mirror of
https://github.com/pikvm/pikvm
synced 2024-11-16 12:12:57 +00:00
| .. | ||
| case_a_no_oled.png | ||
| case_a_no_oled.stl | ||
| case_a.png | ||
| case_a.stl | ||
| case_b_no_aum.png | ||
| case_b_no_aum.stl | ||
| case_b.png | ||
| case_b.stl | ||
| low_spacer.png | ||
| low_spacer.stl | ||
| README.md | ||
| spacer_1mm.png | ||
| spacer_1mm.stl | ||
| spacer_2mm.png | ||
| spacer_2mm.stl | ||
| spacer_6.2mm.png | ||
| spacer_6.2mm.stl | ||
Pi-KVM v3.2 Plastic Case for 3D printing
When printing the case, you can choose the following options:
- The presence or absence of an OLED screen (used to display the IP address and other information).
- The presence or absence of holes for the AUM v3.3 (Advanced USB Module, most likely you don't have it).
Buy options
- Small 5v fan strongly recommended to avoid overheating in the case.
- I2C OLED screen.
Building
See this video.
The front part
Choose ONE of them.
| Variant | Description |
|---|---|
 |
The front part of the case WITHOUT a hole for the OLED |
 |
The front part of the case with a hole for installing the OLED |
The back part
Choose ONE of them.
| Variant | Description |
|---|---|
 |
The back part of the case WITHOUT AUM holes |
 |
The back part of the case for installing the AUM |
Spacers
| Type | Description |
|---|---|
 |
6.2mm spacer, required TWO pieces |
 |
2mm spacer required TWO for AUM or ONE without AUM |
 |
1mm spacer required ONE for AUM only |
 |
Low spacer required ONE |