# Pi-KVM v3.3 Plastic Case for 3D printing
When printing the case, you can choose the following options:
- The presence or absence of an OLED screen (used to display the IP address and other information).
- The presence or absence of holes for the AUM v3.3 (Advanced USB Module, most likely you don't have it).

The case consists of several parts.
**TODO**
```
добавить ссылки на запчасти https://www.pishop.us/product/5v-cooling-fan/
для всех случаев 6.2 2штуки
для аума по штуке 1мм и 2мм
без аума 2мм 2шт
остальное по 1 шт
```

# The front part
Choose **one** of them.
| Variant | Description |
|---------|-------------|
| <img src="./stl/v3.2/case_a_no_oled.png" width=200 /> | [The front part](../stl/v3.2/case_a_no_oled.stl) of the case **WITHOUT a hole** for the OLED |
| <img src="./stl/v3.2/case_a.png" width=200 /> | [The front part](../stl/v3.2/case_a.stl) of the case with a hole **for installing the OLED** |

# The back part
Choose **one** of them.
| Variant | Description |
|---------|-------------|
| <img src="./stl/v3.2/case_b_no_aum.png" width=200 /> | [The back part](../stl/v3.2/case_b_no_aum.stl) of the case **WITHOUT AUM holes** |
| <img src="./stl/v3.2/case_b.png" width=200 /> | [The back part](../stl/v3.2/case_b.stl) of the case **for installing the AUM** |