# Tutorial 11 - Exceptions Part 1: Groundwork ## tl;dr - We lay the groundwork for all the architectural `CPU exceptions`. - For now, only print an elaborate system state through a `panic!` call, and halt execution - This will help finding bugs during development and runtime. - For demo purposes, MMU `page faults` are used to demonstrate (i) returning from an exception and (ii) the default `panic!` behavior. ## Table of Contents - [Introduction](#introduction) - [Exception Types](#exception-types) - [Exception entry](#exception-entry) * [Exception Vectors](#exception-vectors) - [Handler Code and Offsets](#handler-code-and-offsets) - [Rust and Assembly Implementation](#rust-and-assembly-implementation) * [Context Save and Restore](#context-save-and-restore) * [Exception Vector Table](#exception-vector-table) * [Implementing handlers](#implementing-handlers) - [Causing an Exception - Testing the Code](#causing-an-exception---testing-the-code) - [Test it](#test-it) - [Diff to previous](#diff-to-previous) ## Introduction Now that we are executing in `EL1`, and have activated the `MMU`, time is due for implementing `CPU exceptions`. For now, we only set up a scaffold with very basic functionality that will help us to find bugs along the way. A follow-up `Interrupt` tutorial later will continue the work we start here. Please note that this tutorial is specific to the `AArch64` architecture. It does not contain any generic exception handling code yet. ## Exception Types In `AArch64`, it is differentiated between four types of exceptions. These are: - Synchronous - For example, a `data abort` (e.g. `page fault`) or a `system call`. They happen in direct consequence of executing a certain CPU instruction, hence _synchronously_. - Interrupt Request (`IRQ`) - For example, an external device, like a timer, is asserting a physical interrupt line. IRQs happen _asynchronously_. - Fast Interrupt Request (`FIQ`) - These are basically interrupts that take priority over normal IRQs and have some more traits that make them suitable to implement super-fast processing. However, this is out of scope for this tutorial. For the sake of keeping these tutorials compact and concise, we will more or less ignore FIQs and only implement a dummy handler that would halt the CPU core. - System Error (`SError`) - Like IRQs, SErrors happen asynchronously and are technically more or less the same. They are intended to signal rather fatal errors in the system, e.g. if a transaction times out on the `SoC` interconnect. They are very implementation specific and it is up to the SoC vendor to decide which events are delivered as SErrors instead of normal IRQs. ## Exception entry I recommend to read pages 1874-1876 of the [ARMv8 Architecture Reference Manual][ARMv8_Manual] to understand the mechanisms of taking an exception. Here's an excerpt of important features for this tutorial: - Exception entry moves the processor to the same or a higher `Exception Level`, but never to a lower `EL`. - The program status is saved in the `SPSR_ELx` register at the target `EL`. - The preferred return address is saved in the `ELR_ELx` register. - "Preferred" here means that `ELR_ELx` may hold the instruction address of the instructions that caused the exception (`synchronous case`) or the first instruction that did not complete due to an `asynchronous` exception. Details in Chapter D1.10.1 of the [ARMv8 Architecture Reference Manual][ARMv8_Manual]. - All kinds of exceptions are turned off upon taking an exception, so that by default, exception handlers can not get interrupted themselves. - Taking an exception will select the dedicated stack pointer of the target `EL`. - For example, if an exception in `EL0` is taken, the Stack Pointer Select register `SPSel` will switch from `0` to `1`, meaning that `SP_EL1` will be used by the exception vector code unless you explicitly change it back to `SP_EL0`. ### Exception Vectors `AArch64` has a total of `16` exception vectors. There is one for each of the four kinds that were introduced already, and additionally, it is taken into account _where_ the exception was taken from and what the circumstances were. Here is a copy of the decision table as shown in Chapter D1.10.2 of the [ARMv8 Architecture Reference Manual][ARMv8_Manual]: [ARMv8_Manual]: https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile
Exception taken from Offset for exception type
