mirror of https://github.com/pikvm/pikvm
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
17f96e64bb
|
3 years ago | |
|---|---|---|
| .. | ||
| README.md | 3 years ago | |
| case_a.png | 3 years ago | |
| case_a.stl | 3 years ago | |
| case_a_no_oled.png | 3 years ago | |
| case_a_no_oled.stl | 3 years ago | |
| case_b.png | 3 years ago | |
| case_b.stl | 3 years ago | |
| case_b_no_aum.png | 3 years ago | |
| case_b_no_aum.stl | 3 years ago | |
| low_spacer.png | 3 years ago | |
| low_spacer.stl | 3 years ago | |
| spacer_1mm.png | 3 years ago | |
| spacer_1mm.stl | 3 years ago | |
| spacer_2mm.png | 3 years ago | |
| spacer_2mm.stl | 3 years ago | |
| spacer_6.2mm.png | 3 years ago | |
| spacer_6.2mm.stl | 3 years ago | |
README.md
Pi-KVM v3.2 Plastic Case for 3D printing
When printing the case, you can choose the following options:
- The presence or absence of an OLED screen (used to display the IP address and other information).
- The presence or absence of holes for the AUM v3.3 (Advanced USB Module, most likely you don't have it).
Buy options
- Small 5v fan strongly recommended to avoid overheating in the case.
- I2C OLED screen.
Building
See this video.
The front part
Choose ONE of them.
| Variant | Description |
|---|---|
 |
The front part of the case WITHOUT a hole for the OLED |
 |
The front part of the case with a hole for installing the OLED |
The back part
Choose ONE of them.
| Variant | Description |
|---|---|
 |
The back part of the case WITHOUT AUM holes |
 |
The back part of the case for installing the AUM |
Spacers
| Type | Description |
|---|---|
 |
6.2mm spacer, required TWO pieces |
 |
2mm spacer required ONE without AUM or TWO for AUM |
 |
1mm spacer required ONE for AUM only |
 |
Low spacer required ONE |