Create case.md

stl/v3.2/case.md

@@ -0,0 +1,28 @@
+# Pi-KVM v3.3 Plastic Case for 3D printing
+When printing the case, you can choose the following options:
+- The presence or absence of an OLED screen (used to display the IP address and other information).
+- The presence or absence of holes for the AUM v3.3 (Advanced USB Module, most likely you don't have it).
+
+The case consists of several parts.
+**TODO**
+```
+добавить ссылки на запчасти https://www.pishop.us/product/5v-cooling-fan/
+для всех случаев 6.2 2штуки
+для аума по штуке 1мм и 2мм
+без аума 2мм 2шт
+остальное по 1 шт
+```
+
+# The front part
+Choose **one** of them.
+| Variant | Description |
+|---------|-------------|
+| <img src="../stl/v3.2/case_a_no_oled.png" width=200 /> | [The front part](../stl/v3.2/case_a_no_oled.stl) of the case **WITHOUT a hole** for the OLED |
+| <img src="../stl/v3.2/case_a.png" width=200 /> | [The front part](../stl/v3.2/case_a.stl) of the case with a hole **for installing the OLED** |
+
+# The back part
+Choose **one** of them.
+| Variant | Description |
+|---------|-------------|
+| <img src="../stl/v3.2/case_b_no_aum.png" width=200 /> | [The back part](../stl/v3.2/case_b_no_aum.stl) of the case **WITHOUT AUM holes** |
+| <img src="../stl/v3.2/case_b.png" width=200 /> | [The back part](../stl/v3.2/case_b.stl) of the case **for installing the AUM** |