**Don't see something you want or need here?** Add it to the [Not Yet Awesome Embedded Rust](https://github.com/rust-embedded/not-yet-awesome-embedded-rust) list!
- You can usually find community members (including embedded WG members) in the [`#rust-embedded:matrix.org` Matrix room](https://matrix.to/#/#rust-embedded:matrix.org).
- [The Embedded Rust Book](https://rust-embedded.github.io/book/) - An introductory book about using the Rust Programming Language on "Bare Metal" embedded systems, such as Microcontrollers.
- [Discovery](https://rust-embedded.github.io/discovery) by @rust-embedded — this book is an introductory course on microcontroller-based embedded systems that uses Rust as the teaching language. Original author: @japaric
- [Cortex-M Quickstart](https://docs.rs/cortex-m-quickstart/0.3.1/cortex_m_quickstart/) by @japaric– a template and introduction to embedded Rust, suitable for developers familiar to embedded development but new to embedded Rust.
- [Exploring Rust on Teensy](https://branan.github.io/teensy/) by @branan — Beginner set of articles on getting into embedded dev in Rust.
- [Pragmatic Bare Metal Rust](http://www.hashmismatch.net/pragmatic-bare-metal-rust/) A starter article about starting Rust development on STM32 microcontrollers (cubeMX + FFI).
- [Using Rust in an Embedded Project: A Simple Example](https://spin.atomicobject.com/2016/07/08/rust-embedded-project-example/#.V3-os-6qlZw.hackernews) Article and some links on setting up Rust cross-compiling.
- [32-bit Version (most Pi1 and Pi2 variants)](https://medium.com/@thiagopnts/raspberry-pi-bare-metal-programming-with-rust-a6f145e84024) A starter article on OSdev with Rust on RPi (cross-compiler setup and a very basic LED-blinking kernel).
- [Fearless concurrency](http://blog.japaric.io/fearless-concurrency/) by @japaric — How to easily develop Rust programs for pretty much any ARM Cortex-M microcontroller with memory-safe concurrency.
- [Physical Computing With Rust](https://rahul-thakoor.github.io/physical-computing-rust/) A (WIP) guide to physical computing with Rust on the Raspberry Pi.
- [Internet of Streams](https://www.youtube.com/playlist?list=PLX44HkctSkTewrL9frlUz0yeKLKecebT1) A video series by [@jamesmunns] building a bare metal IoT Sensor Node Platform from (nearly) scratch in Rust
- [Writing an embedded OS in Rust on the Raspberry Pi](https://github.com/rust-embedded/rust-raspi3-OS-tutorials) A set of tutorials that give a guided, step-by-step tour of how to write a monolithic Operating System kernel for an embedded system from scratch. Runs on the Raspberry Pi 3 and the Raspberry Pi 4.
- [xargo](https://github.com/japaric/xargo) Rust package manager with support for non-default std libraries — build rust runtime for your own embedded system.
- [embedded-hal-mock] Mock implementation of `embedded-hal` traits for testing without accessing real hardware. - 
- [bindgen](https://crates.io/crates/bindgen) Automatically generates Rust FFI bindings to C and C++ libraries. - 
- [cargo-fel4](https://github.com/maindotrs/cargo-fel4) A Cargo subcommand for working with feL4 projects. - 
- [Drone OS](https://drone-os.github.io) An Embedded Operating System for writing real-time applications in Rust.
- [FreeRTOS.rs](https://github.com/hashmismatch/freertos.rs) Rust interface for the FreeRTOS API
- [Tock](https://www.tockos.org) An embedded operating system designed for running multiple concurrent, mutually distrustful applications on low-memory and low-power microcontrollers
### Real-time tools
- [RTFM v0.5](https://rtfm.rs/0.5/book/en/) Real-Time For the Masses — A concurrency framework for building real time systems:
- [cortex-m rtfm](https://github.com/rtfm-rs/cortex-m-rtfm) RTFM framework for ARM Cortex-M microcontrollers
- [msp430 rtfm](https://github.com/japaric/msp430-rtfm) RTFM framework for MSP430 MCUs
- [`atsamd11`](https://github.com/atsamd-rs/atsamd) Peripheral access API for Microchip (formerly Atmel) SAMD11 microcontrollers. This git repo hosts both the peripheral access crate and the hal.
- [`atsamd21`](https://github.com/atsamd-rs/atsamd) Peripheral access API for Microchip (formerly Atmel) SAMD21 microcontrollers. This git repo hosts both the peripheral access crate and the hal.
- [`atsamd51`](https://github.com/atsamd-rs/atsamd) Peripheral access API for Microchip (formerly Atmel) SAMD51 microcontrollers. This git repo hosts both the peripheral access crate and the hal.
- [`atsame54`](https://github.com/atsamd-rs/atsamd) Peripheral access API for Microchip (formerly Atmel) SAME54 microcontrollers. This git repo hosts both the peripheral access crate and the hal.
- [`sam3x8e`](https://crates.io/crates/sam3x8e) Peripheral access API for Atmel SAMD3X8E microcontrollers (generated using svd2rust) - 
- [`nrf51`](https://crates.io/crates/nrf51) Peripheral access API for nRF51 microcontrollers (generated using svd2rust) - 
- [`nrf52810-pac`](https://crates.io/crates/nrf52810-pac) - Peripheral access API for the nRF52810 microcontroller (generated using svd2rust) - 
- [`nrf52832-pac`](https://crates.io/crates/nrf52832-pac) - Peripheral access API for the nRF52832 microcontroller (generated using svd2rust) - 
- [`nrf52840-pac`](https://crates.io/crates/nrf52840-pac) - Peripheral access API for the nRF52840 microcontroller (generated using svd2rust) - 
- [`ambiq-apollo3-pac`](https://crates.io/crates/ambiq-apollo3-pac) Peripheral access API for Ambiq Apollo3 microcontrollers (generated using svd2rust)
- [`gd32vf103-pac`](https://github.com/riscv-rust/gd32vf103-pac) Peripheral access API for GD32VF103 RISC-V microcontrollers (generated using svd2rust) - 
Implementations of [`embedded-hal`] for microcontroller families and systems running some OS. - 
- [`atsamd-hal`](https://crates.io/crates/atsamd-hal) - HAL for SAMD11, SAMD21, SAMD51 and SAME54 - 
- [`lpc8xx-hal`](https://crates.io/crates/lpc8xx-hal) - HAL for lpc82x and lpc845 - [](https://crates.io/crates/lpc8xx-hal)
- [`esp8266-hal`](https://github.com/emosenkis/esp8266-hal)  (not supported by rustc, so must be built with [mrustc](https://github.com/thepowersgang/mrustc), typically via the [esp-rs](https://github.com/emosenkis/esp-rs) build script)
- HAL implementation targeted for [Tomu] USB board with EFM32HG309F64 ARMv6-M core. Has support to configure [tomu bootloader] directly from application via `toboot_config` macro.
- [`seedstudio-gd32v`](https://github.com/riscv-rust/seedstudio-gd32v) - Board support crate for the [GD32 RISC-V Dev Board](https://www.seeedstudio.com/SeeedStudio-GD32-RISC-V-Dev-Board-p-4302.html)
- [`hifive1`](https://github.com/riscv-rust/hifive1) - Board support crate for [HiFive1](https://www.sifive.com/boards/hifive1) and [LoFive](https://hackaday.io/project/26909-lofive) boards - 
- [`longan-nano`](https://github.com/riscv-rust/longan-nano) - Board support package for the [Longan Nano board](https://www.seeedstudio.com/Sipeed-Longan-Nano-RISC-V-GD32VF103CBT6-Development-Board-p-4205.html)
- [`solo-bsp`](https://crates.io/crates/solo-bsp) Board Support Crate for [Solo], an open source security token (WIP) - 
- [`stm32f407g-disc`](https://crates.io/crates/stm32f407g-disc) Board Support Crate for the [STM32F4DISCOVERY] (WIP) - 
- [`stm32f429i-disc`](https://crates.io/crates/stm32f429i-disc) Board Support Crate for the [STM32F429DISCOVERY] (WIP) - 
- [`monotron`](https://github.com/thejpster/monotron) - A 1980s home-computer style application for the Texas Instruments Stellaris Launchpad. PS/2 keyboard input, text output on a bit-bashed 800x600 VGA signal. Uses [menu], [vga-framebuffer] and [pc-keyboard].