Synchronous IRQ or vIRQ FIQ or vFIQ SError or vSError
Current Exception level with SP_EL0. 0x000 0x080 0x100 0x180
Current Exception level with SP_ELx, x>0. 0x200 0x280 0x300 0x380
Lower Exception level, where the implemented level immediately lower than the target level is using AArch64. 0x400 0x480 0x500 0x580
Lower Exception level, where the implemented level immediately lower than the target level is using AArch32. 0x600 0x680 0x700 0x780
Since our kernel runs in `EL1`, using `SP_EL1`, if we'd cause a synchronous exception, the exception vector at offset `0x200` would be executed. But what does that even mean? ## Handler Code and Offsets In many architectures, Operating Systems register their exception handlers (aka vectors) by compiling an architecturally defined data structure that stores function pointers to the different handlers. This can be as simple as an ordinary array of function pointers. The `base address` of this data structure is then stored into a special purpose register so that the CPU can branch to the respective handler function upon taking an exception. The classic `x86_64` architecture follows this principle, for example. In `AArch64`, it is a bit different. Here, we have the special purpose register as well, called `VBAR_EL1`: Vector Base Address Register. However, it does not store the base address of an array of function pointers, but the base address of a **memory location that contains code** for the 16 handlers, one handler back-to-back after the other. Each handler can take a maximum space of `0x80` bytes, aka `128` bytes. That's why the table above shows `offsets`: To indicate at which offset a certain handler starts. Of course, you are not obliged to cram all your handler code into only 128 bytes. You are free to branch off to any other functions at any time. Actually, that is needed in most cases anyways, because the context-saving code alone would take up most of the available space (you'll learn what context saving is shortly). Additionally, there is a requirement that the `Vector Base Address` is aligned to `0x800` aka `2048` bytes. ## Rust and Assembly Implementation The implementation uses a mix of `Rust` and `Assembly` code. ### Context Save and Restore Exception vectors, just like any other code, use a bunch of commonly shared processor resources. Most of all, the set of `General Purpose Registers` (GPRs) that each core in `AArch64` provides (`x0`-`x30`). In order to not taint these registers when executing exception vector code, it is general practice to save these shared resources in memory (the stack, to be precise) as the very first action. This is commonly described as *saving the context*. Exception vector code can then use the shared resources in its own code without bothering, and as a last action before returning from exception handling code, restore the context, so that the processor can continue where it left off before taking the exception. Context save and restore is one of the few places in system software where there is no way around some hand-crafted assembly. Introducing `exception.s`: ```asm /// Call the function provided by parameter `\handler` after saving the exception context. Provide /// the context as the first parameter to '\handler'. .macro CALL_WITH_CONTEXT handler __vector_\handler: // Make room on the stack for the exception context. sub sp, sp, #16 * 17 // Store all general purpose registers on the stack. stp x0, x1, [sp, #16 * 0] stp x2, x3, [sp, #16 * 1] stp x4, x5, [sp, #16 * 2] stp x6, x7, [sp, #16 * 3] stp x8, x9, [sp, #16 * 4] stp x10, x11, [sp, #16 * 5] stp x12, x13, [sp, #16 * 6] stp x14, x15, [sp, #16 * 7] stp x16, x17, [sp, #16 * 8] stp x18, x19, [sp, #16 * 9] stp x20, x21, [sp, #16 * 10] stp x22, x23, [sp, #16 * 11] stp x24, x25, [sp, #16 * 12] stp x26, x27, [sp, #16 * 13] stp x28, x29, [sp, #16 * 14] // Add the exception link register (ELR_EL1), saved program status (SPSR_EL1) and exception // syndrome register (ESR_EL1). mrs x1, ELR_EL1 mrs x2, SPSR_EL1 mrs x3, ESR_EL1 stp lr, x1, [sp, #16 * 15] stp x2, x3, [sp, #16 * 16] // x0 is the first argument for the function called through `\handler`. mov x0, sp // Call `\handler`. bl \handler // After returning from exception handling code, replay the saved context and return via // `eret`. b __exception_restore_context .size __vector_\handler, . - __vector_\handler .type __vector_\handler, function .endm ``` First, a macro for saving the context is defined. It eventually jumps to follow-up handler code, and finally restores the context. In advance, we reserve space on the stack for the context. That is, the 30 `GPRs`, the `link register`, the `exception link register` (holding the preferred return address), the `saved program status` and the `exception syndrome register`. Afterwards, we store those registers, save the current stack address in `x0` and branch off to follow-up handler-code, whose function name is supplied as an argument to the macro (`\handler`). The handler code will be written in Rust, but use the platform's `C` ABI. This way, we can define a function signature that has a pointer to the context-data on the stack as its first argument, and know that this argument is expected to be in the `x0` register. We need to use the `C` ABI here because `Rust` has no stable convention ([yet](https://github.com/rust-lang/rfcs/issues/600)). ### Exception Vector Table Next, we craft the exception vector table: ```asm // Align by 2^11 bytes, as demanded by ARMv8-A. Same as ALIGN(2048) in an ld script. .align 11 // Export a symbol for the Rust code to use. __exception_vector_start: // Current exception level with SP_EL0. // // .org sets the offset relative to section start. // // # Safety // // - It must be ensured that `CALL_WITH_CONTEXT` <= 0x80 bytes. .org 0x000 CALL_WITH_CONTEXT current_el0_synchronous .org 0x080 CALL_WITH_CONTEXT current_el0_irq .org 0x100 FIQ_SUSPEND .org 0x180 CALL_WITH_CONTEXT current_el0_serror // Current exception level with SP_ELx, x > 0. .org 0x200 CALL_WITH_CONTEXT current_elx_synchronous .org 0x280 CALL_WITH_CONTEXT current_elx_irq .org 0x300 FIQ_SUSPEND .org 0x380 CALL_WITH_CONTEXT current_elx_serror [...] ``` Note how each vector starts at the required offset from the section start using the `.org` directive. Each macro call introduces an explicit handler function name, which is implemented in `Rust` in `exception.rs`. ### Implementing handlers The file `exception.rs` first defines a `struct` of the exception context that is stored on the stack by the assembly code: ```rust /// The exception context as it is stored on the stack on exception entry. #[repr(C)] struct ExceptionContext { /// General Purpose Registers. gpr: [u64; 30], /// The link register, aka x30. lr: u64, /// Exception link register. The program counter at the time the exception happened. elr_el1: u64, /// Saved program status. spsr_el1: SpsrEL1, // Exception syndrome register. esr_el1: EsrEL1, } ``` The handlers take a `struct ExceptionContext` argument. Since we do not plan to implement handlers for each exception yet, a default handler is provided: ```rust /// Prints verbose information about the exception and then panics. fn default_exception_handler(exc: &ExceptionContext) { panic!( "CPU Exception!\n\n\ {}", exc ); } ``` The actual handlers referenced from the assembly can now branch to it for the time being, e.g.: ```rust #[no_mangle] extern "C" fn current_elx_irq(e: &mut ExceptionContext) { default_exception_handler(e); } ``` ## Causing an Exception - Testing the Code We want to see two cases in action: 1. How taking, handling and returning from an exception works. 2. How the `panic!` print for unhandled exceptions looks like. So after setting up exceptions in `main.rs` by calling ```rust exception::handling_init(); ``` we cause a data abort exception by reading from memory address `8 GiB`: ```rust // Cause an exception by accessing a virtual address for which no translation was set up. This // code accesses the address 8 GiB, which is outside the mapped address space. // // For demo purposes, the exception handler will catch the faulting 8 GiB address and allow // execution to continue. info!(""); info!("Trying to read from address 8 GiB..."); let mut big_addr: u64 = 8 * 1024 * 1024 * 1024; unsafe { core::ptr::read_volatile(big_addr as *mut u64) }; ``` This triggers our exception code, because we try to read from a virtual address for which no mapping has been installed. Remember, we only mapped up to `4 GiB` of address space in the previous tutorial. To survive this exception, the respective handler has a special demo case: ```rust #[no_mangle] extern "C" fn current_elx_synchronous(e: &mut ExceptionContext) { if e.fault_address_valid() { let far_el1 = FAR_EL1.get(); // This catches the demo case for this tutorial. If the fault address happens to be 8 GiB, // advance the exception link register