diff --git a/doc/audio.md b/doc/audio.md
index ecae4468..30dd0f97 100644
--- a/doc/audio.md
+++ b/doc/audio.md
@@ -28,10 +28,17 @@ To disable only the audio playback, see [no playback](video.md#no-playback).
 
 ## Audio only
 
-To play audio only, disable the video:
+To play audio only, disable video and control:
 
 ```bash
-scrcpy --no-video
+scrcpy --no-video --no-control
+```
+
+To play audio without a window:
+
+```bash
+# --no-video and --no-control are implied by --no-window
+scrcpy --no-window
 # interrupt with Ctrl+C
 ```
 
diff --git a/doc/control.md b/doc/control.md
index e9fd9e9b..87897894 100644
--- a/doc/control.md
+++ b/doc/control.md
@@ -15,6 +15,31 @@ scrcpy -n   # short version
 Read [keyboard](keyboard.md) and [mouse](mouse.md).
 
 
+## Control only
+
+To control the device without mirroring:
+
+```bash
+scrcpy --no-video --no-audio
+```
+
+By default, mouse mode is switched to UHID if video mirroring is disabled (a
+relative mouse mode is required).
+
+To also use a UHID keyboard, set it explicitly:
+
+```bash
+scrcpy --no-video --no-audio --keyboard=uhid
+scrcpy --no-video --no-audio -K  # short version
+```
+
+To use AOA instead (over USB only):
+
+```bash
+scrcpy --no-video --no-audio --keyboard=aoa --mouse=aoa
+```
+
+
 ## Copy-paste
 
 Any time the Android clipboard changes, it is automatically synchronized to the
diff --git a/doc/otg.md b/doc/otg.md
index 3c7ed467..5f42ac9c 100644
--- a/doc/otg.md
+++ b/doc/otg.md
@@ -1,19 +1,21 @@
 # OTG
 
 By default, _scrcpy_ injects input events at the Android API level. As an
-alternative, when connected over USB, it is possible to send HID events, so that
-scrcpy behaves as if it was a physical keyboard and/or mouse connected to the
-Android device.
+alternative, it is possible to send HID events, so that scrcpy behaves as if it
+was a [physical keyboard] and/or a [physical mouse] connected to the Android
+device (see [keyboard](keyboard.md) and [mouse](mouse.md)).
 
-A special mode allows to control the device without mirroring, using AOA
-[keyboard](keyboard.md#aoa) and [mouse](mouse.md#aoa). Therefore, it is possible
-to run _scrcpy_ with only physical keyboard and mouse simulation (HID), as if
-the computer keyboard and mouse were plugged directly to the device via an OTG
-cable.
+[physical keyboard]: keyboard.md#physical-keyboard-simulation
+[physical mouse]: physical-keyboard-simulation
 
-In this mode, `adb` (USB debugging) is not necessary, and mirroring is disabled.
+A special mode (OTG) allows to control the device using AOA
+[keyboard](keyboard.md#aoa) and [mouse](mouse.md#aoa), without using _adb_ at
+all (so USB debugging is not necessary). In this mode, video and audio are
+disabled, and `--keyboard=aoa and `--mouse=aoa` are implicitly set.
 
-This is similar to `--keyboard=aoa --mouse=aoa`, but without mirroring.
+Therefore, it is possible to run _scrcpy_ with only physical keyboard and mouse
+simulation, as if the computer keyboard and mouse were plugged directly to the
+device via an OTG cable.
 
 To enable OTG mode:
 
@@ -23,7 +25,7 @@ scrcpy --otg
 scrcpy --otg -s 0123456789abcdef
 ```
 
-It is possible to disable HID keyboard or HID mouse:
+It is possible to disable keyboard or mouse:
 
 ```bash
 scrcpy --otg --keyboard=disabled
@@ -35,3 +37,22 @@ It only works if the device is connected over USB.
 ## OTG issues on Windows
 
 See [FAQ](/FAQ.md#otg-issues-on-windows).
+
+
+## Control only
+
+Note that the purpose of OTG is to control the device without USB debugging
+(adb).
+
+If you want to solely control the device without mirroring while USB debugging
+is enabled, then OTG mode is not necessary.
+
+Instead, disable video and audio, and select UHID (or AOA):
+
+```bash
+scrcpy --no-video --no-audio --keyboard=uhid --mouse=uhid
+scrcpy --no-video --no-audio -KM  # short version
+scrcpy --no-video --no-audio --keyboard=aoa --mouse=aoa
+```
+
+One benefit of UHID is that it also works wirelessly.
diff --git a/doc/recording.md b/doc/recording.md
index 216542e9..f1a5a6e7 100644
--- a/doc/recording.md
+++ b/doc/recording.md
@@ -58,12 +58,10 @@ orientation](video.md#orientation).
 
 ## No playback
 
-To disable playback while recording:
+To disable playback and control while recording:
 
 ```bash
-scrcpy --no-playback --record=file.mp4
-scrcpy -Nr file.mkv
-# interrupt recording with Ctrl+C
+scrcpy --no-playback --no-control --record=file.mp4
 ```
 
 It is also possible to disable video and audio playback separately:
@@ -73,6 +71,13 @@ It is also possible to disable video and audio playback separately:
 scrcpy --record=file.mkv --no-audio-playback
 ```
 
+To also disable the window:
+
+```bash
+scrcpy --no-playback --no-window --record=file.mp4
+# interrupt recording with Ctrl+C
+```
+
 ## Time limit
 
 To limit the recording time:
diff --git a/doc/window.md b/doc/window.md
index b5b73921..b72c716c 100644
--- a/doc/window.md
+++ b/doc/window.md
@@ -1,5 +1,14 @@
 # Window
 
+## Disable window
+
+To disable window (may be useful for recording or for playing audio only):
+
+```bash
+scrcpy --no-window --record=file.mp4
+# Ctrl+C to interrupt
+```
+
 ## Title
 
 By default, the window title is the device model. It can be changed: