs/tokio/issues/3477">#3477</a>).</li>
</ul>
<h2>Tokio v1.1.0</h2>
<h3>Added</h3>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="d0e4dd1d7b"><code>d0e4dd1</code></a> chore: prepare Tokio v1.3.0 (<a href="https://github.com/tokio-rs/tokio/issues/3597">#3597</a>)</li>
<li><a href="872bc09e83"><code>872bc09</code></a> examples: update chat example (<a href="https://github.com/tokio-rs/tokio/issues/3587">#3587</a>)</li>
<li><a href="db1d90453c"><code>db1d904</code></a> util: fuse PollSemaphore (<a href="https://github.com/tokio-rs/tokio/issues/3578">#3578</a>)</li>
<li><a href="05eeea570e"><code>05eeea5</code></a> coop: expose an unconstrained() opt-out (<a href="https://github.com/tokio-rs/tokio/issues/3547">#3547</a>)</li>
<li><a href="f70b9b84f7"><code>f70b9b8</code></a> sync: documenation for oneshot (<a href="https://github.com/tokio-rs/tokio/issues/3592">#3592</a>)</li>
<li><a href="704de8c01b"><code>704de8c</code></a> stream: remove duplicate <code>doc(test(..))</code> & <code>cfg_attr</code> declarations (<a href="https://github.com/tokio-rs/tokio/issues/3571">#3571</a>)</li>
<li><a href="47be928444"><code>47be928</code></a> sync: yield initial value in WatchStream (<a href="https://github.com/tokio-rs/tokio/issues/3576">#3576</a>)</li>
<li><a href="e06b257e09"><code>e06b257</code></a> sync: add same_channel method to mpsc Senders (<a href="https://github.com/tokio-rs/tokio/issues/3532">#3532</a>)</li>
<li><a href="0867a6fc03"><code>0867a6f</code></a> util: add pollable mpsc::Sender (<a href="https://github.com/tokio-rs/tokio/issues/3490">#3490</a>)</li>
<li><a href="0d838bf5ad"><code>0d838bf</code></a> io: fix link to std src in util (<a href="https://github.com/tokio-rs/tokio/issues/3568">#3568</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/tokio-rs/tokio/compare/tokio-1.0.2...tokio-1.3.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
332: Bump base64 from 0.12.3 to 0.13.0 r=thomaseizinger a=dependabot[bot]
Bumps [base64](https://github.com/marshallpierce/rust-base64) from 0.12.3 to 0.13.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/marshallpierce/rust-base64/blob/master/RELEASE-NOTES.md">base64's changelog</a>.</em></p>
<blockquote>
<h1>0.13.0</h1>
<ul>
<li>Config methods are const</li>
<li>Added <code>EncoderStringWriter</code> to allow encoding directly to a String</li>
<li><code>EncoderWriter</code> now owns its delegate writer rather than keeping a reference to it (though refs still work)
<ul>
<li>As a consequence, it is now possible to extract the delegate writer from an <code>EncoderWriter</code> via <code>finish()</code>, which returns <code>Result<W></code> instead of <code>Result<()></code>. If you were calling <code>finish()</code> explicitly, you will now need to use <code>let _ = foo.finish()</code> instead of just <code>foo.finish()</code> to avoid a warning about the unused value.</li>
</ul>
</li>
<li>When decoding input that has both an invalid length and an invalid symbol as the last byte, <code>InvalidByte</code> will be emitted instead of <code>InvalidLength</code> to make the problem more obvious.</li>
</ul>
<h1>0.12.2</h1>
<ul>
<li>Add <code>BinHex</code> alphabet</li>
</ul>
<h1>0.12.1</h1>
<ul>
<li>Add <code>Bcrypt</code> alphabet</li>
</ul>
<h1>0.12.0</h1>
<ul>
<li>A <code>Read</code> implementation (<code>DecoderReader</code>) to let users transparently decoded data from a b64 input source</li>
<li>IMAP's modified b64 alphabet</li>
<li>Relaxed type restrictions to just <code>AsRef<[ut8]></code> for main <code>encode*</code>/<code>decode*</code> functions</li>
<li>A minor performance improvement in encoding</li>
</ul>
<h1>0.11.0</h1>
<ul>
<li>Minimum rust version 1.34.0</li>
<li><code>no_std</code> is now supported via the two new features <code>alloc</code> and <code>std</code>.</li>
</ul>
<h1>0.10.1</h1>
<ul>
<li>Minimum rust version 1.27.2</li>
<li>Fix bug in streaming encoding (<a href="https://github.com/marshallpierce/rust-base64/pull/90">#90</a>): if the underlying writer didn't write all the bytes given to it, the remaining bytes would not be retried later. See the docs on <code>EncoderWriter::write</code>.</li>
<li>Make it configurable whether or not to return an error when decoding detects excess trailing bits.</li>
</ul>
<h1>0.10.0</h1>
<ul>
<li>Remove line wrapping. Line wrapping was never a great conceptual fit in this library, and other features (streaming encoding, etc) either couldn't support it or could support only special cases of it with a great increase in complexity. Line wrapping has been pulled out into a <a href="https://crates.io/crates/line-wrap">line-wrap</a> crate, so it's still available if you need it.
