mirror of
https://github.com/rust-embedded/rust-raspberrypi-OS-tutorials.git
synced 2024-11-03 15:40:21 +00:00
2c3f705051
register-rs 1.0.0 now uses UnsafeCell internally, which means we lost the Copy derive on InMemoryRegister. Therefore, a small set of changes was needed in the MMU driver to dance around the static array init depending on a Copy type. |
||
|---|---|---|
| .. | ||
| .vscode | ||
| src | ||
| build.rs | ||
| Cargo.lock | ||
| Cargo.toml | ||
| Makefile | ||
| README.md | ||
Tutorial 08 - Timestamps
tl;dr
- We add abstractions for the architectural timer, implement it for
aarch64and use it to annotate prints with timestamps. - A
warn!()macro is added.
Test it
Check it out via chainboot (added in previous tutorial):
$ make chainboot
[...]
Minipush 1.0
[MP] ⏳ Waiting for /dev/ttyUSB0
[MP] ✅ Connected
__ __ _ _ _ _
| \/ (_)_ _ (_) | ___ __ _ __| |
| |\/| | | ' \| | |__/ _ \/ _` / _` |
|_| |_|_|_||_|_|____\___/\__,_\__,_|
Raspberry Pi 3
[ML] Requesting binary
[MP] ⏩ Pushing 12 KiB =========================================🦀 100% 0 KiB/s Time: 00:00:00
[ML] Loaded! Executing the payload now
[ 0.586140] Booting on: Raspberry Pi 3
[ 0.587227] Architectural timer resolution: 52 ns
[ 0.589530] Drivers loaded:
[ 0.590876] 1. BCM GPIO
[ 0.592309] 2. BCM PL011 UART
[W 0.594005] Spin duration smaller than architecturally supported, skipping
[ 0.597392] Spinning for 1 second
[ 1.599001] Spinning for 1 second
[ 2.599872] Spinning for 1 second
Diff to previous
Binary files 07_uart_chainloader/demo_payload_rpi3.img and 08_timestamps/demo_payload_rpi3.img differ
Binary files 07_uart_chainloader/demo_payload_rpi4.img and 08_timestamps/demo_payload_rpi4.img differ
diff -uNr 07_uart_chainloader/Makefile 08_timestamps/Makefile
--- 07_uart_chainloader/Makefile
+++ 08_timestamps/Makefile
@@ -21,8 +21,7 @@
OBJDUMP_BINARY = aarch64-none-elf-objdump
NM_BINARY = aarch64-none-elf-nm
LINKER_FILE = src/bsp/raspberrypi/link.ld
- RUSTC_MISC_ARGS = -C target-cpu=cortex-a53 -C relocation-model=pic
- CHAINBOOT_DEMO_PAYLOAD = demo_payload_rpi3.img
+ RUSTC_MISC_ARGS = -C target-cpu=cortex-a53
else ifeq ($(BSP),rpi4)
TARGET = aarch64-unknown-none-softfloat
KERNEL_BIN = kernel8.img
@@ -32,8 +31,7 @@
OBJDUMP_BINARY = aarch64-none-elf-objdump
NM_BINARY = aarch64-none-elf-nm
LINKER_FILE = src/bsp/raspberrypi/link.ld
- RUSTC_MISC_ARGS = -C target-cpu=cortex-a72 -C relocation-model=pic
- CHAINBOOT_DEMO_PAYLOAD = demo_payload_rpi4.img
+ RUSTC_MISC_ARGS = -C target-cpu=cortex-a72
endif
# Export for build.rs
@@ -75,8 +73,7 @@
EXEC_QEMU = $(QEMU_BINARY) -M $(QEMU_MACHINE_TYPE)
EXEC_MINIPUSH = ruby ../utils/minipush.rb
-.PHONY: all $(KERNEL_ELF) $(KERNEL_BIN) doc qemu qemuasm chainboot clippy clean readelf objdump nm \
- check
+.PHONY: all $(KERNEL_ELF) $(KERNEL_BIN) doc qemu chainboot clippy clean readelf objdump nm check
all: $(KERNEL_BIN)
@@ -90,18 +87,15 @@
$(DOC_CMD) --document-private-items --open
ifeq ($(QEMU_MACHINE_TYPE),)
-qemu qemuasm:
+qemu:
@echo "This board is not yet supported for QEMU."