for one instruction, so that execution can continue. if far_el1 == 8 * 1024 * 1024 * 1024 { e.elr_el1 += 4; return; } } default_exception_handler(e); } ``` It checks if the faulting address equals `8 GiB`, and if so, advances the copy of the `ELR` by 4, which makes it point to the next instruction after the instruction that caused the exception. When this handler returns, execution continues in the assembly macro we introduced before. The macro has only one more line left: `b __exception_restore_context`, which jumps to an assembly function that plays back our saved context before finally executing `eret` to return from the exception. This will kick us back into `main.rs`. But we also want to see the `panic!` print. Therefore, a second read is done, this time from address `9 GiB`. A case which the handler will not catch, eventually triggering the `panic!` call from the default handler. ## Test it ```console $ make chainboot [...] Minipush 1.0 [MP] ⏳ Waiting for /dev/ttyUSB0 [MP] ✅ Serial connected [MP] 🔌 Please power the target now __ __ _ _ _ _ | \/ (_)_ _ (_) | ___ __ _ __| | | |\/| | | ' \| | |__/ _ \/ _` / _` | |_| |_|_|_||_|_|____\___/\__,_\__,_| Raspberry Pi 3 [ML] Requesting binary [MP] ⏩ Pushing 64 KiB =========================================🦀 100% 0 KiB/s Time: 00:00:00 [ML] Loaded! Executing the payload now [ 0.798323] mingo version 0.11.0 [ 0.798530] Booting on: Raspberry Pi 3 [ 0.798985] MMU online. Special regions: [ 0.799462] 0x00080000 - 0x0008ffff | 64 KiB | C RO PX | Kernel code and RO data [ 0.800480] 0x3f000000 - 0x4000ffff | 17 MiB | Dev RW PXN | Device MMIO [ 0.801369] Current privilege level: EL1 [ 0.801845] Exception handling state: [ 0.802290] Debug: Masked [ 0.802680] SError: Masked [ 0.803069] IRQ: Masked [ 0.803459] FIQ: Masked [ 0.803849] Architectural timer resolution: 52 ns [ 0.804423] Drivers loaded: [ 0.804759] 1. BCM PL011 UART [ 0.805182] 2. BCM GPIO [ 0.805539] Timer test, spinning for 1 second [ 1.806070] [ 1.806074] Trying to read from address 8 GiB... [ 1.806624] ************************************************ [ 1.807316] Whoa! We recovered from a synchronous exception! [ 1.808009] ************************************************ [ 1.808703] [ 1.808876] Let's try again [ 1.809212] Trying to read from address 9 GiB... [ 1.809776] Kernel panic! Panic location: File 'src/_arch/aarch64/exception.rs', line 58, column 5 CPU Exception! ESR_EL1: 0x96000004 Exception Class (EC) : 0x25 - Data Abort, current EL Instr Specific Syndrome (ISS): 0x4 FAR_EL1: 0x0000000240000000 SPSR_EL1: 0x600003c5 Flags: Negative (N): Not set Zero (Z): Set Carry (C): Set Overflow (V): Not set Exception handling state: Debug (D): Masked SError (A): Masked IRQ (I): Masked FIQ (F): Masked Illegal Execution State (IL): Not set ELR_EL1: 0x00000000000845f8 General purpose register: x0 : 0x0000000000000000 x1 : 0x0000000000086187 x2 : 0x0000000000000027 x3 : 0x0000000000081280 x4 : 0x0000000000000006 x5 : 0x1e27329c00000000 x6 : 0x0000000000000000 x7 : 0xd3d18908028f0243 x8 : 0x0000000240000000 x9 : 0x0000000000086187 x10: 0x0000000000000443 x11: 0x000000003f201000 x12: 0x0000000000000019 x13: 0x00000000ffffd8f0 x14: 0x000000000000147b x15: 0x00000000ffffff9c x16: 0x000000000007fd38 x17: 0x0000000005f5e0ff x18: 0x00000000000c58fc x19: 0x0000000000090008 x20: 0x0000000000085fc0 x21: 0x000000003b9aca00 x22: 0x0000000000082238 x23: 0x00000000000813d4 x24: 0x0000000010624dd3 x25: 0xffffffffc4653600 x26: 0x0000000000086988 x27: 0x0000000000086080 x28: 0x0000000000085f10 x29: 0x0000000000085c00 lr : 0x00000000000845ec ``` ## Diff to previous ```diff diff -uNr 10_virtual_mem_part1_identity_mapping/Cargo.toml 11_exceptions_part1_groundwork/Cargo.toml --- 10_virtual_mem_part1_identity_mapping/Cargo.toml +++ 11_exceptions_part1_groundwork/Cargo.toml @@ -1,6 +1,6 @@ [package] name = "mingo" -version = "0.10.0" +version = "0.11.0" authors = ["Andre Richter "] edition = "2021" diff -uNr 10_virtual_mem_part1_identity_mapping/src/_arch/aarch64/exception.rs 11_exceptions_part1_groundwork/src/_arch/aarch64/exception.rs --- 10_virtual_mem_part1_identity_mapping/src/_arch/aarch64/exception.rs +++ 11_exceptions_part1_groundwork/src/_arch/aarch64/exception.rs @@ -11,8 +11,263 @@ //! //! crate::exception::arch_exception -use cortex_a::registers::*; -use tock_registers::interfaces::Readable; +use core::{arch::global_asm, cell::UnsafeCell, fmt}; +use cortex_a::{asm::barrier, registers::*}; +use tock_registers::{ + interfaces::{Readable, Writeable}, + registers::InMemoryRegister, +}; + +// Assembly counterpart to this file. +global_asm!