#!/usr/bin/env bash PROGRAM="Osync" # Rsync based two way sync engine with fault tolerance AUTHOR="(L) 2013-2015 by Orsiris \"Ozy\" de Jong" CONTACT="http://www.netpower.fr/osync - ozy@netpower.fr" PROGRAM_VERSION=1.1-dev PROGRAM_BUILD=2015091001 ## type doesn't work on platforms other than linux (bash). If if doesn't work, always assume output is not a zero exitcode if ! type -p "$BASH" > /dev/null; then echo "Please run this script only with bash shell. Tested on bash >= 3.2" exit 127 fi ## allow debugging from command line with preceding ocsync with DEBUG=yes if [ ! "$_DEBUG" == "yes" ]; then _DEBUG=no SLEEP_TIME=.1 else SLEEP_TIME=3 fi SCRIPT_PID=$$ LOCAL_USER=$(whoami) LOCAL_HOST=$(hostname) ## Default log file until config file is loaded if [ -w /var/log ]; then LOG_FILE=/var/log/osync.log else LOG_FILE=./osync.log fi ## Default directory where to store temporary run files if [ -w /tmp ]; then RUN_DIR=/tmp elif [ -w /var/tmp ]; then RUN_DIR=/var/tmp else RUN_DIR=. fi ## Working directory. Will keep current file states, backups and soft deleted files. OSYNC_DIR=".osync_workdir" ## Log a state message every $KEEP_LOGGING seconds. Should not be equal to soft or hard execution time so your log won't be unnecessary big. KEEP_LOGGING=1801 ## Correct output of sort command (language agnostic sorting) export LC_ALL=C ALERT_LOG_FILE=$RUN_DIR/osync_lastlog function Dummy { sleep .1 } function _logger { local value="${1}" # What to log echo -e "$value" >> "$LOG_FILE" if [ $_SILENT -eq 0 ]; then echo -e "$value" fi } function Logger { local value="${1}" # What to log local level="${2}" # Log level: DEBUG, NOTICE, WARN, ERROR, CRITIAL # Special case in daemon mode we should timestamp instead of counting seconds if [ $sync_on_changes -eq 1 ]; then prefix="$(date) - " else prefix="TIME: $SECONDS - " fi if [ "$level" == "CRITICAL" ]; then _logger "$prefix\e[41m$value\e[0m" ERROR_ALERT=1 elif [ "$level" == "ERROR" ]; then _logger "$prefix\e[91m$value\e[0m" ERROR_ALERT=1 elif [ "$level" == "WARN" ]; then _logger "$prefix\e[93m$value\e[0m" elif [ "$level" == "NOTICE" ]; then _logger "$prefix$value" elif [ "$level" == "DEBUG" ]; then if [ "$_DEBUG" == "yes" ]; then _logger "$prefix$value" fi else _logger "\e[41mLogger function called without proper loglevel.\e[0m" _logger "$prefix$value" fi } function TrapError { local job="$0" local line="$1" local code="${2:-1}" if [ $_SILENT -eq 0 ]; then echo -e " /!\ ERROR in ${job}: Near line ${line}, exit code ${code}" fi } function TrapStop { if [ $soft_stop -eq 0 ]; then Logger " /!\ WARNING: Manual exit of osync is really not recommended. Sync will be in inconsistent state." "WARN" Logger " /!\ WARNING: If you are sure, please hit CTRL+C another time to quit." "WARN" soft_stop=1 return 1 fi if [ $soft_stop -eq 1 ]; then Logger " /!\ WARNING: CTRL+C hit twice. Quitting osync. Please wait..." "WARN" soft_stop=2 exit 1 fi } function TrapQuit { if [ $error_alert -ne 0 ]; then if [ "$_DEBUG" != "yes" ]; then SendAlert else Logger "Debug mode, no alert mail will be sent." "NOTICE" fi UnlockDirectories CleanUp Logger "Osync finished with errors." "WARN" exitcode=1 else UnlockDirectories CleanUp Logger "Osync finished." "NOTICE" exitcode=0 fi if ps -p $child_pid > /dev/null 2>&1 then kill -9 $child_pid fi if ps -p $sub_pid > /dev/null 2>&1 then kill -9 $sub_pid fi exit $exitcode } function Spinner { if [ $_SILENT -eq 1 ]; then return 0 fi case $toggle in 1) echo -n " \ " echo -ne "\r" toggle="2" ;; 2) echo -n " | " echo -ne "\r" toggle="3" ;; 3) echo -n " / " echo -ne "\r" toggle="4" ;; *) echo -n " - " echo -ne "\r" toggle="1" ;; esac } function EscapeSpaces { local string="${1}" # String on which space will be escaped echo $(echo "$string" | sed 's/ /\\ /g') } function CleanUp { if [ "$_DEBUG" != "yes" ]; then rm -f $RUN_DIR/osync_*_$SCRIPT_PID fi } function SendAlert { if [ "$quick_sync" == "2" ]; then Logger "Current task is a quicksync task. Will not send any alert." "NOTICE" return 0 fi eval "cat \"$LOG_FILE\" $COMPRESSION_PROGRAM > $ALERT_LOG_FILE" MAIL_ALERT_MSG=$MAIL_ALERT_MSG$'\n\n'$(tail -n 25 "$LOG_FILE") if type -p mutt > /dev/null 2>&1 then echo $MAIL_ALERT_MSG | $(type -p mutt) -x -s "Sync alert for $SYNC_ID" $DESTINATION_MAILS -a "$ALERT_LOG_FILE" if [ $? != 0 ]; then Logger "WARNING: Cannot send alert email via $(type -p mutt) !!!" "WARN" else Logger "Sent alert mail using mutt." "NOTICE" fi elif type -p mail > /dev/null 2>&1 then echo $MAIL_ALERT_MSG | $(type -p mail) -a "$ALERT_LOG_FILE" -s "Sync alert for $SYNC_ID" $DESTINATION_MAILS if [ $? != 0 ]; then Logger "WARNING: Cannot send alert email via $(type -p mail) with attachments !!!" "WARN" echo $MAIL_ALERT_MSG | $(type -p mail) -s "Sync alert for $SYNC_ID" $DESTINATION_MAILS if [ $? != 0 ]; then Logger "WARNING: Cannot send alert email via $(type -p mail) without attachments !!!" "WARN" else Logger "Sent alert mail using mail command without attachment." "NOTICE" fi else Logger "Sent alert mail using mail command." "NOTICE" fi elif type -p sendemail > /dev/null 2>&1 then if [ "$SMTP_USER" != "" ] && [ "$SMTP_PASSWORD" != "" ]; then $SMTP_OPTIONS="-xu $SMTP_USER -xp $SMTP_PASSWORD" else $SMTP_OPTIONS="" fi $(type -p sendemail) -f $SENDER_MAIL -t $DESTINATION_MAILS -u "Backup alert for $BACKUP_ID" -m "$MAIL_ALERT_MSG" -s $SMTP_SERVER $SMTP_OPTIONS > /dev/null 2>&1 if [ $? != 0 ]; then Logger "WARNING: Cannot send alert email via $(type -p sendemail) !!!" "WARN" else Logger "Sent alert mail using sendemail command without attachment." "NOTICE" fi else Logger "WARNING: Cannot send alert email (no mutt / mail present) !!!" "WARN" return 1 fi if [ -f "$ALERT_LOG_FILE" ]; then rm "$ALERT_LOG_FILE" fi } function LoadConfigFile { local config_file="${1}" if [ ! -f "$config_file" ]; then Logger "Cannot load configuration file [$config_file]. Sync cannot start." "CRITICAL" exit 1 elif [[ "$1" != *".conf" ]]; then Logger "Wrong configuration file supplied [$config_file]. Sync cannot start." "CRITICAL" exit 1 else egrep '^#|^[^ ]*=[^;&]*' "$config_file" > "$RUN_DIR/osync_config_$SCRIPT_PID" source "$RUN_DIR/osync_config_$SCRIPT_PID" fi } function CheckEnvironment { if [ "$REMOTE_SYNC" == "yes" ]; then if ! type -p ssh > /dev/null 2>&1 then Logger "ssh not present. Cannot start sync." "CRITICAL" return 1 fi fi if ! type -p rsync > /dev/null 2>&1 then Logger "rsync not present. Sync cannot start." "CRITICAL" return 1 fi } function GetLocalOS { LOCAL_OS_VAR=$(uname -spio 2>&1) if [ $? != 0 ]; then LOCAL_OS_VAR=$(uname -v 2>&1) if [ $? != 0 ]; then LOCAL_OS_VAR=($uname) fi fi case $LOCAL_OS_VAR in *"Linux"*) LOCAL_OS="Linux" ;; *"BSD"*) LOCAL_OS="BSD" ;; *"MINGW32"*) LOCAL_OS="msys" ;; *"Darwin"*) LOCAL_OS="MacOSX" ;; *) Logger "Running on >> $LOCAL_OS_VAR << not supported. Please report to the author." "ERROR" exit 1 ;; esac Logger "Local OS: [$LOCAL_OS_VAR]." "DEBUG" } function GetRemoteOS { if [ "$REMOTE_SYNC" == "yes" ]; then CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost eval "$SSH_CMD \"uname -spio\" > $RUN_DIR/osync_remote_os_$SCRIPT_PID 2>&1" & child_pid=$! WaitForTaskCompletion $child_pid 120 240 retval=$? if [ $retval != 0 ]; then eval "$SSH_CMD \"uname -v\" > $RUN_DIR/osync_remote_os_$SCRIPT_PID 2>&1" & child_pid=$! WaitForTaskCompletion $child_pid 120 240 retval=$? if [ $retval != 0 ]; then eval "$SSH_CMD \"uname\" > $RUN_DIR/osync_remote_os_$SCRIPT_PID 2>&1" & child_pid=$! WaitForTaskCompletion $child_pid 120 240 retval=$? if [ $retval != 0 ]; then Logger "Cannot Get remote OS type." "ERROR" fi fi fi REMOTE_OS_VAR=$(cat $RUN_DIR/osync_remote_os_$SCRIPT_PID) case $REMOTE_OS_VAR in *"Linux"*) REMOTE_OS="Linux" ;; *"BSD"*) REMOTE_OS="BSD" ;; *"MINGW32"*) REMOTE_OS="msys" ;; *"Darwin"*) REMOTE_OS="MacOSX" ;; *"ssh"*|*"SSH"*) Logger "Cannot connect to remote system." "CRITICAL" exit 1 ;; *) Logger "Running on remote OS failed. Please report to the author if the OS is not supported." "CRITICAL" Logger "Remote OS said:\n$REMOTE_OS_VAR" "CRITICAL" exit 1 esac Logger "Remote OS: [$REMOTE_OS_VAR]." "DEBUG" fi } function WaitForTaskCompletion { local pid="${1}" # pid to wait for local soft_max_time="${2}" # If program with pid $pid takes longer than $soft_max_time seconds, will log a warning, unless $soft_max_time equals 0. local hard_max_time="${3}" # If program with pid $pid takes longer than $hard_max_time seconds, will stop execution, unless $hard_max_time equals 0. __CheckArguments 3 $# $FUNCNAME "$*" local soft_alert=0 # Does a soft alert need to be triggered local log_ttime=0 # local time instance for comparaison local seconds_begin=$SECONDS # Seconds since the beginning of the script local exec_time=0 # Seconds since the beginning of this function while eval "$PROCESS_TEST_CMD" > /dev/null do Spinner exec_time=$(($SECONDS - $seconds_begin)) if [ $((($exec_time + 1) % $KEEP_LOGGING)) -eq 0 ]; then if [ $log_ttime -ne $exec_time ]; then log_ttime=$exec_time Logger "Current task still running." "NOTICE" fi fi if [ $exec_time -gt $soft_max_time ]; then if [ $soft_alert -eq 0 ] && [ $soft_max_time -ne 0 ]; then Logger "Max soft execution time exceeded for task." "WARN" soft_alert=1 fi if [ $exec_time -gt $hard_max_time ] && [ $hard_max_time -ne 0 ]; then Logger "Max hard execution time exceeded for task. Stopping task execution." "ERROR" kill -s SIGTERM $pid if [ $? == 0 ]; then Logger "Task stopped succesfully" "NOTICE" else Logger "Sending SIGTERM to proces failed. Trying the hard way." "ERROR" kill -9 $pid if [ $? != 0 ]; then Logger "Could not stop task." "ERROR" fi fi return 1 fi fi sleep $SLEEP_TIME done wait $pid return $? } function WaitForCompletion { local pid="${1}" # pid to wait for local soft_max_time="${2}" # If program with pid $pid takes longer than $soft_max_time seconds, will log a warning, unless $soft_max_time equals 0. local hard_max_time="${3}" # If program with pid $pid takes longer than $hard_max_time seconds, will stop execution, unless $hard_max_time equals 0. __CheckArguments 3 $# $FUNCNAME "$*" local soft_alert=0 # Does a soft alert need to be triggered local log_ttime=0 # local time instance for comparaison local seconds_begin=$SECONDS # Seconds since the beginning of the script local exec_time=0 # Seconds since the beginning of this function while eval "$PROCESS_TEST_CMD" > /dev/null do Spinner if [ $((($SECONDS + 1) % $KEEP_LOGGING)) -eq 0 ]; then if [ $log_time -ne $SECONDS ]; then log_time=$SECONDS Logger "Current task still running." "NOTICE" fi fi if [ $SECONDS -gt $soft_max_time ]; then if [ $soft_alert -eq 0 ] && [ $soft_max_time != 0 ]; then Logger "Max soft execution time exceeded for script." "WARN" soft_alert=1 fi if [ $SECONDS -gt $hard_max_time ] && [ $hard_max_time != 0 ]; then Logger "Max hard execution time exceeded for script. Stopping current task execution." "ERROR" kill -s SIGTERM $pid if [ $? == 0 ]; then Logger "Task stopped succesfully" "NOTICE" else Logger "Sending SIGTERM to proces failed. Trying the hard way." "ERROR" kill -9 $pid if [ $? != 0 ]; then Logger "Could not stop task." "ERROR" fi fi return 1 fi fi sleep $SLEEP_TIME done wait $pid return $? } function RunLocalCommand { local command="${1}" # Command to run local hard_max_time="${2}" # Max time to wait for command to compleet __CheckArguments 2 $# $FUNCNAME "$*" if [ $_DRYRUN -ne 0 ]; then Logger "Dryrun: Local command [$command] not run." "NOTICE" return 1 fi Logger "Running command [$command] on local host." "NOTICE" eval "$command" > $RUN_DIR/osync_run_local_$SCRIPT_PID 2>&1 & child_pid=$! WaitForTaskCompletion $child_pid 0 $hard_max_time retval=$? if [ $retval -eq 0 ]; then Logger "Command succeded." "NOTICE" else Logger "Command failed." "ERROR" fi if [ $_VERBOSE -eq 1 ] || [ $retval -ne 0 ]; then Logger "Command output:\n$(cat $RUN_DIR/osync_run_local_$SCRIPT_PID)" "NOTICE" fi if [ "$STOP_ON_CMD_ERROR" == "yes" ] && [ $retval -ne 0 ]; then Logger "Stopping on command execution error." "CRITICAL" exit 1 fi } ## Runs remote command $1 and waits for completition in $2 seconds function RunRemoteCommand { local command="${1}" # Command to run local hard_max_time="${2}" # Max time to wait for