Initially, if AOA initialization failed, default injection method was
used, in order to use the same command/shortcut when the device is
connected via USB or via TCP/IP, without changing the arguments.
Now that there are 3 keyboard modes, it seems unexpected to switch to
another specific mode if AOA fails (and it is inconsistent). If the user
explicitly requests AOA, then use AOA or fail.
Refs #2632 comment <https://github.com/Genymobile/scrcpy/pull/2632#issuecomment-945190859>
Use UHID output reports to synchronize CapsLock and VerrNum states.
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
There is a dependency cycle in the initialization order:
- keyboard depends on controller
- controller depends on acksync
- acksync depends on keyboard initialization
To break this cycle, bind the async instance to the controller in a
second step.
Rename {keyboard,mouse}_inject to {keyboard,mouse}_sdk.
All implementations "inject" key events and mouse events, what differs
is the mechanism. For these implementations, the Android SDK API is used
to inject events.
Note that the input mode enum variants were already renamed
(SC_KEYBOARD_INPUT_MODE_SDK and SC_MOUSE_INPUT_MODE_SDK).
Until now, there was two modes for keyboard and mouse:
- event injection using the Android system API (default)
- HID/AOA over USB
For this reason, the options were exposed as simple flags:
- -K or --hid-keyboard to enable physical keyboard simulation (AOA)
- -M or --hid-mouse to enable physical mouse simulation (AOA)
Replace them by explicit --keyboard and --mouse options, with 3 possible
values:
- disabled
- sdk (default)
- aoa
This will allow to add a new mode (uhid).
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
The SDL video subsystem may be initialized so that clipboard
synchronization works even without video playback.
But if the video subsystem initialization fails (e.g. because no video
device is available), consider it as an error only if video playback is
enabled.
Refs 5e59ed3135Fixes#4477 <https://github.com/Genymobile/scrcpy/issues/4477>
Add --camera-high-speed to enable high frame rate camera capture. If
the option is enabled, then --camera-fps is mandatory.
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Andrew Gunnerson <accounts+github@chiller3.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Add a new option for specifying the camera frame rate.
By default, Android's default frame rate (30 fps) is used.
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
Signed-off-by: Andrew Gunnerson <accounts+github@chiller3.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
In addition to --camera-size to specify an explicit size, make it
possible to select the camera size automatically, respecting the maximum
size (already used for display mirroring) and an aspect ratio.
For example, "scrcpy --video-source=camera" followed by:
- (no additional arguments)
: mirrors at the maximum size, any a-r
- -m1920
: only consider valid sizes having both dimensions not above 1920
- --camera-ar=4:3
: only consider valid sizes having an aspect ratio of 4:3 (+/- 10%)
- -m2048 --camera-ar=1.6
: only consider valid sizes having both dimensions not above 2048
and an aspect ratio of 1.6 (+/- 10%)
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
Co-authored-by: Simon Chan <1330321+yume-chan@users.noreply.github.com>
Add an option to select the camera by its lens facing (front, back or
external).
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
If --no-video was set, then device disconnection was not reported. To
avoid the problem, report device disconnection also on audio
end-of-stream (EOS).
If both video and audio are enabled, then a device disconnection event
will be sent twice, but only the first one will be handled (since it
makes scrcpy exit).
Fixes#4207 <https://github.com/Genymobile/scrcpy/issues/4207>
On some systems, the SDL audio callback is not called frequently enough
(for example it requests 5ms of samples every 10ms), because the output
buffer is too small.
By default, we want to use a small value (5ms) to minimize latency and
buffer underrun, but if it does not work well, users need a way to
increase it.
Refs #3793 <https://github.com/Genymobile/scrcpy/issues/3793>
On initial connection, scrcpy sent some device metadata:
- the device name (to be used as window title)
- the initial video size (before any frame or even SPS/PPS)
But it is better to provide the initial video size as part as the video
stream, so that it can be demuxed and exposed via AVCodecContext to
sinks.
This avoids to pass an explicit "initial frame size" for the screen, the
recorder and the v4l2 sink.
Expose an option to add a buffering delay (in milliseconds) before
playing audio.
This is similar to the options --display-buffer and --v4l2-buffer for
video frames.
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
Play the decoded audio using SDL.
The audio player frame sink receives the audio frames, resample them
and write them to a byte buffer (introduced by this commit).
On SDL audio callback (from an internal SDL thread), copy samples from
this byte buffer to the SDL audio buffer.
The byte buffer is protected by the SDL_AudioDeviceLock(), but it has
been designed so that the producer and the consumer may write and read
in parallel, provided that they don't access the same slices of the
ring-buffer buffer.
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
Co-authored-by: Simon Chan <1330321+yume-chan@users.noreply.github.com>
A delay buffer delayed all the frames except the first one, to open the
scrcpy window immediately and get a picture.
Make this feature optional, so that the delay buffer might also be used
for audio (especially for simulating a high delay for debugging).
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
The components needing delayed frames (sc_screen and sc_v4l2_sink)
managed a sc_video_buffer instance, which itself embedded a
sc_frame_buffer instance (to keep only the most recent frame).
In theory, these components should not be aware of delaying: they should
just receive AVFrames later, and only handle a sc_frame_buffer.
Therefore, refactor sc_delay_buffer as a frame source (it consumes)
frames) and a frame sink (it produces frames, after some delay), and
plug an instance in the pipeline only when a delay is requested.
This also removes the need for a specific sc_video_buffer.
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
By default, scrcpy mirrors only the video when audio capture fails on
the device. Add an option to force scrcpy to fail if audio is enabled
but does not work.
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
When audio capture fails on the device, scrcpy continues mirroring the
video stream. This allows to enable audio by default only when
supported.
However, if an audio configuration occurs (for example the user
explicitly selected an unknown audio encoder), this must be treated as
an error and scrcpy must exit.
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
Romain Vimont
Simon Chan
Andrew Gunnerson
Avinash Sonawane
Yan