selfhosted-apps-docker/trueNASscale

TrueNAS SCALE

guide-by-example

WORK IN PROGRESS
WORK IN PROGRESS
WORK IN PROGRESS

Purpose & Overview

Network storage operating system managed through web GUI.

• Official site
• Forums

Based on debian linux with ZFS file system is at the core. Running nginx and using python and django for the web interface.

note - There are links to the official documentation in subsections, its of decent quality, with pictures and videos and it should be up-to-date.

ZFS for Dummies

My specific use case

My home server runs ESXi.
TrueNAS is one of the virtual machines, with Fujitsu D3307 flashed in to IT Mode and pass-through in to the VM so that truenas has direct access to the disks, without any in between layer. If I would have not lucked out with the HBA card, I would be buying Fujitsu 9211-8i from ebay.

I hold strong opinion on backups > raid.
And I also have only few drives. So I make just little use of zfs raid features and use it just as nice web GUI for samba and nfs sharing.

Good alterntive worth mention - openmediavault, but truenas seems a bigger player.

Installation as a VM in VMware ESXi

The official documentation.

Make sure the Esxi host has correc time and ntp sync.

• download ISO
• upload it to ESXi datastore
• create new VM
  • Guest OS family - linux
  • Guest OS version - Debian 64-bit
  • give it 2 cpu cores
  • give it 4GB RAM with sub-setting: Reserve all guest memory (All locked)
  • give it 50GB disk space
  • mount ISO in to the dvd drive
  • SCSI Controller was left at default - vmware paravirtual
  • switch tab and change boot from bios to uefi
• click through the Installation
• pick admin user and set password
• login, shutdown
• ESXi - edit VM, add other device, PCI device, should be listed HBA card thats passthrough so that truenas has direct disks access

---

---

Basic Setup

Static IP address

• turn off dhcp and set static ip and mask
  Network > Interfaces
  uncheck DHCP; Add Aliases, IP address=10.0.19.11; mask=24
  on save it asks for the gateway IP
• set hostname, DNS server and enable netbios discovery
  Network > Global Configuration > Settings
  check NetBIOS-NS; set hostname; set dns if it's not

Set time

• Set time zone and date format
  System Settings > General > Localization > Settings
  Timezone=Europe/Bratislava; Date Format=2 Jan 2023

If there are issues with the time... enable ssh service, ssh in to the truenas check few things

• timedatectl - general time info
• sudo ntpq -p - lists configured ntp servers, the symbols in the first column +, -, * note the use
• sudo ntpq -c sysinfo - operational summary
• sudo ntpd -g -x -q pool.ntp.org - force sync to a pool
• sudo sntp pool.ntp.org - force sync to a pool
• systemctl status ntp.service - check service status
• sudo journalctl -u ntp.service - check journal info of the service
• sudo systemctl restart ntp.service - restart the service
• cat /etc/ntp.conf - check the config
• sudo hwclock --systohc --utc - set utc time to rtc clock, hardware clock runnin in bios

I faced an issue of time being out of sync after restarts and ntpq command failing to connect. Reason for this was Esxi host not having default gateway correctly set and so never being able to sync its time.

Pools and Datasets

Pool

The official documentation.

Pool is like a virtual unformated hard drive. Can't be mounted, cant be used without "partitioning" it first. But it is at the creation of pool where "raid" is set.

• start creating a pool
  Storage > Create Pool button
  name it; I prefer to not encrypt, that comes with datasets
• assign physical disks to the pool's default VDev, if needed, more VDevs can be added
  select "raid" type for the VDev - stripe, mirror
• Create

For destruction of a pool - Storage > Export/Disconnect button

Dataset

The official documentation.

Dataset is like a partition in the classical terms. It's where filesystem actually comes to play, with all the good stuff like mount, access, quotas, compression, snapshots,...

