2021-09-26 08:47:33 +00:00
# PiKVM v3.3 Plastic Case for 3D printing
2021-10-14 05:35:55 +00:00
2021-08-25 15:41:09 +00:00
When printing the case, you can choose the following options:
2021-10-12 18:45:00 +00:00
* The presence or absence of an OLED screen (used to display the IP address and other information).
2021-08-25 15:41:09 +00:00
2021-10-14 05:35:55 +00:00
Also take a look at the [PCI bracket for ATX adapter board ](../atx ).
2021-08-25 15:41:09 +00:00
## Buy options
2021-10-12 18:45:00 +00:00
2021-08-25 15:41:09 +00:00
* [Small 5v fan ](https://www.amazon.com/GeeekPi-Raspberry-30x30x7mm-Brushless-Retroflag/dp/B07C9C99RM ) **strongly recommended** to avoid overheating in the case.
* [I2C OLED screen ](https://www.amazon.com/Pieces-Display-Module-SSD1306-Screen/dp/B08TLXYKS6 ).
2021-10-14 05:35:55 +00:00
2021-08-25 15:41:09 +00:00
## Building
2021-10-12 18:45:00 +00:00
2021-10-14 05:35:55 +00:00
2021-10-12 18:45:00 +00:00
## Parts
### The front part
2021-08-25 15:41:09 +00:00
**Choose ONE of them.**
2021-10-12 18:45:00 +00:00
2021-08-25 15:41:09 +00:00
| Variant | Description |
|---------|-------------|
| < img src = "case_a_no_oled.png" width = 200 /> | [The front part ](case_a_no_oled.stl ) of the case **WITHOUT a hole** for the OLED |
| < img src = "case_a.png" width = 200 /> | [The front part ](case_a.stl ) of the case with a hole **for installing the OLED** |
2021-10-14 05:35:55 +00:00
2021-10-12 18:45:00 +00:00
### The back part
2021-08-25 15:41:09 +00:00
| Variant | Description |
|---------|-------------|
2021-08-25 15:57:45 +00:00
| < img src = "case_b.png" width = 200 /> | [The back part ](case_b.stl ) of the case |
2021-08-25 15:41:09 +00:00
2021-10-14 05:35:55 +00:00
2021-10-12 18:45:00 +00:00
### Spacers
2021-08-25 15:41:09 +00:00
| Type | Description |
|------|-------------|
| < img src = "spacer_6.2mm.png" width = 200 /> | [6.2mm spacer ](spacer_6.2mm.stl ), required **TWO** pieces |
| < img src = "spacer_1mm.png" width = 200 /> | [1mm spacer ](spacer_1mm.stl ) required **TWO** pieces |
| < img src = "low_spacer.png" width = 200 /> | [Low spacer ](low_spacer.stl ) required **ONE** piece |