(include_str!("exception.s")); + +//-------------------------------------------------------------------------------------------------- +// Private Definitions +//-------------------------------------------------------------------------------------------------- + +/// Wrapper structs for memory copies of registers. +#[repr(transparent)] +struct SpsrEL1(InMemoryRegister); +struct EsrEL1(InMemoryRegister); + +/// The exception context as it is stored on the stack on exception entry. +#[repr(C)] +struct ExceptionContext { + /// General Purpose Registers. + gpr: [u64; 30], + + /// The link register, aka x30. + lr: u64, + + /// Exception link register. The program counter at the time the exception happened. + elr_el1: u64, + + /// Saved program status. + spsr_el1: SpsrEL1, + + /// Exception syndrome register. + esr_el1: EsrEL1, +} + +//-------------------------------------------------------------------------------------------------- +// Private Code +//-------------------------------------------------------------------------------------------------- + +/// Prints verbose information about the exception and then panics. +fn default_exception_handler(exc: &ExceptionContext) { + panic!( + "CPU Exception!\n\n\ + {}", + exc + ); +} + +//------------------------------------------------------------------------------ +// Current, EL0 +//------------------------------------------------------------------------------ + +#[no_mangle] +extern "C" fn current_el0_synchronous(_e: &mut ExceptionContext) { + panic!("Should not be here. Use of SP_EL0 in EL1 is not supported.") +} + +#[no_mangle] +extern "C" fn current_el0_irq(_e: &mut ExceptionContext) { + panic!("Should not be here. Use of SP_EL0 in EL1 is not supported.") +} + +#[no_mangle] +extern "C" fn current_el0_serror(_e: &mut ExceptionContext) { + panic!("Should not be here. Use of SP_EL0 in EL1 is not supported.") +} + +//------------------------------------------------------------------------------ +// Current, ELx +//------------------------------------------------------------------------------ + +#[no_mangle] +extern "C" fn current_elx_synchronous(e: &mut ExceptionContext) { + if e.fault_address_valid() { + let far_el1 = FAR_EL1.get(); + + // This catches the demo case for this tutorial. If the fault address happens to be 8 GiB, + // advance the exception link register for one instruction, so that execution can continue. + if far_el1 == 8 * 1024 * 1024 * 1024 { + e.elr_el1 += 4; + + return; + } + } + + default_exception_handler(e); +} + +#[no_mangle] +extern "C" fn current_elx_irq(e: &mut ExceptionContext) { + default_exception_handler(e); +} + +#[no_mangle] +extern "C" fn current_elx_serror(e: &mut ExceptionContext) { + default_exception_handler(e); +} + +//------------------------------------------------------------------------------ +// Lower, AArch64 +//------------------------------------------------------------------------------ + +#[no_mangle] +extern "C" fn lower_aarch64_synchronous(e: &mut ExceptionContext) { + default_exception_handler(e); +} + +#[no_mangle] +extern "C" fn lower_aarch64_irq(e: &mut ExceptionContext) { + default_exception_handler(e); +} + +#[no_mangle] +extern "C" fn lower_aarch64_serror(e: &mut ExceptionContext) { + default_exception_handler(e); +} + +//------------------------------------------------------------------------------ +// Lower, AArch32 +//------------------------------------------------------------------------------ + +#[no_mangle] +extern "C" fn lower_aarch32_synchronous(e: &mut ExceptionContext) { + default_exception_handler(e); +} + +#[no_mangle] +extern "C" fn lower_aarch32_irq(e: &mut ExceptionContext) { + default_exception_handler(e); +} + +#[no_mangle] +extern "C" fn lower_aarch32_serror(e: &mut ExceptionContext) { + default_exception_handler(e); +} + +//------------------------------------------------------------------------------ +// Misc +//------------------------------------------------------------------------------ + +/// Human readable SPSR_EL1. +#[rustfmt::skip] +impl fmt::Display for SpsrEL1 { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + // Raw value. + writeln!(f, "SPSR_EL1: {:#010x}", self.0.get())?; + + let to_flag_str = |x| -> _ { + if x { "Set" } else { "Not set" } + }; + + writeln!(f, " Flags:")?; + writeln!(f, " Negative (N): {}", to_flag_str(self.0.is_set(SPSR_EL1::N)))?; + writeln!(f, " Zero (Z): {}", to_flag_str(self.0.is_set(SPSR_EL1::Z)))?; + writeln!(f, " Carry (C): {}", to_flag_str(self.0.is_set(SPSR_EL1::C)))?; + writeln!(f, " Overflow (V): {}", to_flag_str(self.0.is_set(SPSR_EL1::V)))?; + + let to_mask_str = |x| -> _ { + if x { "Masked" } else { "Unmasked" } + }; + + writeln!(f, " Exception handling state:")?; + writeln!(f, " Debug (D): {}", to_mask_str(self.0.is_set(SPSR_EL1::D)))?; + writeln!(f, " SError (A): {}", to_mask_str(self.0.is_set(SPSR_EL1::A)))?; + writeln!(f, " IRQ (I): {}", to_mask_str(self.0.is_set(SPSR_EL1::I)))?; + writeln!(f, " FIQ (F): {}", to_mask_str(self.0.is_set(SPSR_EL1::F)))?; + + write!(f, " Illegal Execution State (IL): {}", + to_flag_str(self.0.is_set(SPSR_EL1::IL)) + ) + } +} + +impl EsrEL1 { + #[inline(always)] + fn exception_class(&self) -> Option { + self.0.read_as_enum(ESR_EL1::EC) + } +} + +/// Human readable ESR_EL1. +#[rustfmt::skip] +impl fmt::Display for EsrEL1 { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + // Raw print of whole register. + writeln!(f, "ESR_EL1: {:#010x}", self.0.get())?; + + // Raw print of exception class. + write!(f, " Exception Class (EC) : {:#x}", self.0.read(ESR_EL1::EC))?; + + // Exception class. + let ec_translation = match self.exception_class() { + Some(ESR_EL1::EC::Value::DataAbortCurrentEL) => "Data Abort, current EL", + _ => "N/A", + }; + writeln!(f, " - {}", ec_translation)?; + + // Raw print of instruction specific syndrome. + write!(f, " Instr Specific Syndrome (ISS): {:#x}", self.0.read(ESR_EL1::ISS)) + } +} + +impl ExceptionContext { + #[inline(always)] + fn exception_class(&self) -> Option { + self.esr_el1.exception_class() + } + + #[inline(always)] + fn fault_address_valid(&self) -> bool { + use ESR_EL1::EC::Value::*; + + match self.exception_class() { + None => false, + Some(ec) => matches!( + ec, + InstrAbortLowerEL + | InstrAbortCurrentEL + | PCAlignmentFault + | DataAbortLowerEL + | DataAbortCurrentEL + | WatchpointLowerEL + | WatchpointCurrentEL + ), + } + } +} + +/// Human readable print of the exception context. +impl fmt::Display for ExceptionContext { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + writeln!(f, "{}", self.esr_el1)?; + + if self.fault_address_valid() { + writeln!(f, "FAR_EL1: {:#018x}", FAR_EL1.get() as usize)?; + } + + writeln!(f, "{}", self.spsr_el1)?; + writeln!(f, "ELR_EL1: {:#018x}", self.elr_el1)?; + writeln!(f)?; + writeln!(f, "General purpose register:")?; + + #[rustfmt::skip] + let alternating = |x| -> _ { + if x modulo 2 == 0 { " " } else { "\n" } + }; + + // Print two registers per line. + for (i, reg) in self.gpr.iter().enumerate() { + write!(f, " x{: <2}: {: >#018x}{}", i, reg, alternating(i))?; + } + write!(f, " lr : {:#018x}", self.lr) + } +} //-------------------------------------------------------------------------------------------------- // Public Code @@ -29,3 +284,23 @@ _ => (PrivilegeLevel::Unknown, "Unknown"), } } + +/// Init exception handling by setting the exception vector base address register. +/// +/// # Safety +/// +/// - Changes the HW state of the executing core. +/// - The vector table and the symbol `__exception_vector_table_start` from the linker script must +/// adhere to the alignment and size constraints demanded by the ARMv8-A Architecture Reference +/// Manual. +pub unsafe fn handling_init() { + // Provided by exception.S. + extern "Rust" { + static __exception_vector_start: UnsafeCell<()>; + } + + VBAR_EL1.set(__exception_vector_start.get() as u64); + + // Force VBAR update to complete before next instruction. + barrier::isb(barrier::SY); +} diff -uNr 10_virtual_mem_part1_identity_mapping/src/_arch/aarch64/exception.s 11_exceptions_part1_groundwork/src/_arch/aarch64/exception.s --- 10_virtual_mem_part1_identity_mapping/src/_arch/aarch64/exception.s +++ 11_exceptions_part1_groundwork/src/_arch/aarch64/exception.s @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: MIT OR Apache-2.0 +// +// Copyright (c) 2018-2022 Andre Richter + +//-------------------------------------------------------------------------------------------------- +// Definitions +//-------------------------------------------------------------------------------------------------- + +/// Call the function provided by parameter `\handler` after saving the exception context. Provide +/// the context as the first