command to compleet __CheckArguments 2 $# $FUNCNAME "$*" CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost if [ $_DRYRUN -ne 0 ]; then Logger "Dryrun: Local command [$command] not run." "NOTICE" return 1 fi Logger "Running command [$command] on remote host." "NOTICE" eval "$SSH_CMD \"$command\" > $RUN_DIR/osync_run_remote_$SCRIPT_PID 2>&1 &" child_pid=$! WaitForTaskCompletion $child_pid 0 $hard_max_time retval=$? if [ $retval -eq 0 ]; then Logger "Command succeded." "NOTICE" else Logger "Command failed." "ERROR" fi if [ -f $RUN_DIR/osync_run_remote_$SCRIPT_PID ] && ([ $_VERBOSE -eq 1 ] || [ $retval -ne 0 ]) then Logger "Command output:\n$(cat $RUN_DIR/osync_run_remote_$SCRIPT_PID)" "NOTICE" fi if [ "$STOP_ON_CMD_ERROR" == "yes" ] && [ $retval -ne 0 ]; then Logger "Stopping on command execution error." "CRITICAL" exit 1 fi } function RunBeforeHook { if [ "$LOCAL_RUN_BEFORE_CMD" != "" ]; then RunLocalCommand "$LOCAL_RUN_BEFORE_CMD" $MAX_EXEC_TIME_PER_CMD_BEFORE fi if [ "$REMOTE_RUN_BEFORE_CMD" != "" ]; then RunRemoteCommand "$REMOTE_RUN_BEFORE_CMD" $MAX_EXEC_TIME_PER_CMD_BEFORE fi } function RunAfterHook { if [ "$LOCAL_RUN_AFTER_CMD" != "" ]; then RunLocalCommand "$LOCAL_RUN_AFTER_CMD" $MAX_EXEC_TIME_PER_CMD_AFTER fi if [ "$REMOTE_RUN_AFTER_CMD" != "" ]; then RunRemoteCommand "$REMOTE_RUN_AFTER_CMD" $MAX_EXEC_TIME_PER_CMD_AFTER fi } function CheckConnectivityRemoteHost { if [ "$REMOTE_HOST_PING" != "no" ] && [ "$REMOTE_SYNC" != "no" ]; then eval "$PING_CMD $REMOTE_HOST > /dev/null 2>&1" if [ $? != 0 ]; then Logger "Cannot ping $REMOTE_HOST" "CRITICAL" exit 1 fi fi } function CheckConnectivity3rdPartyHosts { if [ "$REMOTE_3RD_PARTY_HOSTS" != "" ]; then remote_3rd_party_success=0 OLD_IFS=$IFS IFS=$' \t\n' for i in $REMOTE_3RD_PARTY_HOSTS do eval "$PING_CMD $i > /dev/null 2>&1" if [ $? != 0 ]; then Logger "Cannot ping 3rd party host $i" "WARN" else remote_3rd_party_success=1 fi done IFS=$OLD_IFS if [ $remote_3rd_party_success -ne 1 ]; then Logger "No remote 3rd party host responded to ping. No internet ?" "CRITICAL" exit 1 fi fi } function __CheckArguments { # Checks the number of arguments and raises an error if some are missing if [ "$_DEBUG" == "yes" ]; then local number_of_arguments="${1}" # Number of arguments a function should have local number_of_given_arguments="${2}" # Number of arguments that have been passed local function_name="${3}" # Function name that called __CheckArguments local arguments="${4}" # All other arguments if [ $number_of_arguments -ne $number_of_given_arguments ]; then Logger "Inconsistnent number of arguments in $function_name. Should have $number_of_arguments arguments, has $number_of_given_arguments arguments, see log file." "CRITICAL" # Cannot user Logger here because $@ is a list of arguments echo "Argumnt list: $4" >> "$LOG_FILE" fi if [ "$_PARANOIA_DEBUG" == "yes" ]; then # Paranoia check... Can help finding empty arguments local count=-3 # Number of arguments minus the function calls for __CheckArguments for i in $@; do count=$((count + 1)) done if [ $count -ne $1 ]; then Logger "Function $function_name may have inconsistent number of arguments. Expected: $number_of_arguments, count: $count, see log file." "WARN" echo "Argument list (including checks): $@" >> "$LOG_FILE" fi fi fi } ############################################################################################ ### realpath.sh implementation from https://github.com/mkropat/sh-realpath realpath() { canonicalize_path "$(resolve_symlinks "$1")" } resolve_symlinks() { _resolve_symlinks "$1" } _resolve_symlinks() { _assert_no_path_cycles "$@" || return local dir_context path path=$(readlink -- "$1") if [ $? -eq 0 ]; then dir_context=$(dirname -- "$1") _resolve_symlinks "$(_prepend_dir_context_if_necessary "$dir_context" "$path")" "$@" else printf '%s\n' "$1" fi } _prepend_dir_context_if_necessary() { if [ "$1" = . ]; then printf '%s\n' "$2" else _prepend_path_if_relative "$1" "$2" fi } _prepend_path_if_relative() { case "$2" in /* ) printf '%s\n' "$2" ;; * ) printf '%s\n' "$1/$2" ;; esac } _assert_no_path_cycles() { local target path target=$1 shift for path in "$@"; do if [ "$path" = "$target" ]; then return 1 fi done } canonicalize_path() { if [ -d "$1" ]; then _canonicalize_dir_path "$1" else _canonicalize_file_path "$1" fi } _canonicalize_dir_path() { (cd "$1" 2>/dev/null && pwd -P) } _canonicalize_file_path() { local dir file dir=$(dirname -- "$1") file=$(basename -- "$1") (cd "$dir" 2>/dev/null && printf '%s/%s\n' "$(pwd -P)" "$file") } # Optionally, you may also want to include: ### readlink emulation ### readlink() { if _has_command readlink; then _system_readlink "$@" else _emulated_readlink "$@" fi } _has_command() { hash -- "$1" 2>/dev/null } _system_readlink() { command readlink "$@" } _emulated_readlink() { if [ "$1" = -- ]; then shift fi _gnu_stat_readlink "$@" || _bsd_stat_readlink "$@" } _gnu_stat_readlink() { local output output=$(stat -c %N -- "$1" 2>/dev/null) && printf '%s\n' "$output" | sed "s/^‘[^’]*’ -> ‘\(.*\)’/\1/ s/^'[^']*' -> '\(.*\)'/\1/" # FIXME: handle newlines } _bsd_stat_readlink() { stat -f %Y -- "$1" 2>/dev/null } #### Osync specific functions (non shared) function CreateOsyncDirs { if ! [ -d "$MASTER_STATE_DIR" ]; then mkdir -p "$MASTER_STATE_DIR" if [ $? != 0 ]; then Logger "Cannot create master replica state dir [$MASTER_STATE_DIR]." "CRITICAL" exit 1 fi fi if [ "$REMOTE_SYNC" == "yes" ]; then CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost eval "$SSH_CMD \"if ! [ -d \\\"$SLAVE_STATE_DIR\\\" ]; then $COMMAND_SUDO mkdir -p \\\"$SLAVE_STATE_DIR\\\"; fi 2>&1\"" & child_pid=$! WaitForTaskCompletion $child_pid 0 1800 else if ! [ -d "$SLAVE_STATE_DIR" ]; then mkdir -p "$SLAVE_STATE_DIR" > $RUN_DIR/osync_createosyncdirs_$SCRIPT_PID 2>&1 fi fi if [ $? != 0 ]; then Logger "Cannot create slave replica state dir [$SLAVE_STATE_DIR]." "CRITICAL" Logger "Command output:\n$(cat $RUN_DIR/osync_createosyncdirs_$SCRIPT_PID)" "NOTICE" exit 1 fi } function CheckMasterSlaveDirs { #MASTER_SYNC_DIR_CANN=$(realpath "$MASTER_SYNC_DIR") #TODO: investigate realpath & readlink issues on MSYS and busybox here #SLAVE_SYNC_DIR_CANN=$(realpath "$SLAVE_SYNC_DIR") #if [ "$REMOTE_SYNC" != "yes" ]; then # if [ "$MASTER_SYNC_DIR_CANN" == "$SLAVE_SYNC_DIR_CANN" ]; then # Logger "Master directory [$MASTER_SYNC_DIR] can't be the same as slave directory." "CRITICAL" # exit 1 # fi #fi if ! [ -d "$MASTER_SYNC_DIR" ]; then if [ "$CREATE_DIRS" == "yes" ]; then mkdir -p "$MASTER_SYNC_DIR" > $RUN_DIR/osync_checkmasterslavedirs_$SCRIPT_PID 2>&1 if [ $? != 0 ]; then Logger "Cannot create master directory [$MASTER_SYNC_DIR]." "CRITICAL" Logger "Command output:\n$(cat $RUN_DIR/osync_checkmasterslavedirs_$SCRIPT_PID)" "NOTICE" exit 1 fi else Logger "Master directory [$MASTER_SYNC_DIR] does not exist." "CRITICAL" exit 1 fi fi if [ "$REMOTE_SYNC" == "yes" ]; then CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost if [ "$CREATE_DIRS" == "yes" ]; then eval "$SSH_CMD \"if ! [ -d \\\"$SLAVE_SYNC_DIR\\\" ]; then $COMMAND_SUDO mkdir -p \\\"$SLAVE_SYNC_DIR\\\"; fi 2>&1"\" > $RUN_DIR/osync_checkmasterslavedirs_$SCRIPT_PID & child_pid=$! WaitForTaskCompletion $child_pid 0 1800 if [ $? != 0 ]; then Logger "Cannot create slave directory [$SLAVE_SYNC_DIR]." "CRITICAL" Logger "Command output:\n$(cat $RUN_DIR/osync_checkmasterslavedirs_$SCRIPT_PID)" "NOTICE" exit 1 fi else eval "$SSH_CMD \"if ! [ -d \\\"$SLAVE_SYNC_DIR\\\" ]; then exit 1; fi"\" & child_pid=$! WaitForTaskCompletion $child_pid 0 1800 res=$? if [ $res != 0 ]; then Logger "Slave directory [$SLAVE_SYNC_DIR] does not exist." "CRITICAL" exit 1 fi fi else if [ ! -d "$SLAVE_SYNC_DIR" ]; then if [ "$CREATE_DIRS" == "yes" ]; then mkdir -p "$SLAVE_SYNC_DIR" if [ $? != 0 ]; then Logger "Cannot create slave directory [$SLAVE_SYNC_DIR]." "CRITICAL" exit 1 else Logger "Created slave directory [$SLAVE_SYNC_DIR]." "NOTICE" fi else Logger "Slave directory [$SLAVE_SYNC_DIR] does not exist." "CRITICAL" exit 1 fi fi fi } function CheckMinimumSpace { Logger "Checking minimum disk space on master and slave." "NOTICE" MASTER_SPACE=$(df -P "$MASTER_SYNC_DIR" | tail -1 | awk '{print $4}') if [ $MASTER_SPACE -lt $MINIMUM_SPACE ]; then Logger "There is not enough free space on master [$MASTER_SPACE KB]." "ERROR" fi if [ "$REMOTE_SYNC" == "yes" ]; then CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost eval "$SSH_CMD \"$COMMAND_SUDO df -P \\\"$SLAVE_SYNC_DIR\\\"\"" > $RUN_DIR/osync_slave_space_$SCRIPT_PID & child_pid=$! WaitForTaskCompletion $child_pid 0 1800 SLAVE_SPACE=$(cat $RUN_DIR/osync_slave_space_$SCRIPT_PID | tail -1 | awk '{print $4}') else SLAVE_SPACE=$(df -P "$SLAVE_SYNC_DIR" | tail -1 | awk '{print $4}') fi if [ $SLAVE_SPACE -lt $MINIMUM_SPACE ]; then Logger "There is not enough free space on slave [$SLAVE_SPACE KB]." "ERROR" fi } function RsyncExcludePattern { # Disable globbing so wildcards from exclusions don't get expanded set -f rest="$RSYNC_EXCLUDE_PATTERN" while [ -n "$rest" ] do # Take the string until first occurence until $PATH_SEPARATOR_CHAR str=${rest%%;*} # Handle the last case if [ "$rest" = "${rest/$PATH_SEPARATOR_CHAR/}" ]; then rest= else # Cut everything before the first occurence of $PATH_SEPARATOR_CHAR rest=${rest#*$PATH_SEPARATOR_CHAR} fi if [ "$RSYNC_EXCLUDE" == "" ]; then RSYNC_EXCLUDE="--exclude=\"$str\"" else RSYNC_EXCLUDE="$RSYNC_EXCLUDE --exclude=\"$str\"" fi done set +f } function RsyncExcludeFrom { if [ ! "$RSYNC_EXCLUDE_FROM" == "" ]; then ## Check if the exclude list has a full path, and if not, add the config file path if there is one if [ "$(basename $RSYNC_EXCLUDE_FROM)" == "$RSYNC_EXCLUDE_FROM" ]; then RSYNC_EXCLUDE_FROM=$(dirname $ConfigFile)/$RSYNC_EXCLUDE_FROM fi if [ -e "$RSYNC_EXCLUDE_FROM" ]; then RSYNC_EXCLUDE="$RSYNC_EXCLUDE --exclude-from=\"$RSYNC_EXCLUDE_FROM\"" fi fi } function WriteLockFiles { echo $SCRIPT_PID > "$MASTER_LOCK" if [ $? != 0 ]; then Logger "Could not set lock on master replica." "CRITICAL" exit 1 else Logger "Locked master replica." "NOTICE" fi if [ "$REMOTE_SYNC" == "yes" ]; then CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost eval "$SSH_CMD \"echo $SCRIPT_PID@$SYNC_ID | $COMMAND_SUDO tee \\\"$SLAVE_LOCK\\\" > /dev/null \"" & child_pid=$! WaitForTaskCompletion $child_pid 0 1800 if [ $? != 0 ]; then Logger "Could not set lock on remote slave replica." "CRITICAL" exit 1 else Logger "Locked remote slave replica." "NOTICE" fi else echo "$SCRIPT_PID@$SYNC_ID" > "$SLAVE_LOCK" if [ $? != 0 ]; then Logger "Couuld not set lock on local slave replica." "CRITICAL" exit 1 else Logger "Locked local slave replica." "NOTICE" fi fi } function LockDirectories { if [ $_NOLOCKS -eq 1 ]; then return 0 fi if [ $force_unlock -eq 1 ]; then WriteLockFiles if [ $? != 0 ]; then exit 1 fi fi Logger "Checking for replica locks." "NOTICE" if [ -f "$MASTER_LOCK" ]; then master_lock_pid=$(cat $MASTER_LOCK) Logger "Master lock pid present: $master_lock_pid" "DEBUG" ps -p$master_lock_pid > /dev/null 2>&1 if [ $? != 0 ]; then Logger "There is a dead osync lock on master. Instance $master_lock_pid no longer running. Resuming." "NOTICE" else Logger "There is already a local instance of osync that locks master replica. Cannot start. If your are sure this is an error, plaese kill instance $master_lock_pid of osync." "CRITICAL" exit 1 fi fi if [ "$REMOTE_SYNC" == "yes" ]; then CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost eval "$SSH_CMD \"if [ -f \\\"$SLAVE_LOCK\\\" ]; then cat \\\"$SLAVE_LOCK\\\"; fi\" > $RUN_DIR/osync_remote_slave_lock_$SCRIPT_PID" & child_pid=$! WaitForTaskCompletion $child_pid 0 1800 if [ -f $RUN_DIR/osync_remote_slave_lock_$SCRIPT_PID ]; then slave_lock_pid=$(cat $RUN_DIR/osync_remote_slave_lock_$SCRIPT_PID | cut -d'@' -f1) slave_lock_id=$(cat $RUN_DIR/osync_remote_slave_lock_$SCRIPT_PID | cut -d'@' -f2) fi else if [ -f "$SLAVE_LOCK" ]; then slave_lock_pid=$(cat "$SLAVE_LOCK" | cut -d'@' -f1) slave_lock_id=$(cat "$SLAVE_LOCK" | cut -d'@' -f2) fi fi if [ "$slave_lock_pid" != "" ] && [ "$slave_lock_id" != "" ]; then Logger "Slave lock pid: $slave_lock_pid" "DEBUG" ps -p$slave_lock_pid > /dev/null