mirror of
https://github.com/pikvm/pikvm
synced 2024-11-16 12:12:57 +00:00
16 lines
1011 B
Markdown
16 lines
1011 B
Markdown
|
With this part, you will be able to remotely turn on, turn off and restart your computer!
|
||
|
|
|
||
|
|
* *x4* [MOSFET relays OMRON G3VM-61A1](https://www.digikey.com/products/en?keywords=G3VM-61A1).<br>
|
||
|
|
*Don't use random relay modules or random optocouplers! Some of these may not be sensitive enough
|
||
|
|
for the Raspberry Pi, some others may be low-level controlled. Either use relays that are activated by a high logic level,
|
||
|
|
or follow the design provided and buy an OMRON. See details [here](https://github.com/pikvm/pikvm/issues/13).*
|
||
|
|
* *x4* 390 Ohm resistors (see [here](https://github.com/pikvm/pikvm/issues/46) for alternatives).
|
||
|
|
* *2x* 4.7 kOhm resistors.
|
||
|
|
* *x10+* dupont wires male-male.
|
||
|
|
* *x1* a breadboard.
|
||
|
|
* *various* wires for the breadboard.
|
||
|
|
|
||
|
|
This can be partially replaced by using [Wake-on-LAN](wol.md) in the software, but it will not allow
|
||
|
|
to reboot a hung system, and it is not as reliable as an ATX controller. Sometimes the Wake-on-LAN
|
||
|
|
on the host just stops working, for its own or network reasons.
|