parameter to '\handler'. +.macro CALL_WITH_CONTEXT handler +__vector_\handler: + // Make room on the stack for the exception context. + sub sp, sp, #16 * 17 + + // Store all general purpose registers on the stack. + stp x0, x1, [sp, #16 * 0] + stp x2, x3, [sp, #16 * 1] + stp x4, x5, [sp, #16 * 2] + stp x6, x7, [sp, #16 * 3] + stp x8, x9, [sp, #16 * 4] + stp x10, x11, [sp, #16 * 5] + stp x12, x13, [sp, #16 * 6] + stp x14, x15, [sp, #16 * 7] + stp x16, x17, [sp, #16 * 8] + stp x18, x19, [sp, #16 * 9] + stp x20, x21, [sp, #16 * 10] + stp x22, x23, [sp, #16 * 11] + stp x24, x25, [sp, #16 * 12] + stp x26, x27, [sp, #16 * 13] + stp x28, x29, [sp, #16 * 14] + + // Add the exception link register (ELR_EL1), saved program status (SPSR_EL1) and exception + // syndrome register (ESR_EL1). + mrs x1, ELR_EL1 + mrs x2, SPSR_EL1 + mrs x3, ESR_EL1 + + stp lr, x1, [sp, #16 * 15] + stp x2, x3, [sp, #16 * 16] + + // x0 is the first argument for the function called through `\handler`. + mov x0, sp + + // Call `\handler`. + bl \handler + + // After returning from exception handling code, replay the saved context and return via + // `eret`. + b __exception_restore_context + +.size __vector_\handler, . - __vector_\handler +.type __vector_\handler, function +.endm + +.macro FIQ_SUSPEND +1: wfe + b 1b +.endm + +//-------------------------------------------------------------------------------------------------- +// Private Code +//-------------------------------------------------------------------------------------------------- +.section .text + +//------------------------------------------------------------------------------ +// The exception vector table. +//------------------------------------------------------------------------------ + +// Align by 2^11 bytes, as demanded by ARMv8-A. Same as ALIGN(2048) in an ld script. +.align 11 + +// Export a symbol for the Rust code to use. +__exception_vector_start: + +// Current exception level with SP_EL0. +// +// .org sets the offset relative to section start. +// +// # Safety +// +// - It must be ensured that `CALL_WITH_CONTEXT` <= 0x80 bytes. +.org 0x000 + CALL_WITH_CONTEXT current_el0_synchronous +.org 0x080 + CALL_WITH_CONTEXT current_el0_irq +.org 0x100 + FIQ_SUSPEND +.org 0x180 + CALL_WITH_CONTEXT current_el0_serror + +// Current exception level with SP_ELx, x > 0. +.org 0x200 + CALL_WITH_CONTEXT current_elx_synchronous +.org 0x280 + CALL_WITH_CONTEXT current_elx_irq +.org 0x300 + FIQ_SUSPEND +.org 0x380 + CALL_WITH_CONTEXT current_elx_serror + +// Lower exception level, AArch64 +.org 0x400 + CALL_WITH_CONTEXT lower_aarch64_synchronous +.org 0x480 + CALL_WITH_CONTEXT lower_aarch64_irq +.org 0x500 + FIQ_SUSPEND +.org 0x580 + CALL_WITH_CONTEXT lower_aarch64_serror + +// Lower exception level, AArch32 +.org 0x600 + CALL_WITH_CONTEXT lower_aarch32_synchronous +.org 0x680 + CALL_WITH_CONTEXT lower_aarch32_irq +.org 0x700 + FIQ_SUSPEND +.org 0x780 + CALL_WITH_CONTEXT lower_aarch32_serror +.org 0x800 + +//------------------------------------------------------------------------------ +// fn __exception_restore_context() +//------------------------------------------------------------------------------ +__exception_restore_context: + ldr w19, [sp, #16 * 16] + ldp lr, x20, [sp, #16 * 15] + + msr SPSR_EL1, x19 + msr ELR_EL1, x20 + + ldp x0, x1, [sp, #16 * 0] + ldp x2, x3, [sp, #16 * 1] + ldp x4, x5, [sp, #16 * 2] + ldp x6, x7, [sp, #16 * 3] + ldp x8, x9, [sp, #16 * 4] + ldp x10, x11, [sp, #16 * 5] + ldp x12, x13, [sp, #16 * 6] + ldp x14, x15, [sp, #16 * 7] + ldp x16, x17, [sp, #16 * 8] + ldp x18, x19, [sp, #16 * 9] + ldp x20, x21, [sp, #16 * 10] + ldp x22, x23, [sp, #16 * 11] + ldp x24, x25, [sp, #16 * 12] + ldp x26, x27, [sp, #16 * 13] + ldp x28, x29, [sp, #16 * 14] + + add sp, sp, #16 * 17 + + eret + +.size __exception_restore_context, . - __exception_restore_context +.type __exception_restore_context, function diff -uNr 10_virtual_mem_part1_identity_mapping/src/bsp/raspberrypi/memory/mmu.rs 11_exceptions_part1_groundwork/src/bsp/raspberrypi/memory/mmu.rs --- 10_virtual_mem_part1_identity_mapping/src/bsp/raspberrypi/memory/mmu.rs +++ 11_exceptions_part1_groundwork/src/bsp/raspberrypi/memory/mmu.rs @@ -15,7 +15,7 @@ /// The kernel's address space defined by this BSP. pub type KernelAddrSpace = AddressSpace<{ memory_map::END_INCLUSIVE + 1 }>; -const NUM_MEM_RANGES: usize = 3; +const NUM_MEM_RANGES: usize = 2; /// The virtual memory layout. /// @@ -35,16 +35,6 @@ }, }, TranslationDescriptor { - name: "Remapped Device MMIO", - virtual_range: remapped_mmio_range_inclusive, - physical_range_translation: Translation::Offset(memory_map::mmio::START + 0x20_0000), - attribute_fields: AttributeFields { - mem_attributes: MemAttributes::Device, - acc_perms: AccessPermissions::ReadWrite, - execute_never: true, - }, - }, - TranslationDescriptor { name: "Device MMIO", virtual_range: mmio_range_inclusive, physical_range_translation: Translation::Identity, @@ -67,11 +57,6 @@ RangeInclusive::new(super::code_start(), super::code_end_exclusive() - 1) } -fn remapped_mmio_range_inclusive() -> RangeInclusive { - // The last 64 KiB slot in the first 512 MiB - RangeInclusive::new(0x1FFF_0000, 0x1FFF_FFFF) -} - fn mmio_range_inclusive() -> RangeInclusive { RangeInclusive::new(memory_map::mmio::START, memory_map::mmio::END_INCLUSIVE) } diff -uNr 10_virtual_mem_part1_identity_mapping/src/bsp.rs 11_exceptions_part1_groundwork/src/bsp.rs --- 10_virtual_mem_part1_identity_mapping/src/bsp.rs +++ 11_exceptions_part1_groundwork/src/bsp.rs @@ -4,7 +4,7 @@ //! Conditional reexporting of Board Support Packages. -pub mod device_driver; +mod device_driver; #[cfg(any(feature = "bsp_rpi3", feature = "bsp_rpi4"))] mod raspberrypi; diff -uNr 10_virtual_mem_part1_identity_mapping/src/exception.rs 11_exceptions_part1_groundwork/src/exception.rs --- 10_virtual_mem_part1_identity_mapping/src/exception.rs +++ 11_exceptions_part1_groundwork/src/exception.rs @@ -13,7 +13,7 @@ //-------------------------------------------------------------------------------------------------- // Architectural Public Reexports //-------------------------------------------------------------------------------------------------- -pub use arch_exception::current_privilege_level; +pub use arch_exception::{current_privilege_level, handling_init}; //-------------------------------------------------------------------------------------------------- // Public Definitions diff -uNr 10_virtual_mem_part1_identity_mapping/src/main.rs 11_exceptions_part1_groundwork/src/main.rs --- 10_virtual_mem_part1_identity_mapping/src/main.rs +++ 11_exceptions_part1_groundwork/src/main.rs @@ -142,6 +142,8 @@ use driver::interface::DriverManager; use memory::mmu::interface::MMU; + exception::handling_init(); + if let Err(string) = memory::mmu::mmu().enable_mmu_and_caching() { panic!("MMU: {}", string); } @@ -160,7 +162,7 @@ /// The main function running after the early init. fn kernel_main() -> ! { - use console::{console, interface::Write}; + use console::console; use core::time::Duration; use driver::interface::DriverManager; use time::interface::TimeManager; @@ -198,13 +200,28 @@ info!("Timer test, spinning for 1 second"); time::time_manager().spin_for(Duration::from_secs(1)); - let remapped_uart = unsafe { bsp::device_driver::PL011Uart::new(0x1FFF_1000) }; - writeln!( - remapped_uart, - "[ !!! ] Writing through the remapped UART at 0x1FFF_1000" - ) - .unwrap(); + // Cause an exception by accessing a virtual address for which no translation was set up. This + // code accesses the address 8 GiB, which is outside the mapped address space. + // + // For demo purposes, the exception handler will catch the faulting 8 GiB address and allow + // execution to continue. + info!(""); + info!("Trying to read from address 8 GiB..."); + let mut big_addr: u64 = 8 * 1024 * 1024 * 1024; + unsafe { core::ptr::read_volatile(big_addr as *mut u64) }; + + info!("************************************************"); + info!("Whoa! We recovered from a synchronous exception!"); + info!("************************************************"); + info!(""); + info!("Let's try again"); + + // Now use address 9 GiB. The exception handler won't forgive us this time. + info!("Trying to read from address 9 GiB..."); + big_addr = 9 * 1024 * 1024 * 1024; + unsafe { core::ptr::read_volatile(big_addr as *mut u64) }; + // Will never reach here in this tutorial. info!("Echoing input now"); // Discard any spurious received characters before going into echo mode. diff -uNr 10_virtual_mem_part1_identity_mapping/tests/boot_test_string.rb 11_exceptions_part1_groundwork/tests/boot_test_string.rb --- 10_virtual_mem_part1_identity_mapping/tests/boot_test_string.rb +++ 11_exceptions_part1_groundwork/tests/boot_test_string.rb @@ -1,3 +1,3 @@ # frozen_string_literal: true -EXPECTED_PRINT = 'Echoing input now' +EXPECTED_PRINT = 'lr : 0x' ```