[![Superhighway84](superhighway84.jpeg)](superhighway84.png) ``` =============================================================================== INTERACTIVE ASYNC / FULL DUPLEX =============================================================================== Dial Up To 19.2 Kbps with _ _ _ __ ____ __ _ __ ___ ____ / / / // / __/_ _____ ___ ____/ / (_)__ _/ / _ _____ ___ __( _ )/ / / _\ _\_\_\\_\ \/ // / _ \/ -_) __/ _ \/ / _ \/ _ \ |/|/ / _ \/ // / _ /_ _/ / / / // /___/\_,_/ .__/\__/_/ /_//_/_/\_, /_//_/__,__/\_,_/\_, /\___/ /_/ /_/ /___/ /___/ ::: UNCENSORABLE USENET-INSPIRED DECENTRALIZED INTERNET DISCUSSION SYSTEM ::: The V.H.S. (Very High Speed) Superhighway84 platform is more than just the fastest decentralized, uncensorable, USENET-inspired communications platform available. It is also the first one to be based on the latest IPFS technology available today! Superhighway84 offers the most spectacular features under the Spectrum. 100% Error Protection Data and Character Compression Alternate Bell Compatible Mode Long Haul Satellite Operation Network Diagnostics Fallback Mode And More! The Superhighway84 modern, uncensorable, decentralized internet discussion system. It should cost a lot more than $0. ``` ![Screenshot](screenshot01.png) Superhighway84 is an open source, terminal-based, IPFS-powered, USENET-inspired, uncensorable, decentralized peer-to-peer internet discussion system with retro aesthetics. [More info here.](https://xn--gckvb8fzb.com/superhighway84/) ## Installation ### Prerequisites Download the [IPFS 12.x release](https://github.com/ipfs/kubo/releases/tag/v0.12.2) and unpack it: ```sh $ tar -xzf ./go-ipfs_*.tar.gz ``` If you haven't used IPFS so far, initialize the IPFS repository using the following command: ```sh $ ./go-ipfs/ipfs init ``` If you had used IPFS an already have an IPFS repository in place, either (re)move it from `~/.ipfs` or make sure to `export IPFS_PATH` before running the `ipfs init` command, e.g.: ```sh $ export IPFS_PATH=~/.ipfs-sh84 $ ./go-ipfs/ipfs init ``` ### From Release Download the [latest release](https://github.com/mrusme/superhighway84/releases/latest) and unpack it: ```sh $ tar -xzf ./superhighway84_*.tar.gz $ ./superhighway84 ``` If you initialized the IPFS repo under in a custom location, you need to prefix `IPFS_PATH`: ```sh $ IPFS_PATH=~/.ipfs-sh84 ./superhighway84 ``` The binary `superhighway84` can be moved wherever you please. ### From Source Clone this repository - from [GitHub](https://github.com/mrusme/superhighway84) ```sh $ git@github.com:mrusme/superhighway84.git ``` - from [Radicle](https://app.radicle.network/seeds/maple.radicle.garden/rad:git:hnrkcf9617a8pxxtw8caaop9ioe8cj5u4c4co) ```sh $ rad clone rad://maple.radicle.garden/hnrkcf9617a8pxxtw8caaop9ioe8cj5u4c4co ``` Then cd into the cloned directory and run: ```sh $ go build . ``` The binary will be available at ./superhighway84 and can be moved wherever you please. ## Running First, check ulimit -n and verify that it's at a reasonable amount. IPFS requires it to be large enough (>= 2048) in order to work properly over time. Second, if your hardware shouldn't be a beefy computer but instead one of those flimsy MacBooks, older hardware, a Raspberry or a low-memory VPS it is advisable to set the previously created IPFS repository to the `lowpower` profile. ```sh $ ipfs config profile apply lowpower ``` This should help with CPU usage, file descriptors and the amount of network connections. While during the startup period you might still see peers peaking between 1k and 3k, connections should ultimately settle somewhere between 100 and 300 peers. Afterwards you can simply launch the binary: ```sh $ superhighway84 ``` A setup wizard will help you with initial configuration. Please make sure to have at least HOME and EDITOR exported in your environment. In case you're intending to run the official IPFS daemon and Superhighway84 in parallel, be sure to adjust the ports in their respective IPFS repos (e.g. `~/.ipfs` and `~/.ipfs-sh84`) so that they won't utilize the same port numbers. The ports `4001`, `5001` and `8080` are relevant and should be adjusted to something other for every new repo/IPFS node that will run in parallel, e.g.: ```json "Addresses": { "Swarm": [ "/ip4/0.0.0.0/tcp/4002", "/ip6/::/tcp/4002", "/ip4/0.0.0.0/udp/4002/quic", "/ip6/::/udp/4002/quic" ], "Announce": [], "NoAnnounce": [], "API": "/ip4/127.0.0.1/tcp/5002", "Gateway": "/ip4/127.0.0.1/tcp/8081" }, ``` **NOTE**: When running Superhighway84 for the first time it might seem like it's "hanging" at the command prompt. Usually it isn't hanging but rather searching for peer it can connect to in order to synchronize the database. Depending on how many people are online, this process might take _some time_, please be patient. ## Connectivity If you're having trouble connecting to the IPFS network that might be due to your network setup. Please try the IPFS `AutoRelay` feature in such a case: ```sh $ ipfs