else
qemu: $(KERNEL_BIN)
@$(DOCKER_QEMU) $(EXEC_QEMU) $(QEMU_RELEASE_ARGS) -kernel $(KERNEL_BIN)
-
-qemuasm: $(KERNEL_BIN)
- @$(DOCKER_QEMU) $(EXEC_QEMU) $(QEMU_RELEASE_ARGS) -kernel $(KERNEL_BIN) -d in_asm
endif
-chainboot:
- @$(DOCKER_CHAINBOOT) $(EXEC_MINIPUSH) $(DEV_SERIAL) $(CHAINBOOT_DEMO_PAYLOAD)
+chainboot: $(KERNEL_BIN)
+ @$(DOCKER_CHAINBOOT) $(EXEC_MINIPUSH) $(DEV_SERIAL) $(KERNEL_BIN)
clippy:
RUSTFLAGS="$(RUSTFLAGS_PEDANTIC)" $(CLIPPY_CMD)
@@ -113,10 +107,7 @@
readelf --headers $(KERNEL_ELF)
objdump: $(KERNEL_ELF)
- @$(DOCKER_ELFTOOLS) $(OBJDUMP_BINARY) --disassemble --demangle \
- --section .text \
- --section .got \
- $(KERNEL_ELF) | rustfilt
+ @$(DOCKER_ELFTOOLS) $(OBJDUMP_BINARY) --disassemble --demangle $(KERNEL_ELF) | rustfilt
nm: $(KERNEL_ELF)
@$(DOCKER_ELFTOOLS) $(NM_BINARY) --demangle --print-size $(KERNEL_ELF) | sort | rustfilt
diff -uNr 07_uart_chainloader/src/_arch/aarch64/cpu.rs 08_timestamps/src/_arch/aarch64/cpu.rs
--- 07_uart_chainloader/src/_arch/aarch64/cpu.rs
+++ 08_timestamps/src/_arch/aarch64/cpu.rs
@@ -21,12 +21,12 @@
#[naked]
#[no_mangle]
pub unsafe fn _start() -> ! {
- use crate::relocate;
+ use crate::runtime_init;
// Expect the boot core to start in EL2.
if bsp::cpu::BOOT_CORE_ID == cpu::smp::core_id() {
SP.set(bsp::memory::boot_core_stack_end() as u64);
- relocate::relocate_self()
+ runtime_init::runtime_init()
} else {
// If not core0, infinitely wait for events.
wait_forever()
@@ -39,15 +39,6 @@
pub use asm::nop;
-/// Spin for `n` cycles.
-#[cfg(feature = "bsp_rpi3")]
-#[inline(always)]
-pub fn spin_for_cycles(n: usize) {
- for _ in 0..n {
- asm::nop();
- }
-}
-
/// Pause execution on the core.
#[inline(always)]
pub fn wait_forever() -> ! {
@@ -55,19 +46,3 @@
asm::wfe()
}
}
-
-/// Branch to a raw integer value.
-///
-/// # Safety
-///
-/// - This is highly unsafe. Use with care.
-#[inline(always)]
-pub unsafe fn branch_to_raw_addr(addr: usize) -> ! {
- asm!(
- "blr {destination:x}",
- destination = in(reg) addr,
- options(nomem, nostack)
- );
-
- core::intrinsics::unreachable()
-}
diff -uNr 07_uart_chainloader/src/_arch/aarch64/time.rs 08_timestamps/src/_arch/aarch64/time.rs
--- 07_uart_chainloader/src/_arch/aarch64/time.rs
+++ 08_timestamps/src/_arch/aarch64/time.rs
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: MIT OR Apache-2.0
+//
+// Copyright (c) 2018-2020 Andre Richter <andre.o.richter@gmail.com>
+
+//! Architectural timer primitives.
+
+use crate::{time, warn};
+use core::time::Duration;
+use cortex_a::regs::*;
+
+//--------------------------------------------------------------------------------------------------
+// Private Definitions
+//--------------------------------------------------------------------------------------------------
+
+const NS_PER_S: u64 = 1_000_000_000;
+
+/// ARMv8 Generic Timer.
