Reorder options to maintain alphabetical order

app/scrcpy.1

@@ -33,14 +33,6 @@ Lower values decrease the latency, but increase the likelyhood of buffer underru
 
 Default is 50.
 
-.TP
-.BI "\-\-audio\-output\-buffer ms
-Configure the size of the SDL audio output buffer (in milliseconds).
-
-If you get "robotic" audio playback, you should test with a higher value (10). Do not change this setting otherwise.
-
-Default is 5.
-
 .TP
 .BI "\-\-audio\-codec " name
 Select an audio codec (opus, aac or raw).
@@ -63,6 +55,14 @@ Use a specific MediaCodec audio encoder (depending on the codec provided by \fB\
 
 The available encoders can be listed by \-\-list\-encoders.
 
+.TP
+.BI "\-\-audio\-output\-buffer ms
+Configure the size of the SDL audio output buffer (in milliseconds).
+
+If you get "robotic" audio playback, you should test with a higher value (10). Do not change this setting otherwise.
+
+Default is 5.
+
 .TP
 .BI "\-b, \-\-video\-bit\-rate " value
 Encode the video at the given bit\-rate, expressed in bits/s. Unit suffixes are supported: '\fBK\fR' (x1000) and '\fBM\fR' (x1000000).

app/src/cli.c

@@ -134,16 +134,6 @@ static const struct sc_option options[] = {
                 "likelyhood of buffer underrun (causing audio glitches).\n"
                 "Default is 50.",
     },
-    {
-        .longopt_id = OPT_AUDIO_OUTPUT_BUFFER,
-        .longopt = "audio-output-buffer",
-        .argdesc = "ms",
-        .text = "Configure the size of the SDL audio output buffer (in "
-                "milliseconds).\n"
-                "If you get \"robotic\" audio playback, you should test with "
-                "a higher value (10). Do not change this setting otherwise.\n"
-                "Default is 5.",
-    },
     {
         .longopt_id = OPT_AUDIO_CODEC,
         .longopt = "audio-codec",
@@ -171,6 +161,16 @@ static const struct sc_option options[] = {
                 "codec provided by --audio-codec).\n"
                 "The available encoders can be listed by --list-encoders.",
     },
+    {
+        .longopt_id = OPT_AUDIO_OUTPUT_BUFFER,
+        .longopt = "audio-output-buffer",
+        .argdesc = "ms",
+        .text = "Configure the size of the SDL audio output buffer (in "
+                "milliseconds).\n"
+                "If you get \"robotic\" audio playback, you should test with "
+                "a higher value (10). Do not change this setting otherwise.\n"
+                "Default is 5.",
+    },
     {
         .shortopt = 'b',
         .longopt = "video-bit-rate",