.TH "scrcpy" "1" .SH NAME scrcpy \- Display and control your Android device .SH SYNOPSIS .B scrcpy .RI [ options ] .SH DESCRIPTION .B scrcpy provides display and control of Android devices connected on USB (or over TCP/IP). It does not require any root access. .SH OPTIONS .TP .B \-\-always\-on\-top Make scrcpy window always on top (above other windows). .TP .BI "\-\-audio\-bit\-rate " value Encode the audio at the given bit rate, expressed in bits/s. Unit suffixes are supported: '\fBK\fR' (x1000) and '\fBM\fR' (x1000000). Default is 128K (128000). .TP .BI "\-\-audio\-buffer " ms Configure the audio buffering delay (in milliseconds). Lower values decrease the latency, but increase the likelyhood of buffer underrun (causing audio glitches). Default is 50. .TP .BI "\-\-audio\-codec " name Select an audio codec (opus, aac, flac or raw). Default is opus. .TP .BI "\-\-audio\-codec\-options " key\fR[:\fItype\fR]=\fIvalue\fR[,...] Set a list of comma-separated key:type=value options for the device audio encoder. The possible values for 'type' are 'int' (default), 'long', 'float' and 'string'. The list of possible codec options is available in the Android documentation: .TP .BI "\-\-audio\-encoder " name Use a specific MediaCodec audio encoder (depending on the codec provided by \fB\-\-audio\-codec\fR). The available encoders can be listed by \fB\-\-list\-encoders\fR. .TP .BI "\-\-audio\-source " source Select the audio source (output or mic). Default is output. .TP .BI "\-\-audio\-output\-buffer " ms Configure the size of the SDL audio output buffer (in milliseconds). If you get "robotic" audio playback, you should test with a higher value (10). Do not change this setting otherwise. Default is 5. .TP .BI "\-b, \-\-video\-bit\-rate " value Encode the video at the given bit rate, expressed in bits/s. Unit suffixes are supported: '\fBK\fR' (x1000) and '\fBM\fR' (x1000000). Default is 8M (8000000). .TP .BI "\-\-camera\-ar " ar Select the camera size by its aspect ratio (+/- 10%). Possible values are "sensor" (use the camera sensor aspect ratio), "\fInum\fR:\fIden\fR" (e.g. "4:3") and "\fIvalue\fR" (e.g. "1.6"). .TP .B \-\-camera\-high\-speed Enable high-speed camera capture mode. This mode is restricted to specific resolutions and frame rates, listed by \fB\-\-list\-camera\-sizes\fR. .TP .BI "\-\-camera\-id " id Specify the device camera id to mirror. The available camera ids can be listed by \fB\-\-list\-cameras\fR. .TP .BI "\-\-camera\-facing " facing Select the device camera by its facing direction. Possible values are "front", "back" and "external". .TP .BI "\-\-camera\-fps " fps Specify the camera capture frame rate. If not specified, Android's default frame rate (30 fps) is used. .TP .BI "\-\-camera\-size " width\fRx\fIheight Specify an explicit camera capture size. .TP .BI "\-\-crop " width\fR:\fIheight\fR:\fIx\fR:\fIy Crop the device screen on the server. The values are expressed in the device natural orientation (typically, portrait for a phone, landscape for a tablet). Any .B \-\-max\-size value is computed on the cropped size. .TP .B \-d, \-\-select\-usb Use USB device (if there is exactly one, like adb -d). Also see \fB\-e\fR (\fB\-\-select\-tcpip\fR). .TP .BI "\-\-disable\-screensaver" Disable screensaver while scrcpy is running. .TP .BI "\-\-display\-buffer " ms Add a buffering delay (in milliseconds) before displaying. This increases latency to compensate for jitter. Default is 0 (no buffering). .TP .BI "\-\-display\-id " id Specify the device display id to mirror. The available display ids can be listed by \fB\-\-list\-displays\fR. Default is 0. .TP .BI "\-\-display\-orientation " value Set the initial display orientation. Possible values are 0, 90, 180, 270, flip0, flip90, flip180 and flip270. The number represents the clockwise rotation in degrees; the "flip" keyword applies a horizontal flip before the rotation. Default is 0. .TP .B \-e, \-\-select\-tcpip Use TCP/IP device (if there is exactly one, like adb -e). Also see \fB\-d\fR (\fB\-\-select\-usb\fR). .TP .B \-f, \-\-fullscreen Start in fullscreen. .TP .B \-\-force\-adb\-forward Do not attempt to use "adb reverse" to connect to the device. .TP .B \-\-forward\-all\-clicks By default, right-click triggers BACK (or POWER on) and middle-click triggers HOME. This option disables these shortcuts and forward the clicks to the device instead. .TP .B \-h, \-\-help Print this help. .TP .B \-K Same as \fB\-\-keyboard=uhid\fR. .TP .BI "\-\-keyboard " mode Select how to send keyboard inputs to the device. Possible values are "disabled", "sdk", "uhid" and "aoa": - "disabled" does not send keyboard inputs to the device. - "sdk" uses the Android system API to deliver keyboard events to applications. - "uhid" simulates a physical HID keyboard using the Linux HID kernel module on the device. - "aoa" simulates a physical HID keyboard using the AOAv2 protocol. It may only work over USB. For "uhid" and "aoa", the keyboard layout must be configured (once and for all) on the device, via Settings -> System -> Languages and input -> Physical keyboard. This settings page can be started directly using the shortcut MOD+k (except in OTG mode), or by executing: adb shell am start -a android.settings.HARD_KEYBOARD_SETTINGS This option is only available when the HID keyboard is enabled (or a physical keyboard is connected). Also see \fB\-\-mouse\fR. .TP .B \-\-kill\-adb\-on\-close Kill adb when scrcpy terminates. .TP .B \-\-legacy\-paste Inject computer clipboard text as a sequence of key events on Ctrl+v (like MOD+Shift+v). This is a workaround for some devices not behaving as expected when setting the device clipboard programmatically. .TP .B \-\-list\-camera\-sizes List the valid camera capture sizes. .TP .B \-\-list\-cameras List cameras available on the device. .TP .B \-\-list\-encoders List video and audio encoders available on the device. .TP .B \-\-list\-displays List displays available on the device. .TP \fB\-\-lock\-video\-orientation\fR[=\fIvalue\fR] Lock capture video orientation to \fIvalue\fR. Possible values are "unlocked", "initial" (locked to the initial orientation), 0, 90, 180, and 270. The values represent the clockwise rotation from the natural device orientation, in degrees. Default is "unlocked". Passing the option without argument is equivalent to passing "initial". .TP .BI "\-m, \-\-max\-size " value Limit both the width and height of the video to \fIvalue\fR. The other dimension is computed so that the device aspect\-ratio is preserved. Default is 0 (unlimited). .TP .B \-M Same as \fB\-\-mouse=uhid\fR. .TP .BI "\-\-max\-fps " value Limit the framerate of screen capture (officially supported since Android 10, but may work on earlier versions). .TP .BI "\-\-mouse " mode Select how to send mouse inputs to the device. Possible values are "disabled", "sdk", "uhid" and "aoa": - "disabled" does not send mouse inputs to the device. - "sdk" uses the Android system API to deliver mouse events to applications. - "uhid" simulates a physical HID mouse using the Linux HID kernel module on the device. - "aoa" simulates a physical mouse using the AOAv2 protocol. It may only work over USB. In "uhid" and "aoa" modes, the computer mouse is captured to control the device directly (relative mouse mode). LAlt, LSuper or RSuper toggle the capture mode, to give control of the mouse back to the computer. Also see \fB\-\-keyboard\fR. .TP .B \-n, \-\-no\-control Disable device control (mirror the device in read\-only). .TP .B \-N, \-\-no\-playback Disable video and audio playback on the computer (equivalent to \fB\-\-no\-video\-playback \-\-no\-audio\-playback\fR). .TP .B \-\-no\-audio Disable audio forwarding. .TP .B \-\-no\-audio\-playback Disable audio playback on the computer. .TP .B \-\-no\-cleanup By default, scrcpy removes the server binary from the device and restores the device state (show touches, stay awake and power mode) on exit. This option disables this cleanup. .TP .B \-\-no\-clipboard\-autosync By default, scrcpy automatically synchronizes the computer clipboard to the device clipboard before injecting Ctrl+v, and the device clipboard to the computer clipboard whenever it changes. This option disables this automatic synchronization. .TP .B \-\-no\-downsize\-on\-error By default, on MediaCodec error, scrcpy automatically tries again with a lower definition. This option disables this behavior. .TP .B \-\-no\-key\-repeat Do not forward repeated key events when a key is held down. .TP .B \-\-no\-mipmaps If the renderer is OpenGL 3.0+ or OpenGL ES 2.0+, then mipmaps are automatically generated to improve downscaling quality. This option disables the generation of mipmaps. .TP .B \-\-no\-power\-on Do not power on the device on start. .TP .B \-\-no\-video Disable video forwarding. .TP .B \-\-no\-video\-playback Disable video playback on the computer. .TP .BI "\-\-orientation " value Same as --display-orientation=value --record-orientation=value. .TP .B \-\-otg Run in OTG mode: simulate physical keyboard and mouse, as if the computer