mirror of
https://github.com/pikvm/pikvm
synced 2024-11-16 12:12:57 +00:00
18 lines
1.1 KiB
Markdown
18 lines
1.1 KiB
Markdown
|
Insert the flexible flat cable of the HDMI-CSI bridge into the narrow white connector on the Raspberry Pi
|
||
|
|
(the closest one to big USB sockets). It is labeled `CAMERA`. To insert you need to open the connector first.
|
||
|
|
On the Raspberry Pi side you can gently lift the black part up and a little bit sideways:
|
||
|
|
|
||
|
|
| Opening the MIPI CSI slot on the Raspberry Pi |
|
||
|
|
|-----------------------------------------------|
|
||
|
|
| <img src="../_diy/open_mipi_csi.jpg" width="500"> |
|
||
|
|
|
||
|
|
For the HDMI-CSI bridge this operation depends on the version you bought.
|
||
|
|
Either pull it gently up as on the Raspberry or push it sideways.
|
||
|
|
Make sure that the cable is inserted on the correct side and until it stops, and then push the black latch back.
|
||
|
|
Never connect or disconnect the flat cable from a powered device. This is not Plug-and-Play, and you can damage it.
|
||
|
|
Also use only the cable that was included with the device package, or make sure that the third-party cable has the correct pinout.
|
||
|
|
|
||
|
|
| HDMI-CSI bridge connected to Raspberry Pi 4 |
|
||
|
|
|---------------------------------------------|
|
||
|
|
| <img src="../_diy/rpi4_csi_connection.jpg" width="500"> |
|