@ -3,10 +3,10 @@ As a first step we recommend carefully reading our documentation on [GitHub](htt
## Hardware
### LEDs / Switches do not work in ATX control.
- Double check your wiring as per [the documentation](https://github.com/tryallthethings/pikvm/tree/documentation#setting-up-the-v2). Make sure you placed the relays (G3VM-61A1) in the correct orientation. The relays for switches (Power, Reset) have a different orientation than the ones for LEDs.
- Double check your wiring as per [the documentation](/README.md#setting-up-the-v2). Make sure you placed the relays (G3VM-61A1) in the correct orientation. The relays for switches (Power, Reset) have a different orientation than the ones for LEDs.
### Pi-KVM does not show any image from the connected computer.
- Double check if you connected the HDMI-CSI-2 bridge cable correctly. [Check the documentation for details](https://github.com/tryallthethings/pikvm/tree/documentation#for-the-hdmi-csi-bridge) A red LED will light up on the bridge if it is connected properly.
- Double check if you connected the HDMI-CSI-2 bridge cable correctly. [Check the documentation for details](/README.md#for-the-hdmi-csi-bridge) A red LED will light up on the bridge if it is connected properly.
- Some laptops do not output any signal until you switched the ouput (usually via the FN + and an F5 key on the keyboard).
Devaev Maxim
4 years ago