+struct GenericTimer;
+
+//--------------------------------------------------------------------------------------------------
+// Global instances
+//--------------------------------------------------------------------------------------------------
+
+static TIME_MANAGER: GenericTimer = GenericTimer;
+
+//--------------------------------------------------------------------------------------------------
+// Public Code
+//--------------------------------------------------------------------------------------------------
+
+/// Return a reference to the time manager.
+pub fn time_manager() -> &'static impl time::interface::TimeManager {
+ &TIME_MANAGER
+}
+
+//------------------------------------------------------------------------------
+// OS Interface Code
+//------------------------------------------------------------------------------
+
+impl time::interface::TimeManager for GenericTimer {
+ fn resolution(&self) -> Duration {
+ Duration::from_nanos(NS_PER_S / (CNTFRQ_EL0.get() as u64))
+ }
+
+ fn uptime(&self) -> Duration {
+ let frq: u64 = CNTFRQ_EL0.get() as u64;
+ let current_count: u64 = CNTPCT_EL0.get() * NS_PER_S;
+
+ Duration::from_nanos(current_count / frq)
+ }
+
+ fn spin_for(&self, duration: Duration) {
+ // Instantly return on zero.
+ if duration.as_nanos() == 0 {
+ return;
+ }
+
+ // Calculate the register compare value.
+ let frq = CNTFRQ_EL0.get() as u64;
+ let x = match frq.checked_mul(duration.as_nanos() as u64) {
+ None => {
+ warn!("Spin duration too long, skipping");
+ return;
+ }
+ Some(val) => val,
+ };
+ let tval = x / NS_PER_S;
+
+ // Check if it is within supported bounds.
+ let warn: Option<&str> = if tval == 0 {
+ Some("smaller")
+ // The upper 32 bits of CNTP_TVAL_EL0 are reserved.
+ } else if tval > u32::max_value().into() {
+ Some("bigger")
+ } else {
+ None
+ };
+
+ if let Some(w) = warn {
+ warn!(
+ "Spin duration {} than architecturally supported, skipping",
+ w
+ );
+ return;
+ }
+
+ // Set the compare value register.
+ CNTP_TVAL_EL0.set(tval);
+
+ // Kick off the counting. // Disable timer interrupt.
+ CNTP_CTL_EL0.modify(CNTP_CTL_EL0::ENABLE::SET + CNTP_CTL_EL0::IMASK::SET);
+
+ // ISTATUS will be '1' when cval ticks have passed. Busy-check it.
+ while !CNTP_CTL_EL0.matches_all(CNTP_CTL_EL0::ISTATUS::SET) {}
+
+ // Disable counting again.
+ CNTP_CTL_EL0.modify(CNTP_CTL_EL0::ENABLE::CLEAR);
+ }
+}
diff -uNr 07_uart_chainloader/src/bsp/device_driver/bcm/bcm2xxx_gpio.rs 08_timestamps/src/bsp/device_driver/bcm/bcm2xxx_gpio.rs
--- 07_uart_chainloader/src/bsp/device_driver/bcm/bcm2xxx_gpio.rs
+++ 08_timestamps/src/bsp/device_driver/bcm/bcm2xxx_gpio.rs
@@ -139,25 +139,19 @@
/// Disable pull-up/down on pins 14 and 15.
#[cfg(feature = "bsp_rpi3")]
fn disable_pud_14_15_bcm2837(&mut self) {
- use crate::cpu;
+ use crate::{time, time::interface::TimeManager};
+ use core::time::Duration;
- // Make an educated guess for a good delay value (Sequence described in the BCM2837
- // peripherals PDF).
- //
- // - According to Wikipedia, the fastest Pi3 clocks around 1.4 GHz.
- // - The Linux 2837 GPIO driver waits 1 µs between the steps.
- //
- // So lets try to be on the safe side and default to 2000 cycles, which would equal 1 µs
- // would the CPU be clocked at 2 GHz.
- const DELAY: usize = 2000;
+ // The Linux 2837 GPIO driver waits 1 µs between the steps.