• start creating a dataset
  Datasets > Add Dataset button
  name it; I prefer to turn off compression
• set encryption to passphrase if desired
  this encryption prevents access to the data after shutdown, nothing to do with sharing
• set Case sensitivity to Insensitive if windows will be accessing this dataset
• set Share Type to SMB if planning to share with SMB, which is the most used way to share, especially for windows or mixed access

Zvol

Zvol is a direct alternative to dataset.
When planning to use iScsi with its approach of mounting network storage as a block device. This provides great speeds with small files, but at the cost of space.

---

---

SMB share

Should be go-to for most cases, as all systems(win, linux, mac, android, ios) have mature reliable smb clients.

To see connected users, SSH in and sudo smbstatus -b

• Windows (SMB) Shares > Add
• set path to the dataset to share
• set the name under which it will be shared
• set Purpose if there is a special case
• on save the service will be enabled, if its not already

Now to deal with the permissions
There are two type of permissions accessible through icons in the share view

• Share ACL - set to allow everyone by default
• Edit Filesystem ACL - where one actually wants to control permissions

Create smb user and allow the access to the share

• Credentials > Local Users > Add
• set user name, for example: smb_usr
  note the default UID for very first account added manually being 3000
• set password
• switch to Shares > Edit Filesystem ACL (shield icon)
• in Edit ACL > Add Item > smb_usr
• set desired permissions

Trying to access the IP of truenas instance with the now set credentials should allow full access to the share.

Worth noting that it's the UID number that identifies users, not the username.

SMB share for everyone

One might think that just allowing group everyone@ access is enough. But when someone connects to a share, there must be a username used. For this a guest account needs to be enabled, which under the hood is named nobody

• in Shares > Windows (SMB) Shares > edit the share
• Advanced Options > Allow Guest Access

Mounting network share at boot

Using systemd. And the instructions from arch wiki.

I prefer setting permissions in the unit

check your user id $whoami for uid and gid

/etc/systemd/system/mnt-bigdisk.mount

[Unit]
Description=12TB truenas mount

[Mount]
What=//10.0.19.11/Dataset-01
Where=/mnt/bigdisk
Options=rw,username=bastard,password=lalala,file_mode=0644,dir_mode=0755,uid=1000,gid=1000
Type=cifs
TimeoutSec=10

[Install]
WantedBy=multi-user.target

/etc/systemd/system/mnt-bigdisk.automount

[Unit]
Description=12TB truenas mount

[Automount]
Where=/mnt/bigdisk

[Install]
WantedBy=multi-user.target

---

---

NFS share

Linux to linux file sharing. Simple.

Before creation of nfs share, a linux permission group should be planned to use.
Lets say that a group named nfs with gid 1100

on linux client machine

• sudo groupadd -g 1100 nfs - create the group
• sudo gpasswd -a bastard nfs - add the user in to the group
• log out, log in, check with id

Now on truenas the new group is created and set for the dataset and NFSv4 share is set.

• create nfs group with guid 1100
  Credentials > Local Groups > Add > GID = 1100; Name = nfs
• create new Dataset
  Datasets > Add Dataset > Name it; keep defaults
• set nfs group for this dataset root Datasets > Permissions (scroll down, bottom right) > Edit
  Group = nfs; check Apply Group; check Apply permissions recursively
  Save
• switch NFS to version 4
  Shares > UNIX (NFS) Shares > three dots > Config Service
  check Enable NFSv4; check NFSv3 ownership model for NFSv4
  Save
• Set nfs share
  Shares > UNIX (NFS) Shares > Add
  pick path to the dataset
  Save

Test mounting on client machine, in my case arch linux machine, here is wiki on nfs

• check you see the share showmount -e 10.0.19.11
• mount the share sudo mount 10.0.19.11:/mnt/Pool-02/sun/ ~/temp
• should work can check version using nfsstat -m or rpcinfo -p 10.0.19.11

Mounting network share at boot

Using systemd. And the instructions from arch wiki.

/etc/systemd/system/mnt-truenas.mount

[Unit]
Description=Truenas 6TB in stripe

[Mount]
What=10.0.19.11:/mnt/Pool-02/sun
Where=/mnt/truenas
Options=vers=4
Type=nfs
TimeoutSec=10

[Install]
WantedBy=multi-user.target

/etc/systemd/system/mnt-truenas.automount

[Unit]
Description=Truenas 6TB in stripe

[Automount]
Where=/mnt/truenas

[Install]
WantedBy=multi-user.target

---

---

iSCSI share

The official documentation.

