2023-07-25 16:22:41 +00:00
|
|
|
# Dynamic USB configuration
|
|
|
|
|
|
|
|
|
|
PiKVM emulates a number of USB devices to ensure normal operation: keyboards, mouse and mass storage drive.
|
|
|
|
|
Also an additional [relative mouse](mouse.md) may be present (like on PiKVM V4 by default),
|
|
|
|
|
or a user configured [USB Ethernet](usb_ethernet.md) or [Serial port](usb_serial.md).
|
|
|
|
|
|
|
|
|
|
In rare cases, the host BIOS/UEFI may not understand such a large number of emulated devices on single USB port,
|
|
|
|
|
so some of them may need to be disabled. USB reconfiguration usually requires a reboot, but it is possible
|
|
|
|
|
to temporarily disable already configured existing emulated devices.
|
|
|
|
|
|
|
|
|
|
!!! warning
|
|
|
|
|
This feature is experimental. Due to the imperfections of the kernel modules, rarely a dynamic configuration change
|
|
|
|
|
can lead to a kernel panic and reboot.
|
|
|
|
|
|
|
|
|
|
For PiKVM V3 and V4 this is considered more secure because they have two independent watchdog systems
|
|
|
|
|
that can bring devices back to life after a timeout of a few minutes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## Command-line utility
|
|
|
|
|
|
|
|
|
|
The `kvmd-otgconf` utility allows you to view and modify the USB configuration on the fly.
|
|
|
|
|
It requires root permission and can be used for example from a web terminal.
|
|
|
|
|
|
|
|
|
|
View the config:
|
|
|
|
|
```
|
|
|
|
|
# kvmd-otgconf
|
|
|
|
|
+ hid.usb0 # Keyboard
|
|
|
|
|
+ hid.usb1 # Absolute Mouse
|
|
|
|
|
+ hid.usb2 # Relative Mouse
|
|
|
|
|
+ mass_storage.usb0 # Mass Storage Drive
|
|
|
|
|
```
|
|
|
|
|
Each line represents a device (function). First comes plus or minus sign (the device on or off), then the name of the device and its description.
|
|
|
|
|
|
|
|
|
|
Disabling the device:
|
|
|
|
|
```
|
|
|
|
|
[root@pikvm ~]# kvmd-otgconf --disable-function mass_storage.usb0
|
|
|
|
|
+ hid.usb0 # Keyboard
|
|
|
|
|
+ hid.usb1 # Absolute Mouse
|
|
|
|
|
+ hid.usb2 # Relative Mouse
|
|
|
|
|
- mass_storage.usb0 # Mass Storage Drive
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
Enabling the device:
|
|
|
|
|
```
|
|
|
|
|
[root@pikvm ~]# kvmd-otgconf --enable-function mass_storage.usb0
|
|
|
|
|
+ hid.usb0 # Keyboard
|
|
|
|
|
+ hid.usb1 # Absolute Mouse
|
|
|
|
|
+ hid.usb2 # Relative Mouse
|
|
|
|
|
+ mass_storage.usb0 # Mass Storage Drive
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## Web UI menu
|
|
|
|
|
|
|
|
|
|
Using the pseudo-GPIO driver, you can also control devices via the menu in the web interface.
|
|
|
|
|
Read about GPIO basics [here](gpio.md).
|
|
|
|
|
|
2023-08-06 02:13:47 +00:00
|
|
|
To setup the menu, use `kvmd-otgconf --make-gpio-config` to generate the configuration, and combine it
|
2023-07-25 16:22:41 +00:00
|
|
|
with your existing one in `/etc/kvmd/override.yaml` in a usual way.
|
|
|
|
|
|
|
|
|
|
```yaml
|
|
|
|
|
# kvmd-otgconf --make-gpio-config
|
|
|
|
|
kvmd:
|
|
|
|
|
gpio:
|
|
|
|
|
drivers:
|
|
|
|
|
otgconf:
|
|
|
|
|
type: otgconf
|
|
|
|
|
scheme:
|
|
|
|
|
hid.usb0:
|
|
|
|
|
driver: otgconf
|
|
|
|
|
mode: output
|
|
|
|
|
pin: hid.usb0
|
|
|
|
|
pulse:
|
|
|
|
|
delay: 0
|
|
|
|
|
hid.usb1:
|
|
|
|
|
driver: otgconf
|
|
|
|
|
mode: output
|
|
|
|
|
pin: hid.usb1
|
|
|
|
|
pulse:
|
|
|
|
|
delay: 0
|
|
|
|
|
hid.usb2:
|
|
|
|
|
driver: otgconf
|
|
|
|
|
mode: output
|
|
|
|
|
pin: hid.usb2
|
|
|
|
|
pulse:
|
|
|
|
|
delay: 0
|
|
|
|
|
mass_storage.usb0:
|
|
|
|
|
driver: otgconf
|
|
|
|
|
mode: output
|
|
|
|
|
pin: mass_storage.usb0
|
|
|
|
|
pulse:
|
|
|
|
|
delay: 0
|
|
|
|
|
view:
|
|
|
|
|
table:
|
|
|
|
|
- - '#Keyboard'
|
|
|
|
|
- '#hid.usb0'
|
|
|
|
|
- hid.usb0
|
|
|
|
|
- - '#Absolute Mouse'
|
|
|
|
|
- '#hid.usb1'
|
|
|
|
|
- hid.usb1
|
|
|
|
|
- - '#Relative Mouse'
|
|
|
|
|
- '#hid.usb2'
|
|
|
|
|
- hid.usb2
|
|
|
|
|
- - '#Mass Storage Drive'
|
|
|
|
|
- '#mass_storage.usb0'
|
|
|
|
|
- mass_storage.usb0
|
|
|
|
|
```
|