+ const DELAY: Duration = Duration::from_micros(1);
self.registers.GPPUD.write(GPPUD::PUD::Off);
- cpu::spin_for_cycles(DELAY);
+ time::time_manager().spin_for(DELAY);
self.registers
.GPPUDCLK0
.write(GPPUDCLK0::PUDCLK15::AssertClock + GPPUDCLK0::PUDCLK14::AssertClock);
- cpu::spin_for_cycles(DELAY);
+ time::time_manager().spin_for(DELAY);
self.registers.GPPUD.write(GPPUD::PUD::Off);
self.registers.GPPUDCLK0.set(0);
diff -uNr 07_uart_chainloader/src/bsp/device_driver/bcm/bcm2xxx_pl011_uart.rs 08_timestamps/src/bsp/device_driver/bcm/bcm2xxx_pl011_uart.rs
--- 07_uart_chainloader/src/bsp/device_driver/bcm/bcm2xxx_pl011_uart.rs
+++ 08_timestamps/src/bsp/device_driver/bcm/bcm2xxx_pl011_uart.rs
@@ -287,11 +287,18 @@
cpu::nop();
}
+ // Read one character.
+ let mut ret = inner.registers.DR.get() as u8 as char;
+
+ // Convert carrige return to newline.
+ if ret == '\r' {
+ ret = '\n'
+ }
+
// Update statistics.
inner.chars_read += 1;
- // Read one character.
- inner.registers.DR.get() as u8 as char
+ ret
})
}
diff -uNr 07_uart_chainloader/src/bsp/raspberrypi/link.ld 08_timestamps/src/bsp/raspberrypi/link.ld
--- 07_uart_chainloader/src/bsp/raspberrypi/link.ld
+++ 08_timestamps/src/bsp/raspberrypi/link.ld
@@ -5,15 +5,12 @@
SECTIONS
{
- /* Set the link address to 32 MiB */
- . = 0x2000000;
+ /* Set current address to the value from which the RPi starts execution */
+ . = 0x80000;
- __binary_start = .;
.text :
{
- *(.text._start)
- KEEP(*(.text.runtime_init))
- *(.text*);
+ *(.text._start) *(.text*)
}
.rodata :
@@ -38,16 +35,5 @@
__bss_end_inclusive = . - 8;
}
- .got :
- {
- *(.got*)
- }
-
- /* Fill up to 8 byte, b/c relocating the binary is done in u64 chunks */
- . = ALIGN(8);
- __binary_end_inclusive = . - 8;
-
- __runtime_init_reloc = runtime_init;
-
/DISCARD/ : { *(.comment*) }
}
diff -uNr 07_uart_chainloader/src/bsp/raspberrypi/memory.rs 08_timestamps/src/bsp/raspberrypi/memory.rs
--- 07_uart_chainloader/src/bsp/raspberrypi/memory.rs
+++ 08_timestamps/src/bsp/raspberrypi/memory.rs
@@ -12,9 +12,6 @@
// Symbols from the linker script.
extern "Rust" {
- static __binary_start: UnsafeCell<u64>;
- static __binary_end_inclusive: UnsafeCell<u64>;
- static __runtime_init_reloc: UnsafeCell<u64>;
static __bss_start: UnsafeCell<u64>;
static __bss_end_inclusive: UnsafeCell<u64>;
}
@@ -26,12 +23,10 @@
/// The board's memory map.
#[rustfmt::skip]
pub(super) mod map {
- pub const BOOT_CORE_STACK_END: usize = 0x8_0000;
+ pub const BOOT_CORE_STACK_END: usize = 0x8_0000;
- pub const BOARD_DEFAULT_LOAD_ADDRESS: usize = 0x8_0000;
-
- pub const GPIO_OFFSET: usize = 0x0020_0000;
- pub const UART_OFFSET: usize = 0x0020_1000;
+ pub const GPIO_OFFSET: usize = 0x0020_0000;
+ pub const UART_OFFSET: usize = 0x0020_1000;
/// Physical devices.
#[cfg(feature = "bsp_rpi3")]
@@ -64,35 +59,13 @@
map::BOOT_CORE_STACK_END
}
-/// The address on which the Raspberry firmware loads every binary by default.