- [`stellaris-launchpad`](https://crates.io/crates/stellaris-launchpad) - For the Texas Instruments Stellaris Launchpad and Tiva-C Launchpad 
The following crates provide HAL-like abstractions for subcomponents of embedded
devices which go beyond what is available in [`embedded-hal`]:
- [`accelerometer`](https://github.com/NeoBirth/accelerometer.rs) - Generic accelerometer support, including traits and types for taking readings from 2 or 3-axis accelerometers and tracking device orientations - 
- [`usb-device`](https://github.com/mvirkkunen/usb-device): Abstraction layer between USB peripheral crates & USB class crates - 
1. [adafruit-alphanum4] - I2C - Driver for [Adafruit 14-segment LED Alphanumeric Backpack][29] based on the ht16k33 chip - 
1. [ADS1x1x] - I2C - 12/16-bit ADCs like ADS1013, ADS1015, ADS1115, etc. - [Intro blog post][23] - 
1. [shared-bus] - I2C - utility driver for sharing a bus between multiple devices - [Intro post][16] 
1. [Sx127x] - SPI - Long Range Low Power Sub GHz (Gfsk, LoRa) RF Transceiver - [Intro blog post][34] - 
1. [Sx128x] - SPI - Long range, low power 2.4 GHz (Gfsk, Flrc, LoRa) RF Transceiver - [Intro blog post][35] - 
1. [usbd-hid-device] - USB HID class implementation without `unsafe` - [github][40] - 
1. [usbd-midi] - USB MIDI class implementation - [github][41] - 
1. [BME280] - A rust device driver for the Bosch BME280 temperature, humidity, and atmospheric pressure sensor and the Bosch BMP280 temperature and atmospheric pressure sensor. 
1. [bme680] - I2C - Temperature / humidity / gas / pressure sensor - 
1. [BMP280] - A platform agnostic driver to interface with the BMP280 pressure sensor 
1. [DW1000] - SPI - Radio transceiver for communication based on IEEE 802.15.4 and position tracking - 
1. [eink-waveshare] - SPI - driver for E-Paper Modules from Waveshare
1. [iAQ-Core] - I2C - iAQ-Core-C/iAQ-Core-P Gas and VOC sensor driver for monitoring indoor air quality.
1. [ILI9341] - SPI - TFT LCD display
1. [INA260] - I2C - power monitor - 
1. [LM75] - I2C - Temperature sensor and thermal watchdog - 
1. [LS010B7DH01] - SPI - Memory LCD
1. [LSM303C] - A platform agnostic driver to interface with the LSM303C (accelerometer + compass) 
1. [MAX7219] - SPI - LED display driver - 
1. [MCP49xx] - SPI - 8/10/12-bit DACs like MCP4921, MCP4922, MCP4801, etc. - 
1. [MCP9808] - I2C - Temperature sensor - 
1. [MFRC522] - SPI - RFID tag reader/writer
1. [motor-driver] - Motor drivers: L298N, TB6612FNG, etc.
1. [MPU6050] - I2C - no_std driver for the MPU6050 
1. [MPU9250] - no_std driver for the MPU9250 (and other MPU* devices) & onboard AK8963 (accelerometer + gyroscope + magnetometer IMU) 
1. [NRF24L01] - SPI - 2.4 GHz wireless communication
1. [OneWire] - 1wire - OneWire protocol implementation with drivers for devices such as [DS18B20](https://datasheets.maximintegrated.com/en/ds/DS18B20.pdf) - 
1. [ST7735-lcd] - SPI - An embedded-graphics compatible driver for the popular lcd family from Sitronix 
1. [TPA2016D2] - I2C - A driver for interfacing with the Texas Instruments TPA2016D2 Class-D amplifier - 
1. [vesc-comm] - A driver for communicating with [VESC-compatible electronic speed controllers](http://vedder.se/2015/01/vesc-open-source-esc/) 
1. [VL53L0X] - A platform agnostic driver to interface with the vl53l0x (time-of-flight sensor) 
1. [bbqueue](https://crates.io/crates/bbqueue): A SPSC, statically allocatable queue based on BipBuffers suitable for DMA transfers - 
1. [bitmatch]: A crate that allows you to match, bind, and pack the individual bits of integers. - 
1. [biquad]: A library for creating second order IIR filters for signal processing based on Biquads, where both a Direct Form 1 (DF1) and Direct Form 2 Transposed (DF2T) implementation is available. 