if [ $? != 0 ]; then if [ "$slave_lock_id" == "$SYNC_ID" ]; then Logger "There is a dead osync lock on slave replica that corresponds to this master sync-id. Instance $slave_lock_pid no longer running. Resuming." "NOTICE" else if [ "$FORCE_STRANGER_LOCK_RESUME" == "yes" ]; then Logger "WARNING: There is a dead osync lock on slave replica that does not correspond to this master sync-id. Forcing resume." "WARN" else Logger "There is a dead osync lock on slave replica that does not correspond to this master sync-id. Will not resume." "CRITICAL" exit 1 fi fi else Logger "There is already a local instance of osync that locks slave replica. Cannot start. If you are sure this is an error, please kill instance $slave_lock_pid of osync." "CRITICAL" exit 1 fi fi WriteLockFiles } function UnlockDirectories { if [ $_NOLOCKS -eq 1 ]; then return 0 fi if [ "$REMOTE_SYNC" == "yes" ]; then CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost eval "$SSH_CMD \"if [ -f \\\"$SLAVE_LOCK\\\" ]; then $COMMAND_SUDO rm \\\"$SLAVE_LOCK\\\"; fi 2>&1\"" > $RUN_DIR/osync_UnlockDirectories_$SCRIPT_PID & child_pid=$! WaitForTaskCompletion $child_pid 0 1800 else if [ -f "$SLAVE_LOCK" ]; then rm "$SLAVE_LOCK" > $RUN_DIR/osync_UnlockDirectories_$SCRIPT_PID 2>&1 fi fi if [ $? != 0 ]; then Logger "Could not unlock slave replica." "ERROR" Logger "Command Output:\n$(cat $RUN_DIR/osync_UnlockDirectories_$SCRIPT_PID)" "NOTICE" else Logger "Removed slave replica lock." "NOTICE" fi if [ -f "$MASTER_LOCK" ]; then rm "$MASTER_LOCK" if [ $? != 0 ]; then Logger "Could not unlock master replica." "ERROR" else Logger "Removed master replica lock." "NOTICE" fi fi } ###### Sync core functions ## Rsync does not like spaces in directory names, considering it as two different directories. Handling this schema by escaping space. ## It seems this only happens when trying to execute an rsync command through eval $rsync_cmd on a remote host. ## So i'm using unescaped $MASTER_SYNC_DIR for local rsync calls and escaped $ESC_MASTER_SYNC_DIR for remote rsync calls like user@host:$ESC_MASTER_SYNC_DIR ## The same applies for slave sync dir..............................................T.H.I.S..I.S..A..P.R.O.G.R.A.M.M.I.N.G..N.I.G.H.T.M.A.R.E function tree_list { local replica_path="${1}" # path to the replica for which a tree needs to be constructed local replica_type="${2}" # replica type: master, slave local tree_filename="${3}" # filename to output tree (will be prefixed with $replica_type) __CheckArguments 3 "$#" "$FUNCNAME" "$*" local escaped_replica_path=$(EscapeSpaces "$replica_path") #TODO: See if escpaed still needed when using ' instead of " for command eval Logger "Creating $replica_type replica file list [$replica_path]." "NOTICE" if [ "$REMOTE_SYNC" == "yes" ] && [ "$replica_type" == "slave" ]; then CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost rsync_cmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"$RSYNC_PATH\" $RSYNC_ARGS -8 --exclude \"$OSYNC_DIR\" $RSYNC_EXCLUDE -e \"$RSYNC_SSH_CMD\" --list-only $REMOTE_USER@$REMOTE_HOST:\"$escaped_replica_path/\" | grep \"^-\|^d\" | awk '{\$1=\$2=\$3=\$4=\"\" ;print}' | awk '{\$1=\$1 ;print}' | (grep -v \"^\.$\" || :) | sort > \"$RUN_DIR/osync_$replica_type_$SCRIPT_PID\" &" else rsync_cmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"$RSYNC_PATH\" $RSYNC_ARGS -8 --exclude \"$OSYNC_DIR\" $RSYNC_EXCLUDE --list-only \"$replica_path/\" | grep \"^-\|^d\" | awk '{\$1=\$2=\$3=\$4=\"\" ;print}' | awk '{\$1=\$1 ;print}' | (grep -v \"^\.$\" || :) | sort > \"$RUN_DIR/osync_$replica_type_$SCRIPT_PID\" &" fi Logger "RSYNC_CMD: $rsync_cmd" "DEBUG" ## Redirect commands stderr here to get rsync stderr output in logfile eval $rsync_cmd 2>> "$LOG_FILE" child_pid=$! WaitForCompletion $child_pid $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME retval=$? ## Retval 24 = some files vanished while creating list if ([ $retval == 0 ] || [ $retval == 24 ]) && [ -f $RUN_DIR/osync_$replica_type_$SCRIPT_PID ]; then mv $RUN_DIR/osync_$replica_type_$SCRIPT_PID "$MASTER_STATE_DIR/$replica_type$tree_filename" return $? else Logger "Cannot create replica file list." "CRITICAL" exit $retval fi } # delete_list(replica, tree-file-after, tree-file-current, deleted-list-file, deleted-failed-list-file): Creates a list of files vanished from last run on replica $1 (master/slave) function delete_list { local replica_type="${1}" # replica type: master, slave local tree_file_after="${2}" # tree-file-after, will be prefixed with replica type local tree_file_current="${3}" # tree-file-current, will be prefixed with replica type local deleted_list_file="${4}" # file containing deleted file list, will be prefixed with replica type local deleted_failed_list_file="${5}" # file containing files that couldn't be deleted on last run, will be prefixed with replica type __CheckArguments 5 "$#" "$FUNCNAME" "$*" # TODO: Check why external filenames are used (see _DRYRUN option because of NOSUFFIX) Logger "Creating $replica_type replica deleted file list." "NOTICE" if [ -f "$MASTER_STATE_DIR/$replica_type$TREE_AFTER_FILENAME_NO_SUFFIX" ]; then ## Same functionnality, comm is much faster than grep but is not available on every platform if type -p comm > /dev/null 2>&1 then cmd="comm -23 \"$MASTER_STATE_DIR/$replica_type$TREE_AFTER_FILENAME_NO_SUFFIX\" \"$MASTER_STATE_DIR/$replica_type$tree_file_current\" > \"$MASTER_STATE_DIR/$replica_type$deleted_list_file\"" else ## The || : forces the command to have a good result cmd="(grep -F -x -v -f \"$MASTER_STATE_DIR/$replica_type$tree_file_current\" \"$MASTER_STATE_DIR/$replica_type$TREE_AFTER_FILENAME_NO_SUFFIX\" || :) > \"$MASTER_STATE_DIR/$replica_type$deleted_list_file\"" fi Logger "CMD: $cmd" "DEBUG" eval $cmd 2>> "$LOG_FILE" retval=$? # Add delete failed file list to current delete list and then empty it if [ -f "$MASTER_STATE_DIR/$replica_type$deleted_failed_list_file" ]; then cat "$MASTER_STATE_DIR/$replica_type$deleted_failed_list_file" >> "$MASTER_STATE_DIR/$replica_type$deleted_list_file" rm -f "$MASTER_STATE_DIR/$replica_type$deleted_failed_list_file" fi