-#[inline(always)]
-pub fn board_default_load_addr() -> *const u64 {
- map::BOARD_DEFAULT_LOAD_ADDRESS as _
-}
-
-/// Return the inclusive range spanning the relocated kernel binary.
-///
-/// # Safety
-///
-/// - Values are provided by the linker script and must be trusted as-is.
-/// - The linker-provided addresses must be u64 aligned.
-pub fn relocated_binary_range_inclusive() -> RangeInclusive<*mut u64> {
- unsafe { RangeInclusive::new(__binary_start.get(), __binary_end_inclusive.get()) }
-}
-
-/// The relocated address of function `runtime_init()`.
-#[inline(always)]
-pub fn relocated_runtime_init_addr() -> *const u64 {
- unsafe { __runtime_init_reloc.get() as _ }
-}
-
-/// Return the inclusive range spanning the relocated .bss section.
+/// Return the inclusive range spanning the .bss section.
///
/// # Safety
///
/// - Values are provided by the linker script and must be trusted as-is.
/// - The linker-provided addresses must be u64 aligned.
-pub fn relocated_bss_range_inclusive() -> RangeInclusive<*mut u64> {
+pub fn bss_range_inclusive() -> RangeInclusive<*mut u64> {
let range;
unsafe {
range = RangeInclusive::new(__bss_start.get(), __bss_end_inclusive.get());
diff -uNr 07_uart_chainloader/src/main.rs 08_timestamps/src/main.rs
--- 07_uart_chainloader/src/main.rs
+++ 08_timestamps/src/main.rs
@@ -11,9 +11,11 @@
//!
//! - [`bsp::console::console()`] - Returns a reference to the kernel's [console interface].
//! - [`bsp::driver::driver_manager()`] - Returns a reference to the kernel's [driver interface].
+//! - [`time::time_manager()`] - Returns a reference to the kernel's [timer interface].
//!
//! [console interface]: ../libkernel/console/interface/index.html
//! [driver interface]: ../libkernel/driver/interface/trait.DriverManager.html
+//! [timer interface]: ../libkernel/time/interface/trait.TimeManager.html
//!
//! # Code organization and architecture
//!
@@ -100,9 +102,7 @@
//! - `crate::memory::*`
//! - `crate::bsp::memory::*`
-#![feature(asm)]
#![feature(const_fn_fn_ptr_basics)]
-#![feature(core_intrinsics)]
#![feature(format_args_nl)]
#![feature(naked_functions)]
#![feature(panic_info_message)]
@@ -111,8 +111,7 @@
#![no_std]
// `mod cpu` provides the `_start()` function, the first function to run. `_start()` then calls
-// `relocate::relocate_self()`. `relocate::relocate_self()` calls `runtime_init()`, which jumps to
-// `kernel_init()`.
+// `runtime_init()`, which jumps to `kernel_init()`.
mod bsp;
mod console;
@@ -121,9 +120,9 @@
mod memory;
mod panic_wait;
mod print;
-mod relocate;
mod runtime_init;
mod synchronization;
+mod time;
/// Early init code.
///
@@ -148,52 +147,31 @@
/// The main function running after the early init.
fn kernel_main() -> ! {
- use bsp::console::console;
- use console::interface::All;
+ use core::time::Duration;
+ use driver::interface::DriverManager;
+ use time::interface::TimeManager;
- println!(" __ __ _ _ _ _ ");
- println!("| \\/ (_)_ _ (_) | ___ __ _ __| |");
- println!("| |\\/| | | ' \\| | |__/ _ \\/ _` / _` |");
- println!("|_| |_|_|_||_|_|____\\___/\\__,_\\__,_|");
- println!();
- println!("{:^37}", bsp::board_name());
- println!();
- println!("[ML] Requesting binary");
- console().flush();
-
- // Clear the RX FIFOs, if any, of spurious received characters before starting with the loader
- // protocol.
- console().clear();
-
- // Notify `Minipush` to send the binary.
- for _ in 0..3 {
- console().write_char(3 as char);
- }
+ info!("Booting on: {}", bsp::board_name());
- // Read the binary's size.
- let mut size: u32 = u32::from(console().read_char() as u8);
- size |= u32::from(console().read_char() as u8) << 8;
- size |= u32::from(console().read_char() as u8) << 16;
- size |= u32::from(console().read_char() as u8) << 24;
-
- // Trust it's not too big.
