<ahref="https://www.tubearchivist.com/discord"target="_blank"><imgsrc="https://tiles.tilefy.me/t/tubearchivist-discord.png"alt="tubearchivist-discord"title="TA Discord Server Members"height="50"width="190"/></a>
Once your YouTube video collection grows, it becomes hard to search and find a specific video. That's where Tube Archivist comes in: By indexing your video collection with metadata from YouTube, you can organize, search and enjoy your archived YouTube videos without hassle offline through a convenient web interface.
- [Browser Extension](https://github.com/tubearchivist/browser-extension) Tube Archivist Companion, for [Firefox](https://addons.mozilla.org/addon/tubearchivist-companion/) and [Chrome](https://chrome.google.com/webstore/detail/tubearchivist-companion/jjnkmicfnfojkkgobdfeieblocadmcie)
There's dedicated user-contributed install steps under [docs/Installation.md](./docs/Installation.md) for podman, Unraid, Truenas and Synology which you can use instead of this section if you happen to be using one of those. Otherwise, continue on.
For minimal system requirements, the Tube Archivist stack needs around 2GB of available memory for a small testing setup and around 4GB of available memory for a mid to large sized installation.
Note for arm64 hosts: The Tube Archivist container is multi arch, so is Elasticsearch. RedisJSON doesn't offer arm builds, but you can use the image `bbilly1/rejson`, an unofficial rebuild for arm64.
This project requires docker. Ensure it is installed and running on your system.
Save the [docker-compose.yml](./docker-compose.yml) file from this reposity somewhere permanent on your system, keeping it named `docker-compose.yml`. You'll need to refer to it whenever starting this application.
Edit the following values from that file:
- under `tubearchivist`->`environment`:
-`HOST_UID`: your UID, if you want TubeArchivist to create files with your UID. Remove if you are OK with files being owned by the the container user.
-`HOST_GID`: as above but GID.
-`TA_HOST`: change it to the address of the machine you're running this on. This can be an IP address or a domain name.
-`TA_PASSWORD`: pick a password to use when logging in.
-`ELASTIC_PASSWORD`: pick a password for the elastic service. You won't need to type this yourself.
-`TZ`: your time zone. If you don't know yours, you can look it up [here](https://www.timezoneconverter.com/cgi-bin/findzone/findzone).
- under `archivist-es`->`environment`:
-`"ELASTIC_PASSWORD=verysecret"`: change `verysecret` to match the ELASTIC_PASSWORD you picked above.
By default Docker will store all data, including downloaded data, in its own data-root directory (which you can find by running `docker info` and looking for the "Docker Root Dir"). If you want to use other locations, you can replace the `media:`, `cache:`, `redis:`, and `es:` volume names with absolute paths; if you do, remove them from the `volumes:` list at the bottom of the file.
From a terminal, `cd` into the directory you saved the `docker-compose.yml` file in and run `docker compose up --detach`. The first time you do this it will download the appropriate images, which can take a minute.
You can follow the logs with `docker compose logs -f`. Once it's ready it will print something like `celery@1234567890ab ready`. At this point you should be able to go to `http://your-host:8000` and log in with the `TA_USER`/`TA_PASSWORD` credentials.
You can bring the application down by running `docker compose down` in the same directory.
Use the *latest* (the default) or a named semantic version tag for the docker images. The *unstable* tag is for intermediate testing and as the name implies, is **unstable** and not be used on your main installation but in a [testing environment](CONTRIBUTING.md).
- The environment variables `HOST_UID` and `HOST_GID` allows Tube Archivist to `chown` the video files to the main host system user instead of the container user. Those two variables are optional, not setting them will disable that functionality. That might be needed if the underlying filesystem doesn't support `chown` like *NFS*.
- Set the environment variable `TA_HOST` to match with the system running Tube Archivist. This can be a domain like *example.com*, a subdomain like *ta.example.com* or an IP address like *192.168.1.20*, add without the protocol and without the port. You can add multiple hostnames separated with a space. Any wrong configurations here will result in a `Bad Request (400)` response.
- Change the environment variables `TA_USERNAME` and `TA_PASSWORD` to create the initial credentials.
-`ELASTIC_PASSWORD` is for the password for Elasticsearch. The environment variable `ELASTIC_USER` is optional, should you want to change the username from the default *elastic*.
