diff --git a/docs/ezcoo.md b/docs/ezcoo.md
index 3f7dfce..390d778 100644
--- a/docs/ezcoo.md
+++ b/docs/ezcoo.md
@@ -7,10 +7,15 @@ The ezCoo managed switch can be controlled by PiKVM to allow it to connect to mu
 
 !!! info
     Audio was not tested, it is assumed to be non-functional.
-
+    
+!!! tip 
+    ezCoo EZ-SW41HA-KVMU3L - includes 4x1m USB 3.0 A Male to A Male.
+    You will need 1 extra USB A Male to USB Micro B to connect from the PiKVM to the ezcoo "F/W CTL - Management" port
 
 ## Connections
 
+!!! tip "EZCOO Wiring example can be found [here](https://docs.pikvm.org/wiring_examples/) Scroll down to bottom of page for picture" 
+
 Please review the item description and manual before deploying.
 
 From a high level, the ezCoo switch uses standard connections to the host machines (USB-A to USB-B and HDMI for USB2 version, USB-A to USB-A for the USB3 version). The Raspberry Pi OTG connector (the one coming from the USB-C port on a Pi 4 via the custom splitter cable or device) should be connected to the USB 3 port on the ezCoo switch. There is an additional USB cable connected to the managed port on the switch.
@@ -182,6 +187,6 @@ kvmd:
 ```
 
 
-!!! tip "EZCOO Wiring example can be found [here](https://docs.pikvm.org/wiring_examples/)"
+