- console().write_char('O');
- console().write_char('K');
-
- let kernel_addr: *mut u8 = bsp::memory::board_default_load_addr() as *mut u8;
- unsafe {
- // Read the kernel byte by byte.
- for i in 0..size {
- core::ptr::write_volatile(kernel_addr.offset(i as isize), console().read_char() as u8)
- }
+ info!(
+ "Architectural timer resolution: {} ns",
+ time::time_manager().resolution().as_nanos()
+ );
+
+ info!("Drivers loaded:");
+ for (i, driver) in bsp::driver::driver_manager()
+ .all_device_drivers()
+ .iter()
+ .enumerate()
+ {
+ info!(" {}. {}", i + 1, driver.compatible());
}
- println!("[ML] Loaded! Executing the payload now\n");
- console().flush();
+ // Test a failing timer case.
+ time::time_manager().spin_for(Duration::from_nanos(1));
- // Use black magic to get a function pointer.
- let kernel: fn() -> ! = unsafe { core::mem::transmute(kernel_addr) };
-
- // Jump to loaded kernel!
- kernel()
+ loop {
+ info!("Spinning for 1 second");
+ time::time_manager().spin_for(Duration::from_secs(1));
+ }
}
diff -uNr 07_uart_chainloader/src/print.rs 08_timestamps/src/print.rs
--- 07_uart_chainloader/src/print.rs
+++ 08_timestamps/src/print.rs
@@ -36,3 +36,71 @@
$crate::print::_print(format_args_nl!($($arg)*));
})
}
+
+/// Prints an info, with a newline.
+#[macro_export]
+macro_rules! info {
+ ($string:expr) => ({
+ #[allow(unused_imports)]
+ use crate::time::interface::TimeManager;
+
+ let timestamp = $crate::time::time_manager().uptime();
+ let timestamp_subsec_us = timestamp.subsec_micros();
+
+ $crate::print::_print(format_args_nl!(
+ concat!("[ {:>3}.{:03}{:03}] ", $string),
+ timestamp.as_secs(),
+ timestamp_subsec_us / 1_000,
+ timestamp_subsec_us modulo 1_000
+ ));
+ });
+ ($format_string:expr, $($arg:tt)*) => ({
+ #[allow(unused_imports)]
+ use crate::time::interface::TimeManager;
+
+ let timestamp = $crate::time::time_manager().uptime();
+ let timestamp_subsec_us = timestamp.subsec_micros();
+
+ $crate::print::_print(format_args_nl!(
+ concat!("[ {:>3}.{:03}{:03}] ", $format_string),
+ timestamp.as_secs(),
+ timestamp_subsec_us / 1_000,
+ timestamp_subsec_us modulo 1_000,
+ $($arg)*
+ ));
+ })
+}
+
+/// Prints a warning, with a newline.
+#[macro_export]
+macro_rules! warn {
+ ($string:expr) => ({
+ #[allow(unused_imports)]
+ use crate::time::interface::TimeManager;
+
+ let timestamp = $crate::time::time_manager().uptime();
+ let timestamp_subsec_us = timestamp.subsec_micros();
+
+ $crate::print::_print(format_args_nl!(
+ concat!("[W {:>3}.{:03}{:03}] ", $string),
+ timestamp.as_secs(),
+ timestamp_subsec_us / 1_000,
+ timestamp_subsec_us modulo 1_000
+ ));
+ });
+ ($format_string:expr, $($arg:tt)*) => ({
+ #[allow(unused_imports)]
+ use crate::time::interface::TimeManager;
+
+ let timestamp = $crate::time::time_manager().uptime();
+ let timestamp_subsec_us = timestamp.subsec_micros();
+
+ $crate::print::_print(format_args_nl!(
+ concat!("[W {:>3}.{:03}{:03}] ", $format_string),
+ timestamp.as_secs(),
+ timestamp_subsec_us / 1_000,
+ timestamp_subsec_us modulo 1_000,
+ $($arg)*
+ ));
+ })
+}
diff -uNr 07_uart_chainloader/src/relocate.rs 08_timestamps/src/relocate.rs
--- 07_uart_chainloader/src/relocate.rs
+++ 08_timestamps/src/relocate.rs
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: MIT OR Apache-2.0
-//
-// Copyright (c) 2018-2020 Andre Richter <andre.o.richter@gmail.com>
-
-//! Relocation code.