return $retval else touch "$MASTER_STATE_DIR/$replica_type$deleted_list_file" return $retval fi } # sync_update(source replica, destination replica, delete_list_filename) function sync_update { local source_replica="${1}" # Contains replica type of source: master, slave local destination_replica="${2}" # Contains replica type of destination: master, slave local delete_list_filename="${3}" # Contains deleted list filename, will be prefixed with replica type __CheckArguments 3 "$#" "$FUNCNAME" "$*" Logger "Updating $destination_replica replica." "NOTICE" if [ "$source_replica" == "master" ]; then SOURCE_DIR="$MASTER_SYNC_DIR" ESC_SOURCE_DIR=$(EscapeSpaces "$MASTER_SYNC_DIR") DEST_DIR="$SLAVE_SYNC_DIR" ESC_DEST_DIR=$(EscapeSpaces "$SLAVE_SYNC_DIR") BACKUP_DIR="$SLAVE_BACKUP" else SOURCE_DIR="$SLAVE_SYNC_DIR" ESC_SOURCE_DIR=$(EscapeSpaces "$SLAVE_SYNC_DIR") DEST_DIR="$MASTER_SYNC_DIR" ESC_DEST_DIR=$(EscapeSpaces "$MASTER_SYNC_DIR") BACKUP_DIR="$MASTER_BACKUP" fi if [ "$REMOTE_SYNC" == "yes" ]; then CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost if [ "$source_replica" == "master" ]; then rsync_cmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"$RSYNC_PATH\" $RSYNC_ARGS $SYNC_OPTS -e \"$RSYNC_SSH_CMD\" $BACKUP_DIR --exclude \"$OSYNC_DIR\" $RSYNC_EXCLUDE --exclude-from=\"$MASTER_STATE_DIR/$source_replica$delete_list_filename\" --exclude-from=\"$MASTER_STATE_DIR/$destination_replica$delete_list_filename\" \"$SOURCE_DIR/\" $REMOTE_USER@$REMOTE_HOST:\"$ESC_DEST_DIR/\" > $RUN_DIR/osync_update_$destination_replica_replica_$SCRIPT_PID 2>&1 &" else rsync_cmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"$RSYNC_PATH\" $RSYNC_ARGS $SYNC_OPTS -e \"$RSYNC_SSH_CMD\" $BACKUP_DIR --exclude \"$OSYNC_DIR\" $RSYNC_EXCLUDE --exclude-from=\"$MASTER_STATE_DIR/$destination_replica$delete_list_filename\" --exclude-from=\"$MASTER_STATE_DIR/$source_replica$delete_list_filename\" $REMOTE_USER@$REMOTE_HOST:\"$ESC_SOURCE_DIR/\" \"$DEST_DIR/\" > $RUN_DIR/osync_update_$destination_replica_replica_$SCRIPT_PID 2>&1 &" fi else rsync_cmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"$RSYNC_PATH\" $RSYNC_ARGS $SYNC_OPTS $BACKUP_DIR --exclude \"$OSYNC_DIR\" $RSYNC_EXCLUDE --exclude-from=\"$MASTER_STATE_DIR/$source_replica$delete_list_filename\" --exclude-from=\"$MASTER_STATE_DIR/$destination_replica$delete_list_filename\" \"$SOURCE_DIR/\" \"$DEST_DIR/\" > $RUN_DIR/osync_update_$destination_replica_replica_$SCRIPT_PID 2>&1 &" fi Logger "RSYNC_CMD: $rsync_cmd" "DEBUG" eval "$rsync_cmd" child_pid=$! WaitForCompletion $child_pid $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME retval=$? if [ $_VERBOSE -eq 1 ] && [ -f $RUN_DIR/osync_update_$destination_replica_replica_$SCRIPT_PID ]; then Logger "List:\n$(cat $RUN_DIR/osync_update_$destination_replica_replica_$SCRIPT_PID)" "NOTICE" fi if [ $retval != 0 ] && [ $retval != 24 ]; then Logger "Updating $destination_replica replica failed. Stopping execution." "CRITICAL" if [ $_VERBOSE -eq 0 ] && [ -f $RUN_DIR/osync_update_$destination_replica_replica_$SCRIPT_PID ]; then Logger "Rsync output:\n$(cat $RUN_DIR/osync_update_$destination_replica_replica_$SCRIPT_PID)" "NOTICE" fi exit $retval else Logger "Updating $destination_replica replica succeded." "NOTICE" return 0 fi } # delete_local(replica dir, delete file list, delete dir, delete failed file) function _delete_local { local replica_dir="${1}" # Full path to replica local deleted_list_file="${2}" # file containing deleted file list, will be prefixed with replica type local deletion_dir="${3}" # deletion dir in format .[workdir]/deleted local deleted_failed_list_file="${4}" # file containing files that couldn't be deleted on last run, will be prefixed with replica type __CheckArguments 4 "$#" "$FUNCNAME" "$*" ## On every run, check wheter the next item is already deleted because it's included in a directory already deleted previous_file="" OLD_IFS=$IFS IFS=$'\r\n' for files in $(cat "$MASTER_STATE_DIR/$deleted_list_file") do if [[ "$files" != "$previous_file/"* ]] && [ "$files" != "" ]; then if [ "$SOFT_DELETE" != "no" ]; then if [ ! -d "$replica_dir$deletion_dir" ]; then mkdir -p "$replica_dir$deletion_dir" if [ $? != 0 ]; then Logger "Cannot create replica deletion directory." "ERROR" fi fi if [ $_VERBOSE -eq 1 ]; then Logger "Soft deleting $replica_dir$files" "NOTICE" fi if [ $_DRYRUN -ne 1 ]; then if [ -e "$replica_dir$deletion_dir/$files" ]; then rm -rf "$replica_dir$deletion_dir/$files" fi # In order to keep full path on soft deletion, create parent directories before move parentdir="$(dirname "$files")" if [ "$parentdir" != "." ]; then mkdir --parents "$replica_dir$deletion_dir/$parentdir" mv -f "$replica_dir$files" "$replica_dir$deletion_dir/$parentdir" else mv -f "$replica_dir$files" "$replica_dir$deletion_dir" fi if [ $? != 0 ]; then Logger "Cannot move $replica_dir$files to deletion directory." "ERROR" echo "$files" >> "$MASTER_STATE_DIR/$deleted_failed_list_file" fi fi else if [ $_VERBOSE -eq 1 ]; then Logger "Deleting $replica_dir$files" "NOTICE" fi if [ $_DRYRUN -ne 1 ]; then rm -rf "$replica_dir$files" if [ $? != 0 ]; then Logger "Cannot delete $replica_dir$files" "ERROR" echo "$files" >> "$MASTER_STATE_DIR/$deleted_failed_list_file" fi fi fi previous_file="$files" fi done IFS=$OLD_IFS } function _delete_remote { local replica_dir="${1}" # Full path to replica local deleted_list_file="${2}" # file containing deleted file list, will be prefixed with replica type local deletion_dir="${3}" # deletion dir in format .