@ -14,7 +14,7 @@ Specifically to v2. When combined with configuring a DNS server, FTP, or SMB (fo
host_mac: 48:6f:73:74:50:43
kvm_mac: 42:61:64:55:53:42
```
The `host_mac` address will be used on the server's network interface. The `kvm_mac` means the address that will be assigned to the local interface on the Pi-KVM. The KVM interface will be called `usb0`.r's network interface. If the `host_mac` or `kvm_mac` is not specified, a random value will be used. The `driver` parameter means the protocol that will be used for the USB network. The default value is `ecm` so it can be passed it this example. Other possible values are `eem`, `ncm` and `rndis`.
The `host_mac` address will be used on the server's network interface. The `kvm_mac` means the address that will be assigned to the local interface on the Pi-KVM. The KVM interface will be called `usb0`network interface. If the `host_mac` or `kvm_mac` is not specified, a random value will be used. The `driver` parameter means the protocol that will be used for the USB network. The default value is `ecm` so it can be passed it this example. Other possible values are `eem`, `ncm` and `rndis`.
2. To automatically configure the USB network on the server recommended using the service `kvmd-otgnet`. It configures the firewall, assigns an address to the local Pi-KVM interface `usb0` and starts DHCP so the managed server can get the IPv4 address. By default, the address `169.254.0.1/28` to interface `usb0` will be assigned. One of the other addresses from the network `169.254.0.0./28` will be assigned to the server when it requests it via DHCP. For security reasons, all incoming connections from the server to the Pi-KVM side are blocked (except for ICMP and UDP port 67 which is used for DHCP). If you want to allow access from the server to the Pi-KVM interface, then you need to add ports 80 and 443 to the whitelist using `/etc/kvmd/override.yaml` file like this:
```yaml
otgnet:
@ -52,4 +52,4 @@ By default, `kvmd-otgnet` will configure network connection between Pi-KVM and t