<ul>
<li><code>Base64Display</code> creation no longer uses a <code>Result</code> because it can't fail, which means its helper methods for common
configs that <code>unwrap()</code> for you are no longer needed</li>
</ul>
</li>
<li>Add a streaming encoder <code>Write</code> impl to transparently base64 as you write.</li>
<li>Remove the remaining <code>unsafe</code> code.</li>
<li>Remove whitespace stripping to simplify <code>no_std</code> support. No out of the box configs use it, and it's trivial to do yourself if needed: <code>filter(|b| !b" \n\t\r\x0b\x0c".contains(b)</code>.</li>
<li>Detect invalid trailing symbols when decoding and return an error rather than silently ignoring them.</li>
</ul>
<h1>0.9.3</h1>
<ul>
<li>Update safemem</li>
</ul>
<h1>0.9.2</h1>
<ul>
<li>Derive <code>Clone</code> for <code>DecodeError</code>.</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="b4fc91325e"><code>b4fc913</code></a> v0.13.0</li>
<li><a href="bba4c5d11e"><code>bba4c5d</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/145">#145</a> from marshallpierce/mp/cleanup</li>
<li><a href="42967320b3"><code>4296732</code></a> Add docs and other cleanup</li>
<li><a href="6bb3556633"><code>6bb3556</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/144">#144</a> from untitaker/invalid-bytes-not-length</li>
<li><a href="5b40e0c04e"><code>5b40e0c</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/142">#142</a> from marshallpierce/mp/string-writer</li>
<li><a href="8b1ae22bab"><code>8b1ae22</code></a> Rename StrWrite to StrConsumer</li>
<li><a href="27ccb6591e"><code>27ccb65</code></a> fix tests</li>
<li><a href="d15cd384e1"><code>d15cd38</code></a> Give better error messages when decoding data with trailing newlines</li>
<li><a href="5a56885c65"><code>5a56885</code></a> Introduce StrWriter to allow ESW to wrap both a String and a &mut String</li>
<li><a href="2dc0296d2a"><code>2dc0296</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/143">#143</a> from marshallpierce/mp/invalid-length-doc</li>
<li>Additional commits viewable in <a href="https://github.com/marshallpierce/rust-base64/compare/v0.12.3...v0.13.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
321: Properly handle concurrent messages to and from peers r=thomaseizinger a=thomaseizinger
Previously, we were forwarding incoming messages from peers to all
swaps that were currently running. That is obviously wrong. The new
design scopes an `EventLoopHandle` to a specific PeerId to avoid
this problem.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
322: Refactor `ExecutionParams` and harmonize sync intervals of wallets r=thomaseizinger a=thomaseizinger
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Previously, we were forwarding incoming messages from peers to all
swaps that were currently running. That is obviously wrong. The new
design scopes an `EventLoopHandle` to a specific PeerId to avoid
this problem.
We define the sync interval as 1/10th of the blocktime. For the
special case of our tests, we however check at max once per second.
The tests have a super fast blocktime. As such we shouldn't hammer
the nodes with a request every 100ms.
Bob does not care whether tx lock is confirmed. That is alice's problem.
This wait was introduced to remedy a bug in status_of_script() which was
failing when called on a transaction with no confirmations.
320: Fix env filter for asb r=thomaseizinger a=thomaseizinger
1. The asb didn't log any if the statements within main.rs
2. We were initializing unnecessary filters that don't make any sense
for the asb. warp and http are not used and the harness-es are for
test only.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
317: Fix monero refresh interval r=thomaseizinger a=thomaseizinger
The comparison should be the MAXIMUM of the two values, not the
minimum, otherwise we always refresh at an interval of 1 second.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
A non-interactive terminal is likely something along the lines of
journalctl which captures a timestamp by itself. In theory, it could
also be just a logfile but we rather accept this limitation and keep
the configuration surface simple rather than exposing another config
switch.
1. The asb didn't log any if the statements within main.rs
2. We were initializing unnecessary filters that don't make any sense
for the asb. warp and http are not used and the harness-es are for
test only.
We have a repeated pattern where we construct one of our
Tx{Cancel,Redeem,Punish,Refund,Lock} transactions and wait until
the status of this transaction changes. We can make this more
ergonomic by creating and implementing a `Watchable` trait that
gives access to the TxId and relevant script for this transaction.
This allows us to remove a parameter from the `watch_until_status`
function.
Additionally, there is a 2nd pattern: "Completing" one of these
transaction and waiting until they are confirmed with the configured
number of blocks for finality. We can make this more ergonomic by
returning a future from `broadcast` that callers can await in case
they want to wait for the broadcasted transaction to reach finality.
The execution params don't change throughout the lifetime of the
program. They can be set in the wallet at the very beginning.
This simplifies the interface of the wallet functions.
We achieve our optimizations in three ways:
1. Batching calls instead of making them individually.
To get access to the batch calls, we replace all our
calls to the HTTP interface with RPC calls.
2. Never directly make network calls based on function
calls on the wallet.
Instead, inquiring about the status of a script always
just returns information based on local data. With every
call, we check when we last refreshed the local data and
do so if the data is considered to be too old. This
interval is configurable.
3. Use electrum's notification feature to get updated
with the latest blockheight.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: Rishab Sharma <rishflab@hotmail.com>