keyboard and mouse were plugged directly to the device via an OTG cable. In this mode, adb (USB debugging) is not necessary, and mirroring is disabled. LAlt, LSuper or RSuper toggle the mouse capture mode, to give control of the mouse back to the computer. If any of \fB\-\-hid\-keyboard\fR or \fB\-\-hid\-mouse\fR is set, only enable keyboard or mouse respectively, otherwise enable both. It may only work over USB. See \fB\-\-hid\-keyboard\fR and \fB\-\-hid\-mouse\fR. .TP .BI "\-p, \-\-port " port\fR[:\fIport\fR] Set the TCP port (range) used by the client to listen. Default is 27183:27199. .TP \fB\-\-pause\-on\-exit\fR[=\fImode\fR] Configure pause on exit. Possible values are "true" (always pause on exit), "false" (never pause on exit) and "if-error" (pause only if an error occured). This is useful to prevent the terminal window from automatically closing, so that error messages can be read. Default is "false". Passing the option without argument is equivalent to passing "true". .TP .B \-\-power\-off\-on\-close Turn the device screen off when closing scrcpy. .TP .B \-\-prefer\-text Inject alpha characters and space as text events instead of key events. This avoids issues when combining multiple keys to enter special characters, but breaks the expected behavior of alpha keys in games (typically WASD). .TP .B "\-\-print\-fps Start FPS counter, to print framerate logs to the console. It can be started or stopped at any time with MOD+i. .TP .BI "\-\-push\-target " path Set the target directory for pushing files to the device by drag & drop. It is passed as\-is to "adb push". Default is "/sdcard/Download/". .TP .BI "\-r, \-\-record " file Record screen to .IR file . The format is determined by the .B \-\-record\-format option if set, or by the file extension. .TP .B \-\-raw\-key\-events Inject key events for all input keys, and ignore text events. .TP .BI "\-\-record\-format " format Force recording format (mp4, mkv, m4a, mka, opus, aac, flac or wav). .TP .BI "\-\-record\-orientation " value Set the record orientation. Possible values are 0, 90, 180 and 270. The number represents the clockwise rotation in degrees. Default is 0. .TP .BI "\-\-render\-driver " name Request SDL to use the given render driver (this is just a hint). Supported names are currently "direct3d", "opengl", "opengles2", "opengles", "metal" and "software". .TP .B \-\-require\-audio By default, scrcpy mirrors only the video if audio capture fails on the device. This option makes scrcpy fail if audio is enabled but does not work. .TP .BI "\-s, \-\-serial " number The device serial number. Mandatory only if several devices are connected to adb. .TP .B \-S, \-\-turn\-screen\-off Turn the device screen off immediately. .TP .BI "\-\-shortcut\-mod " key\fR[+...]][,...] Specify the modifiers to use for scrcpy shortcuts. Possible keys are "lctrl", "rctrl", "lalt", "ralt", "lsuper" and "rsuper". A shortcut can consist in several keys, separated by '+'. Several shortcuts can be specified, separated by ','. For example, to use either LCtrl+LAlt or LSuper for scrcpy shortcuts, pass "lctrl+lalt,lsuper". Default is "lalt,lsuper" (left-Alt or left-Super). .TP .B \-t, \-\-show\-touches Enable "show touches" on start, restore the initial value on exit. It only shows physical touches (not clicks from scrcpy). .TP .BI "\-\-tcpip\fR[=\fIip\fR[:\fIport\fR]] Configure and reconnect the device over TCP/IP. If a destination address is provided, then scrcpy connects to this address before starting. The device must listen on the given TCP port (default is 5555). If no destination address is provided, then scrcpy attempts to find the IP address and adb port of the current device (typically connected over USB), enables TCP/IP mode if necessary, then connects to this address before starting. .TP .BI "\-\-time\-limit " seconds Set the maximum mirroring time, in seconds. .TP .BI "\-\-tunnel\-host " ip Set the IP address of the adb tunnel to reach the scrcpy server. This option automatically enables \fB\-\-force\-adb\-forward\fR. Default is localhost. .TP .BI "\-\-tunnel\-port " port Set the TCP port of the adb tunnel to reach the scrcpy server. This option automatically enables \fB\-\-force\-adb\-forward\fR. Default is 0 (not forced): the local port used for establishing the tunnel will be used. .TP .B \-v, \-\-version Print the version of scrcpy. .TP .BI "\-V, \-\-verbosity " value Set the log level ("verbose", "debug", "info", "warn" or "error"). Default is "info" for release builds, "debug" for debug