* MicroSD card (at least 16Gb, class 10 recommended).
* MicroSD card (at least 16Gb, class 10 recommended).
* USB-C to USB-A cable.
* USB-C to USB-A cable.
* HDMI cable.
* HDMI cable.
* [Straight Ethernet cable](https://www.home-network-help.com/straight.html) (for the ATX expansion board connection).
* [Straight Ethernet cable](https://www.home-network-help.com/straight.html) (for the ATX board connection).
* Power supply unit (5.1V 3A USB-C, recommended by the Raspberry Pi).
* Power supply unit (5.1V 3A USB-C, recommended by the Raspberry Pi).
@ -60,7 +60,50 @@ If you have a kit without a metal case, you can use our free 3D printing case dr
## ATX connection
## ATX connection
**======================== TODO =========================**
To manage the power of your computer, you will need to install an ATX adapter board inside the case and connect it to the motherboard.
1. Connect the rainbow wires as follows to the board. Optionally print [the mounting plate](stl/atx/index.md){target=_blank} for the PCI slot on a 3D-printer. Assemble everything like on pictures below. Secure wires in any convenient way (we used soft ties).
??? example
<imgsrc="atx_board_1.jpg"/>
<imgsrc="atx_board_2.jpg"/>
<imgsrc="atx_board_3.jpg"/>
2. Find the pins on the motherboard responsible for connecting the buttons and LEDs of the front panel of the case. Usually wires and connectors on the motherboard have designations. If you're not sure, check the documentation on your motherboard.
??? example
<imgsrc="atx_board_4.jpg"/>
<imgsrc="atx_board_5.jpg"/>
3. Place the ATX board nearby and, focusing on the signatures, connect the male pins to the female pin of the front panel wires, observing the polarity (the polarity is indicated on the ATX board).
??? example
<imgsrc="atx_board_6.jpg"/>
4. Repeat the procedure with the female pin of the ATX board by connecting them to the motherboard connector. Check the documentation on your motherboard.
??? example
<imgsrc="atx_board_7.jpg"/>
5. Install the ATX board into the PCI slot of the case and fix it with a screw, or use a different mounting method at your discretion.
??? example
<imgsrc="atx_board_8.jpg"/>
<imgsrc="atx_board_9.jpg"/>
6. Arrange the wires in a way that is convenient for you and fix them if necessary.
??? example
<imgsrc="atx_board_10.jpg"/>
7. Connect the ATX board to PiKVM using a [straight Ethernet cable](https://www.home-network-help.com/straight.html).