Update multiport.md (#330)

* Update multiport.md

Added verbiage to the Ali's noname for clarity

* Update multiport.md

Changed the verbiage by adding limitations to its own section

pages/multiport.md

@@ -16,6 +16,13 @@ Here the status is:
 | Model | Status | Notes |
 |:------|:-------|:------|
 | [ezCoo EZ-SW41HA-KVMU3L 4x1 switch](https://www.easycoolav.com/products/hdmi20-switch-4x1-with-usb30-kvm-3-port-usbsupport-4k60hz-444-and-hdr-audio-breakout-36) ~~[ezCoo SW41HA HDMI 4x1 switch](https://www.easycoolav.com/products/hdmi20-switch-4x1-with-usb20-kvm-4-port-usbsupport-4k60hz-444-and-hdr-audio-breakout)~~ (legacy) | ✔ | [Using with Pi-KVM](ezcoo.md) |
-| [Ali's noname](https://a.aliexpress.com/_BSpS8t) | ✔ | [Here are the details](https://github.com/pikvm/pikvm/issues/128) |
-| [Aimos 8-port HDMI USB-C KVM Switch](https://www.amazon.de/AIMOS-Umschalter-Tastatur-unterst%C3%BCtzen-verbunden/dp/B08FR5K111/) | ✔ | Similar to Ali's noname model, available in 4/8port editions, has same HDMI bridge boot problem/solution using a Marmitek 312 UHD HDMI splitter [See here for details](https://github.com/pikvm/pikvm/issues/128) |
+| [Ali's noname](https://a.aliexpress.com/_BSpS8t) | ✔ | Limitations are are listed below [See here for some additional details](https://github.com/pikvm/pikvm/issues/128) |
+| [Aimos 8-port HDMI USB-C KVM Switch](https://www.amazon.de/AIMOS-Umschalter-Tastatur-unterst%C3%BCtzen-verbunden/dp/B08FR5K111/) | ✔ | Similar to Ali's noname model, available in 4/8port editions, has same HDMI bridge boot problem/solution using a Marmitek 312 UHD HDMI splitter. Limitations are are listed below [See here for some additional details](https://github.com/pikvm/pikvm/issues/128) |
 | [TESmart 8 PORT - HDMI KVM SWITCH](https://buytesmart.com/collections/8-ports) |  ✔ | Use OTG with USB 2.0 Hub only, no hotkey support. Switching available with serial or IP-to-serial interface using fixed IP (/31 peer-to-peer addressing supported). Can be managed [via WebUI](tesmart.md) or [CLI tool](https://github.com/bbeaudoin/bash/tree/master/tesmart) |
+
+Limitations:
+- HDMI backpower needs to be mitigated
+- MSD work around is needed as it will not work OOB
+    - **Solutions**
+        - Solution 1: RPi4 OTG needs to be in the KB port for mouse and KB funtionality, ZeroW is required and needs to be connected to the HUB port for HK switching and MSD functionality - ✔**KNOWN WORKING**✔
+        - Solution 2: Aurduino is needed (WIP) - Please report in the channel that this solution works for you