Sharing disk space as a block device over network. Great perfromance, especially if lot of I/O small files stuff. Only single client can work with the block device at once.

• target - a storage we want to make available over network
• initiator - a device connecting to a target
• portal - they say IP and port pair, but part of it is also authentication

both target and initiator must be assigned IQN - iSCSI Qualified Name
name format: iqn.yyyy-mm.naming-authority:unique name
examples:
iqn.2016-04.com.open-iscsi:4ab2905b66ca
iqn.2005-10.org.freenas.ctl:garbage
iqn.1991-05.com.microsoft:tester-81

assuming all sections (portals, Initators groups, Authgorized access, targets, extents,..) are empty and doing it first time

• create a new Zvol
  Datasets > Add Zvol button
  set Name; set Size, they recommend less than 80% of the pool but can be forced higher;

• click through iSCSI share wizzard or do the manual setup
  Shares > Block (iSCSI) Shares Targets > ...
  

Manual setup

• Target Global Configuration
  nothing really worth changing
• Portals
  add some description and set IP of the truenas
  
• Initiator
  add some description and for now check Allow All Initiators
• Authorized Access
  skip
• Targets
  set name; set portal group; set initiator group; authentication kept none
• Extents
  set name; device=some zvol; Logical Block Size=4096
• Associated Targets
  set target; LUN ID=0; set extent

Enable iSCSI service.

To test if it works.
On windows just launching iscsicpl.exe and refreshing, connect, should work.

On arch linux there is a good and detailed instructions on the wiki.

• install open-iscsi
• start service sudo systemctl start iscsid.service
  do not enable it just start it to test
  to have it present after boot:
  • sudo systemctl enable iscsi.service
  • edit /etc/iscsi/nodes/../default and set node.startup = automatic
  • apply systemd mount files
• discover targets at the ip
  sudo iscsiadm --mode discovery --portal 10.0.19.11 --type sendtargets
  after this command a new directory is created /etc/iscsi/nodes/
• login to all available targets sudo iscsiadm -m node -L all
• see availabl block devices
  lsblks

Encryption setup using fs

very well written arch wiki page

• format the iscsi disk
  sudo mkfs.ext4 -O encrypt /dev/sdb1
  or enable it with sudo tune2fs -O encrypt /dev/device
• mount it lets say /mnt/target1
• install fscrypt
  sudo pacman -S fscrypt
• enable it on the system fscrypt setup
• enable it on the mounted partition sudo fscrypt setup /mnt/target1
• create a directory there as you cant encrypt root of a partition
• encrypt the directory fscrypt encrypt /mnt/target1/homework
• lock fscrypt lock /mnt/target1/homework
• lock fscrypt unlock /mnt/target1/homework

systemd mount files

/etc/systemd/system/mnt-target1.mount

[Unit]
Before=remote-fs.target
After=iscsi.service 
Requires=iscsi.service
Description=iscasi test share

[Mount]
What=/dev/disk/by-uuid/58b83770-2c68-463e-9ea4-6f62ef8c001d
Where=/mnt/target1
Type=ext4
Options=_netdev,noatime

[Install]
WantedBy=multi-user.target

/etc/systemd/system/mnt-bigdisk.automount

[Unit]
Description=iscasi test share

[Automount]
Where=/mnt/target1

[Install]
WantedBy=multi-user.target

• /etc/iscsi/nodes - where targets are added
• /etc/iscsi/initiatorname.iscsi - machines id
• /etc/iscsi/iscsid.conf - general config

---

---

Data protection settings

• enable autoamtic smart short tests
  Data Protection > S.M.A.R.T. Tests > Add > all disks/short/weekly
• enable autoamtic snapshots

Testing access to ZFS disks on a desktop

Reinstall and import of pools

Update

Backup and restore