config --json Swarm.RelayClient.Enabled true ``` More information on this can be found here: https://github.com/ipfs/kubo/blob/master/docs/experimental-features.md#autorelay ## Configuration Superhighway84 will guide you through the basic configuration on its first run. The configuration is stored at the path that you specified in the setup wizard. After it was successfully created, it can be adjusted manually and will take effect on the next launch of Superhighway84. Configuration options that might be of interest: ``` ArticlesListView = The view to be used for the articles lit. Possible values: 0 - threaded view, latest thread at the top 1 - list view, latest article at the top [Profile] From = The identifier that is being shown when posting an article, e.g. your name, username or email that you'd like to display Organization = An optional organization that you'd like to display affiliation with [Shortcuts] The shortcuts for navigating Superhighway84, can be reset to its defaults by simply removing the whole [Shortcuts] block and launching Superhighway84 The structure is as following: ` = "event"` The key codes can be looked up under the following link: https://pkg.go.dev/github.com/gdamore/tcell/v2#Key For simple ASCII characters use their ASCII code, e.g. `114` for the character `r`. ``` ## Usage The default keyboard shortcuts are: ``` C-r: Refresh C-h: Focus groups list C-l, C-k: Focus articles list C-j: Focus preview pane C-q: Quit k: Move up in list j: Move down in list h: Move left in list l: Move right in list g: Move to the beginning of list/text G: Move to the end of list/text CR: Select item in list n: Publish new article r: Reply to selected article ``` However, you are free to customize these within your configuration file, under the section `Shortcuts`. ### Submit Article When submitting a new article or a reply to an article, the $EDITOR is launched in which a document with a specific structure will be visible. This structure consists of the HEADER, a SEPARATOR and the BODY and looks like this: ``` Subject: This is the subject of the article Newsgroup: test.sandbox = = = = = = This is the multiline body of the article ``` The HEADER contains all headers that are required for an article to be submitted. These are: - `Subject:`\ The subject of the article that will be shown in the articles list. The subject must only contain of printable ASCII characters. - `Newsgroup:`\ The newsgroup under which the article will be submitted, this can either be an existing group or a new group. Please try to follow the convention when creating new groups. The newsgroup must only contain of printable ASCII characters. The SEPARATOR contains of 6 equal signs and 5 spaces, alternating each other, followed by a new line. The BODY can contain of multiline text. ## Known Limitations - The OrbitDB that Superhighway84 uses is a public database, meaning everyone can alter its data. Since its using a standard _docstore_, PUT and DELETE events can alter existing data. This issue will be solved in the future by customizing the store to ignore these types of events. - Superhighway84 is bound to the version of IPFS that Berty decides to support for go-orbit-db. go-orbit-db updates, on the other hand, seem to introduce breaking changes from time to time, which are hard to debug as someone without in-depth knowledge nor documentation. Since Superhighway84 is pretty much a one-man-show it would be quite challenging to fork go-orbit-db in order to keep it up to date with IPFS and make its interface more stable. Unfortunately there doesn't seem to be an alternative to Berty's go-orbit-db as of right now, so Superhighway84 is basically stuck with it. If you happen to know your way around IPFS and maybe even go-orbit-db, and would like to support this project, please get in touch! - If you have a newer IPFS version installed than the one used by Superhighway84, please make sure to **not upgrade** the IPFS_REPO that Superhighway84 is using. Otherwise you will get an error when starting Superhighway84 that will tell you that there is an IPFS repository mismatch: ``` > panic: Your programs version (11) is lower than your repos (12). ``` If this should be the case, please follow the instructions provided here: https://github.com/mrusme/superhighway84/issues/42#issuecomment-1100582472 - If you encounter the following issue your IPFS repo version might be older than what Superhighway84 is using: ``` > panic: ipfs repo needs migration ``` In this case you might want to follow the IPFS migration guide here: https://github.com/ipfs/fs-repo-migrations/blob/master/run.md Alternatively use the same IPFS version as used by Superhighway84 to initialize a dedicated Superhighway84 repository. Please refer to the INSTALLATION part for how to do so. ## Credits - Superhighway84 name, code and graphics by [mrusme](https://github.com/mrusme) - Logo backdrop by [Swift](https://twitter.com/Swift_1_2/status/1114865117533888512)