1. [bit_field](https://crates.io/crates/bit_field): manipulating bitfields and bitarrays - 
1. [bluetooth-hci](https://crates.io/crates/bluetooth-hci): device-independent Bluetooth Host-Controller Interface implementation. 
1. [bounded-registers](https://crates.io/crates/bounded-registers) A high-assurance memory-mapped register code generation and interaction library. `bounded-registers` provides a Tock-like API for MMIO registers with the addition of type-based bounds checking. - 
1. [console-traits](https://github.com/thejpster/console-traits): Describes a basic text console. Used by [menu] and implemented by [vga-framebuffer]. 
1. [`cmim`], or Cortex-M Interrupt Move: A crate for Cortex-M devices to move data to interrupt context, without needing a critical section to access the data within an interrupt, and to remove the need for the "mutex dance" - 
1. [dcmimu]: An algorithm for fusing low-cost triaxial MEMS gyroscope and accelerometer measurements 
1. [gcode](https://github.com/Michael-F-Bryan/gcode-rs): A gcode parser for no-std applications - [](https://crates.io/crates/gcode)
1. [ieee802154](https://crates.io/crates/ieee802154): Partial implementation of the IEEE 802.15.4 standard - 
1. [infrared](https://crates.io/crates/infrared): infrared remote control library for embedded rust - 
1. [intrusive-collections](https://crates.io/crates/intrusive-collections): intrusive (non-allocating) singly/doubly linked lists and red-black trees - 
1. [irq](https://crates.io/crates/irq): utilities for writing interrupt handlers (allows moving data into interrupts, and sharing data between them) - 
1. [managed](https://crates.io/crates/managed): provides `ManagedSlice`, `ManagedMap` backed by either their std counterparts or fixed-size buffers for `#![no_std]`. - 
1. [menu]: A basic command-line interface library. Has nested menus and basic help functionality. 
1. [micromath](https://github.com/NeoBirth/micromath): Embedded Rust math library featuring fast, safe floating point approximations for common arithmetic operations, 2D and 3D vector types, and statistical analysis - 
1. [nalgebra](https://crates.io/crates/nalgebra): general-purpose and low-dimensional linear algebra library - 
1. [num-format](https://crates.io/crates/num-format): Crate for producing string representations of numbers, formatted according to international standards, e.g. "1,000,000" for US English - 
1. [`panic-persist`]: A panic handler crate inspired by `panic-ramdump` that logs panic messages to a region of RAM defined by the user, allowing for discovery of panic messages post-mortem using normal program control flow. - 
1. [pc-keyboard]: A PS/2 keyboard protocol driver. Transport (bit-banging or SPI) agnostic, but can convert Set 2 Scancodes into Unicode. 
1. [qei](https://crates.io/crates/qei) : A qei wrapper that allows you to extend your qei timers from a 16 bit integer to a 64 bit integer. - 
1. [qemu-exit]: Quit a running QEMU session with user-defined exit code. Useful for unit or integration tests using QEMU. - 
1. [register-rs](https://github.com/rust-embedded/register-rs): Unified interface for MMIO and CPU registers. Provides type-safe bitfield manipulation. `register-rs` is Tock registers with added support for CPU register definitions using the same API as for the MMIO registers. This enables homogeneous interfaces to registers of all kinds. - 
1. [scroll](https://crates.io/crates/scroll): extensible and endian-aware Read/Write traits for generic containers - 
1. [smoltcp](https://github.com/m-labs/smoltcp): a small TCP/IP stack that runs without `alloc`. 
1. [tinybmp](https://crates.io/crates/tinybmp): No-std, no-alloc BMP parser for embedded systems. [Introductory blog post](https://wapl.es/rust/2019/03/04/embedded-graphics-0.4.7-bmp-support.html) - 
1. [vga-framebuffer]: A VGA signal generator and font renderer for VGA-less microcontrollers. Used by [Monotron](https://github.com/thejpster/monotron) to generate 48 by 36 character display using 3 SPI peripherals and a timer. 
1. [wyhash]: A fast, simple and portable hashing algorithm and random number generator. - 