[workdir]/deleted local deleted_failed_list_file="${4}" # file containing files that couldn't be deleted on last run, will be prefixed with replica type __CheckArguments 4 "$#" "$FUNCNAME" "$*" ## This is a special coded function. Need to redelcare local functions on remote host, passing all needed variables as escaped arguments to ssh command. ## Anything beetween << ENDSSH and ENDSSH will be executed remotely # Additionnaly, we need to copy the deletetion list to the remote state folder ESC_DEST_DIR="$(EscapeSpaces "$SLAVE_STATE_DIR")" rsync_cmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"$RSYNC_PATH\" $SYNC_OPTS -e \"$RSYNC_SSH_CMD\" \"$MASTER_STATE_DIR/$2\" $REMOTE_USER@$REMOTE_HOST:\"$ESC_DEST_DIR/\" > $RUN_DIR/osync_remote_deletion_list_copy_$SCRIPT_PID 2>&1" Logger "RSYNC_CMD: $rsync_cmd" "DEBUG" eval $rsync_cmd 2>> "$LOG_FILE" if [ $? != 0 ]; then Logger "Cannot copy the deletion list to remote replica." "CRITICAL" if [ -f $RUN_DIR/osync_remote_deletion_list_copy_$SCRIPT_PID ]; then Logger "$(cat $RUN_DIR/osync_remote_deletion_list_copy_$SCRIPT_PID)" "CRITICAL" #TODO: remote deletion is critical. local deletion isn't. What to do ? fi exit 1 fi $SSH_CMD error_alert=0 sync_on_changes=$sync_on_changes _SILENT=$_SILENT _DEBUG=$_DEBUG _DRYRUN=$_DRYRUN _VERBOSE=$_VERBOSE COMMAND_SUDO=$COMMAND_SUDO FILE_LIST="$(EscapeSpaces "$SLAVE_STATE_DIR/$deleted_list_file")" REPLICA_DIR="$(EscapeSpaces "$replica_dir")" DELETE_DIR="$(EscapeSpaces "$deletion_dir")" FAILED_DELETE_LIST="$(EscapeSpaces "$SLAVE_STATE_DIR/$deleted_failed_list_file")" 'bash -s' << 'ENDSSH' > $RUN_DIR/osync_remote_deletion_$SCRIPT_PID 2>&1 & ## The following lines are executed remotely function _logger { local value="${1}" # What to log echo -e "$value" >> "$LOG_FILE" if [ $_SILENT -eq 0 ]; then echo -e "$value" fi } function Logger { local value="${1}" # What to log local level="${2}" # Log level: DEBUG, NOTICE, WARN, ERROR, CRITIAL # Special case in daemon mode we should timestamp instead of counting seconds if [ $sync_on_changes -eq 1 ]; then prefix="$(date) - " else prefix="RTIME: $SECONDS - " fi if [ "$level" == "CRITICAL" ]; then _logger "$prefix\e[41m$value\e[0m" ERROR_ALERT=1 elif [ "$level" == "ERROR" ]; then _logger "$prefix\e[91m$value\e[0m" ERROR_ALERT=1 elif [ "$level" == "WARN" ]; then _logger "$prefix\e[93m$value\e[0m" elif [ "$level" == "NOTICE" ]; then _logger "$prefix$value" elif [ "$level" == "DEBUG" ]; then if [ "$_DEBUG" == "yes" ]; then _logger "$prefix$value" fi else _logger "\e[41mLogger function called without proper loglevel.\e[0m" _logger "$prefix$value" fi } ## Empty earlier failed delete list > "$FAILED_DELETE_LIST" ## On every run, check wheter the next item is already deleted because it's included in a directory already deleted previous_file="" OLD_IFS=$IFS IFS=$'\r\n' for files in $(cat "$FILE_LIST") do if [[ "$files" != "$previous_file/"* ]] && [ "$files" != "" ]; then if [ ! -d "$REPLICA_DIR$DELETE_DIR" ]; then $COMMAND_SUDO mkdir -p "$REPLICA_DIR$DELETE_DIR" if [ $? != 0 ]; then Logger "Cannot create replica deletion directory." "ERROR" fi fi if [ "$SOFT_DELETE" != "no" ]; then if [ $_VERBOSE -eq 1 ]; then Logger "Soft deleting $REPLICA_DIR$files" "NOTICE" fi if [ $_DRYRUN -ne 1 ]; then if [ -e "$REPLICA_DIR$DELETE_DIR/$files" ]; then $COMMAND_SUDO rm -rf "$REPLICA_DIR$DELETE_DIR/$files" fi # In order to keep full path on soft deletion, create parent directories before move parentdir="$(dirname "$files")" if [ "$parentdir" != "." ]; then $COMMAND_SUDO mkdir --parents "$REPLICA_DIR$DELETE_DIR/$parentdir" $COMMAND_SUDO mv -f "$REPLICA_DIR$files" "$REPLICA_DIR$DELETE_DIR/$parentdir" else $COMMAND_SUDO mv -f "$REPLICA_DIR$files" "$REPLICA_DIR$DELETE_DIR" fi if [ $? != 0 ]; then Logger "Cannot move $REPLICA_DIR$files to deletion directory." "ERROR" echo "$files" >> "$FAILED_DELETE_LIST" fi fi else if [ $_VERBOSE -eq 1 ]; then Logger "Deleting $REPLICA_DIR$files" "NOTICE" fi if [ $_DRYRUN -ne 1 ]; then $COMMAND_SUDO rm -rf "$REPLICA_DIR$files" if [ $? != 0 ]; then Logger "Cannot delete $REPLICA_DIR$files" "ERROR" echo "$files" >> "$SLAVE_STATE_DIR/$FAILED_DELETE_LIST" fi fi fi previous_file="$files" fi done IFS=$OLD_IFS ENDSSH ## Need to add a trivial sleep time to give ssh time to log to local file sleep 5 ## Copy back the deleted failed file list ESC_SOURCE_FILE="$(EscapeSpaces "$SLAVE_STATE_DIR/$deleted_failed_list_file")" rsync_cmd="$(type -p $RSYNC_EXECUTABLE) --rsync-path=\"$RSYNC_PATH\" $SYNC_OPTS -e \"$RSYNC_SSH_CMD\" $REMOTE_USER@$REMOTE_HOST:\"$ESC_SOURCE_FILE\" \"$MASTER_STATE_DIR\" > $RUN_DIR/osync_remote_failed_deletion_list_copy_$SCRIPT_PID" Logger "RSYNC_CMD: $rsync_cmd" "DEBUG" eval $rsync_cmd 2>> "$LOG_FILE" if [ $? != 0 ]; then Logger "Cannot copy back the failed deletion list to master replica." "CRITICAL" if [ -f $RUN_DIR/osync_remote_failed_deletion_list_copy_$SCRIPT_PID ]; then Logger "$(cat $RUN_DIR/osync_remote_failed_deletion_list_copy_$SCRIPT_PID)" "NOTICE" fi exit 1 fi exit $? } # delete_propagation(replica name, deleted_list_filename, deleted_failed_file_list) function deletion_propagation { local replica_type="${1}" # Contains replica type: master, slave local deleted_list_file="${2}" # file containing deleted file list, will be prefixed with replica type local deleted_failed_list_file="${3}" # file containing files that couldn't be deleted on last run, will be prefixed with replica type __CheckArguments 3 "$#" "$FUNCNAME" "$*" Logger "Propagating deletions to $replica_type replica." "NOTICE" if [ "$replica_type" == "master" ]; then REPLICA_DIR="$MASTER_SYNC_DIR" DELETE_DIR="$MASTER_DELETE_DIR" _delete_local "$REPLICA_DIR" "slave$deleted_list_file" "$DELETE_DIR" "slave$deleted_failed_list_file" & child_pid=$! WaitForCompletion $child_pid $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME retval=$? if [ $retval != 0 ]; then Logger "Deletion on replica $replica_type failed." "CRITICAL" exit 1 fi else REPLICA_DIR="$SLAVE_SYNC_DIR" DELETE_DIR="$SLAVE_DELETE_DIR" if [ "$REMOTE_SYNC" == "yes" ]; then _delete_remote "$REPLICA_DIR" "master$deleted_list_file" "$DELETE_DIR" "master$deleted_failed_list_file" & else _delete_local "$REPLICA_DIR" "master$deleted_list_file" "$DELETE_DIR" "master$deleted_failed_list_file" & fi child_pid=$! WaitForCompletion $child_pid $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME retval=$? if [ $retval == 0 ]; then if [ -f $RUN_DIR/osync_remote_deletion_$SCRIPT_PID ] && [ $_VERBOSE -eq 1 ]; then Logger "Remote:\n$(cat $RUN_DIR/osync_remote_deletion_$SCRIPT_PID)" "DEBUG" fi return $retval else Logger "Deletion