If you have a collision on port `8000`, best solution is to use dockers *HOST_PORT* and *CONTAINER_PORT* distinction: To for example change the interface to port 9000 use `9000:8000` in your docker-compose file.
Should that not be an option, the Tube Archivist container takes these two additional environment variables:
- **TA_PORT**: To actually change the port where nginx listens, make sure to also change the ports value in your docker-compose file.
- **TA_UWSGI_PORT**: To change the default uwsgi port 8080 used for container internal networking between uwsgi serving the django application and nginx.
Changing any of these two environment variables will change the files *nginx.conf* and *uwsgi.ini* at startup using `sed` in your container.
-`TA_LDAP_USER_FILTER` (ex: `(objectClass=user)`) Filter for valid users. Login usernames are matched using the attribute specified in `TA_LDAP_USER_ATTR_MAP_USERNAME` and should not be specified in this filter.
When LDAP authentication is enabled, django passwords (e.g. the password defined in TA_PASSWORD), will not allow you to login, only the LDAP server is used.
Use `bbilly1/tubearchivist-es` to automatically get the recommended version, or use the official image with the version tag in the docker-compose file.
For some architectures it might be required to run Redis JSON on a nonstandard port. To for example change the Redis port to **6380**, set the following values:
- Set the environment variable `REDIS_PORT=6380` to the *tubearchivist* service.
- For the *archivist-redis* service, change the ports to `6380:6380`
- Additionally set the following value to the *archivist-redis* service: `command: --port 6380 --loadmodule /usr/lib/redis/modules/rejson.so`
You will see the current version number of **Tube Archivist** in the footer of the interface so you can compare it with the latest release to make sure you are running the *latest and greatest*.
* There can be breaking changes between updates, particularly as the application grows, new environment variables or settings might be required for you to set in the your docker-compose file. *Always* check the **release notes**: Any breaking changes will be marked there.
* All testing and development is done with the Elasticsearch version number as mentioned in the provided *docker-compose.yml* file. This will be updated when a new release of Elasticsearch is available. Running an older version of Elasticsearch is most likely not going to result in any issues, but it's still recommended to run the same version as mentioned. Use `bbilly1/tubearchivist-es` to automatically get the recommended version.
There is a Helm Chart available at https://github.com/insuusvenerati/helm-charts. Mostly self-explanatory but feel free to ask questions in the discord / subreddit.
If you see a message similar to `failed to obtain node locks, tried [/usr/share/elasticsearch/data]` and `maybe these locations are not writable` when initially starting elasticsearch, that probably means the container is not allowed to write files to the volume.
To fix that issue, shutdown the container and on your host machine run:
The Elasticsearch index will turn to *read only* if the disk usage of the container goes above 95% until the usage drops below 90% again, you will see error messages like `disk usage exceeded flood-stage watermark`, [link](https://github.com/tubearchivist/tubearchivist#disk-usage).
Similar to that, TubeArchivist will become all sorts of messed up when running out of disk space. There are some error messages in the logs when that happens, but it's best to make sure to have enough disk space before starting to download.
1. Go through the **settings** page and look at the available options. Particularly set *Download Format* to your desired video quality before downloading. **Tube Archivist** downloads the best available quality by default. To support iOS or MacOS and some other browsers a compatible format must be specified. For example:
3. On the **downloads** page, click on *Rescan subscriptions* to add videos from the subscribed channels to your Download queue or click on *Add to download queue* to manually add Video IDs, links, channels or playlists.
We have come far, nonetheless we are not short of ideas on how to improve and extend this project. Issues waiting for you to be tackled in no particular order:
- [ ] Implement [Apprise](https://github.com/caronc/apprise) for notifications ([#97](https://github.com/tubearchivist/tubearchivist/issues/97))
- [ ] User created playlists, random and repeat controls ([#108](https://github.com/tubearchivist/tubearchivist/issues/108), [#220](https://github.com/tubearchivist/tubearchivist/issues/220))
- Video files created by Tube Archivist need to be playable in your browser of choice. Not every codec is compatible with every browser and might require some testing with format selection.
- Every limitation of **yt-dlp** will also be present in Tube Archivist. If **yt-dlp** can't download or extract a video for any reason, Tube Archivist won't be able to either.