-
-use crate::{bsp, cpu};
-
-//--------------------------------------------------------------------------------------------------
-// Public Code
-//--------------------------------------------------------------------------------------------------
-
-/// Relocates the own binary from `bsp::memory::board_default_load_addr()` to the `__binary_start`
-/// address from the linker script.
-///
-/// # Safety
-///
-/// - Only a single core must be active and running this function.
-/// - Function must not use the `bss` section.
-#[inline(never)]
-pub unsafe fn relocate_self() -> ! {
- let range = bsp::memory::relocated_binary_range_inclusive();
- let mut relocated_binary_start_addr = *range.start();
- let relocated_binary_end_addr_inclusive = *range.end();
-
- // The address of where the previous firmware loaded us.
- let mut current_binary_start_addr = bsp::memory::board_default_load_addr();
-
- // Copy the whole binary.
- while relocated_binary_start_addr <= relocated_binary_end_addr_inclusive {
- core::ptr::write_volatile(
- relocated_binary_start_addr,
- core::ptr::read_volatile(current_binary_start_addr),
- );
- relocated_binary_start_addr = relocated_binary_start_addr.offset(1);
- current_binary_start_addr = current_binary_start_addr.offset(1);
- }
-
- // The following function calls form a hack to achieve an "absolute jump" to
- // `runtime_init::runtime_init()` by forcing an indirection through the global offset table
- // (GOT), so that execution continues from the relocated binary.
- //
- // Without this, the address of `runtime_init()` would be calculated as a relative offset from
- // the current program counter, since we are compiling as `position independent code`. This
- // would cause us to keep executing from the address to which the firmware loaded us, instead of
- // the relocated position.
- //
- // There likely is a more elegant way to do this.
- let relocated_runtime_init_addr = bsp::memory::relocated_runtime_init_addr() as usize;
- cpu::branch_to_raw_addr(relocated_runtime_init_addr)
-}
diff -uNr 07_uart_chainloader/src/runtime_init.rs 08_timestamps/src/runtime_init.rs
--- 07_uart_chainloader/src/runtime_init.rs
+++ 08_timestamps/src/runtime_init.rs
@@ -17,7 +17,7 @@
/// - Must only be called pre `kernel_init()`.
#[inline(always)]
unsafe fn zero_bss() {
- memory::zero_volatile(bsp::memory::relocated_bss_range_inclusive());
+ memory::zero_volatile(bsp::memory::bss_range_inclusive());
}
//--------------------------------------------------------------------------------------------------
@@ -30,7 +30,6 @@
/// # Safety
///
/// - Only a single core must be active and running this function.
-#[no_mangle]
pub unsafe fn runtime_init() -> ! {
zero_bss();
diff -uNr 07_uart_chainloader/src/time.rs 08_timestamps/src/time.rs
--- 07_uart_chainloader/src/time.rs
+++ 08_timestamps/src/time.rs
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: MIT OR Apache-2.0
+//
+// Copyright (c) 2020 Andre Richter <andre.o.richter@gmail.com>
+
+//! Timer primitives.
+
+#[cfg(target_arch = "aarch64")]
+#[path = "_arch/aarch64/time.rs"]
+mod arch_time;
+pub use arch_time::*;
+
+//--------------------------------------------------------------------------------------------------
+// Public Definitions
+//--------------------------------------------------------------------------------------------------
+
+/// Timekeeping interfaces.
+pub mod interface {
+ use core::time::Duration;
+
+ /// Time management functions.
+ ///
+ /// The `BSP` is supposed to supply one global instance.
+ pub trait TimeManager {
+ /// The timer's resolution.
+ fn resolution(&self) -> Duration;
+
+ /// The uptime since power-on of the device.
+ ///
+ /// This includes time consumed by firmware and bootloaders.
+ fn uptime(&self) -> Duration;
+
+ /// Spin for a given duration.
+ fn spin_for(&self, duration: Duration);
+ }
+}