mirror of
https://github.com/DoTheEvo/selfhosted-apps-docker
synced 2024-11-09 01:10:30 +00:00
82 lines
1.9 KiB
Markdown
82 lines
1.9 KiB
Markdown
# Dumb switch with wifi AP
|
||
|
||
## Objective
|
||
|
||
* every single port bridged, device acting like a switch
|
||
* wifi being bridged to the same network
|
||
* automatic IP assigned
|
||
* no DHCP, no NAT, no nothing, just like a dumb switch with wifi thats all
|
||
|
||
## Steps
|
||
|
||
Clear any config
|
||
|
||
* System > Reset Configuration > No Default Configuration
|
||
|
||
---
|
||
|
||
**Bridge**
|
||
|
||
* Bridge > add bridge1
|
||
* Ports > add > All interfaces to bridge1
|
||
|
||
*winbox will reconnect*
|
||
|
||
---
|
||
|
||
**IP**
|
||
|
||
*dynamic*
|
||
|
||
* IP > DHCP client > add > interface bridge, rest defaults
|
||
|
||
*static*
|
||
|
||
* IP > Addresses > add >
|
||
* Address - 192.168.88.2/24
|
||
* Network - it gets filled out automatically on ok/apply based on subnet mask in address
|
||
* interface - bridge
|
||
|
||
---
|
||
|
||
2ghz
|
||
|
||
* Wireless > open 2ghz interface > Wireless tab > click Advanced Mode > in this tab
|
||
* change Mode from station to ap bridge
|
||
* change Band to 2Ghz- B/G/N
|
||
* Channel Width stay at 20Mhz if lot of wifi around you, go to 40Mhz if not
|
||
* Frequency - pick a channel \[1-2412 ; 6-2437; 11-2462\]
|
||
* SSID - pick a name
|
||
* Radio Name - if you you want to distingush between APs with same SSID?
|
||
* Skip DFS channels - all
|
||
* Security Profile - just make note of the one set there, should be default
|
||
* WPS mode - disable
|
||
* Country - pick yours
|
||
|
||
-------------
|
||
|
||
5ghz
|
||
|
||
* Wireless > open 5ghz interface > Wireless tab > click Advanced Mode > in this tab
|
||
* change Mode from station to ap bridge
|
||
* change Band to 5Ghz- N/AC
|
||
* Channel Width 20/40/80Mhz XXXX
|
||
* Frequency - auto?
|
||
* SSID - pick a name
|
||
* Radio Name - if you you want to distingush between APs with same SSID?
|
||
* Skip DFS channels - all
|
||
* Security Profile - just make note of the one set there, should be default
|
||
* WPS mode - disable
|
||
* Country - pick yours
|
||
|
||
---------------
|
||
|
||
security
|
||
|
||
* Wireless > Security Profiles > default
|
||
* change Mode to dynamic keys
|
||
* check WPA PSK and WPA2 PSK
|
||
* set passwords in WPA/WPA2 pre-shared key inputs
|
||
|
||
------------
|