builds. .TP .BI "\-\-v4l2-sink " /dev/videoN Output to v4l2loopback device. It requires to lock the video orientation (see \fB\-\-lock\-video\-orientation\fR). .TP .BI "\-\-v4l2-buffer " ms Add a buffering delay (in milliseconds) before pushing frames. This increases latency to compensate for jitter. This option is similar to \fB\-\-display\-buffer\fR, but specific to V4L2 sink. Default is 0 (no buffering). .TP .BI "\-\-video\-codec " name Select a video codec (h264, h265 or av1). Default is h264. .TP .BI "\-\-video\-codec\-options " key\fR[:\fItype\fR]=\fIvalue\fR[,...] Set a list of comma-separated key:type=value options for the device video encoder. The possible values for 'type' are 'int' (default), 'long', 'float' and 'string'. The list of possible codec options is available in the Android documentation: .TP .BI "\-\-video\-encoder " name Use a specific MediaCodec video encoder (depending on the codec provided by \fB\-\-video\-codec\fR). The available encoders can be listed by \fB\-\-list\-encoders\fR. .TP .BI "\-\-video\-source " source Select the video source (display or camera). Camera mirroring requires Android 12+. Default is display. .TP .B \-w, \-\-stay-awake Keep the device on while scrcpy is running, when the device is plugged in. .TP .B \-\-window\-borderless Disable window decorations (display borderless window). .TP .BI "\-\-window\-title " text Set a custom window title. .TP .BI "\-\-window\-x " value Set the initial window horizontal position. Default is "auto". .TP .BI "\-\-window\-y " value Set the initial window vertical position. Default is "auto". .TP .BI "\-\-window\-width " value Set the initial window width. Default is 0 (automatic). .TP .BI "\-\-window\-height " value Set the initial window height. Default is 0 (automatic). .SH EXIT STATUS .B scrcpy will exit with code 0 on normal program termination. If an initial connection cannot be established, the exit code 1 will be returned. If the device disconnects while a session is active, exit code 2 will be returned. .SH SHORTCUTS In the following list, MOD is the shortcut modifier. By default, it's (left) Alt or (left) Super, but it can be configured by \fB\-\-shortcut\-mod\fR (see above). .TP .B MOD+f Switch fullscreen mode .TP .B MOD+Left Rotate display left .TP .B MOD+Right Rotate display right .TP .B MOD+Shift+Left, MOD+Shift+Right Flip display horizontally .TP .B MOD+Shift+Up, MOD+Shift+Down Flip display vertically .TP .B MOD+g Resize window to 1:1 (pixel\-perfect) .TP .B MOD+w, Double\-click on black borders Resize window to remove black borders .TP .B MOD+h, Home, Middle\-click Click on HOME .TP .B MOD+b, MOD+Backspace, Right\-click (when screen is on) Click on BACK .TP .B MOD+s Click on APP_SWITCH .TP .B MOD+m Click on MENU .TP .B MOD+Up Click on VOLUME_UP .TP .B MOD+Down Click on VOLUME_DOWN .TP .B MOD+p Click on POWER (turn screen on/off) .TP .B Right\-click (when screen is off) Turn screen on .TP .B MOD+o Turn device screen off (keep mirroring) .TP .B MOD+Shift+o Turn device screen on .TP .B MOD+r Rotate device screen .TP .B MOD+n Expand notification panel .TP .B MOD+Shift+n Collapse notification panel .TP .B Mod+c Copy to clipboard (inject COPY keycode, Android >= 7 only) .TP .B Mod+x Cut to clipboard (inject CUT keycode, Android >= 7 only) .TP .B MOD+v Copy computer clipboard to device, then paste (inject PASTE keycode, Android >= 7 only) .TP .B MOD+Shift+v Inject computer clipboard text as a sequence of key events .TP .B MOD+k Open keyboard settings on the device (for HID keyboard only) .TP .B MOD+i Enable/disable FPS counter (print frames/second in logs) .TP .B Ctrl+click-and-move Pinch-to-zoom and rotate from the center of the screen .TP .B Shift+click-and-move Tilt (slide vertically with two fingers) .TP .B Drag & drop APK file Install APK from computer .TP .B Drag & drop non-APK file Push file to device (see \fB\-\-push\-target\fR) .SH Environment variables .TP .B ADB Path to adb. .TP .B ANDROID_SERIAL Device serial to use if no selector (\fB-s\fR, \fB-d\fR, \fB-e\fR or \fB\-\-tcpip=\fIaddr\fR) is specified. .TP .B SCRCPY_ICON_PATH Path to the program icon. .TP .B SCRCPY_SERVER_PATH Path to the server binary. .SH AUTHORS .B scrcpy is written by Romain Vimont. This manual page was written by .MT mmyangfl@gmail.com Yangfl .ME for the Debian Project (and may be used by others). .SH "REPORTING BUGS" Report bugs to . .SH COPYRIGHT Copyright \(co 2018 Genymobile Copyright \(co 2018\-2024 Romain Vimont Licensed under the Apache License, Version 2.0. .SH WWW