on remote system failed." "CRITICAL" if [ -f $RUN_DIR/osync_remote_deletion_$SCRIPT_PID ]; then Logger "Remote:\n$(cat $RUN_DIR/osync_remote_deletion_$SCRIPT_PID)" "CRITICAL" fi exit 1 fi fi } ###### Sync function in 5 steps of each 2 runs (functions above) ###### ###### Step 1: Create current tree list for master and slave replicas (Steps 1M and 1S) ###### Step 2: Create deleted file list for master and slave replicas (Steps 2M and 2S) ###### Step 3: Update master and slave replicas (Steps 3M and 3S, order depending on conflict prevalence) ###### Step 4: Deleted file propagation to master and slave replicas (Steps 4M and 4S) ###### Step 5: Create after run tree list for master and slave replicas (Steps 5M and 5S) function Sync { Logger "Starting synchronization task." "NOTICE" CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost if [ -f "$MASTER_LAST_ACTION" ] && [ "$RESUME_SYNC" != "no" ]; then resume_sync=$(cat "$MASTER_LAST_ACTION") if [ -f "$MASTER_RESUME_COUNT" ]; then resume_count=$(cat "$MASTER_RESUME_COUNT") else resume_count=0 fi if [ $resume_count -lt $RESUME_TRY ]; then if [ "$resume_sync" != "sync.success" ]; then Logger "WARNING: Trying to resume aborted osync execution on $($STAT_CMD "$MASTER_LAST_ACTION") at task [$resume_sync]. [$resume_count] previous tries." "WARN" echo $(($resume_count+1)) > "$MASTER_RESUME_COUNT" else resume_sync=none fi else Logger "Will not resume aborted osync execution. Too much resume tries [$resume_count]." "WARN" echo "noresume" > "$MASTER_LAST_ACTION" echo "0" > "$MASTER_RESUME_COUNT" resume_sync=none fi else resume_sync=none fi ################################################################################################################################################# Actual sync begins here ## This replaces the case statement because ;& operator is not supported in bash 3.2... Code is more messy than case :( if [ "$resume_sync" == "none" ] || [ "$resume_sync" == "noresume" ] || [ "$resume_sync" == "master-replica-tree.fail" ]; then #master_tree_current tree_list "$MASTER_SYNC_DIR" master "$TREE_CURRENT_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[0]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNC_ACTION[0]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[0]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[1]}.fail" ]; then #slave_tree_current tree_list "$SLAVE_SYNC_DIR" slave "$TREE_CURRENT_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[1]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNC_ACTION[1]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[1]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[2]}.fail" ]; then delete_list master "$TREE_AFTER_FILENAME" "$TREE_CURRENT_FILENAME" "$DELETED_LIST_FILENAME" "$FAILED_DELETE_LIST_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[2]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNc_ACTION[2]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[2]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[3]}.fail" ]; then delete_list slave "$TREE_AFTER_FILENAME" "$TREE_CURRENT_FILENAME" "$DELETED_LIST_FILENAME" "$FAILED_DELETE_LIST_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[3]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNC_ACTION[3]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[3]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[4]}.fail" ] || [ "$resume_sync" == "${SYNC_ACTION[5]}.fail" ] || [ "$resume_sync" == "${SYNC_ACTION[4]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[5]}.success" ]; then if [ "$CONFLICT_PREVALANCE" != "master" ]; then if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[3]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[4]}.fail" ]; then sync_update slave master "$DELETED_LIST_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[4]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNC_ACTION[4]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[4]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[5]}.fail" ]; then sync_update master slave "$DELETED_LIST_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[5]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNC_ACTION[5]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi else if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[3]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[5]}.fail" ]; then sync_update master slave "$DELETED_LIST_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[5]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNC_ACTION[5]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[5]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[4]}.fail" ]; then sync_update slave master "$DELETED_LIST_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[4]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNC_ACTION[4]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi fi fi if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[5]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[4]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[6]}.fail" ]; then deletion_propagation slave "$DELETED_LIST_FILENAME" "$FAILED_DELETE_LIST_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[6]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNC_ACTION[6]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[6]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[7]}.fail" ]; then deletion_propagation master "$DELETED_LIST_FILENAME" "$FAILED_DELETE_LIST_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[7]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNC_ACTION[7]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[7]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[8]}.fail" ]; then #master_tree_after tree_list "$MASTER_SYNC_DIR" master "$TREE_AFTER_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[8]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNC_ACTION[8]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi if [ "$resume_sync" == "resumed" ] || [ "$resume_sync" == "${SYNC_ACTION[8]}.success" ] || [ "$resume_sync" == "${SYNC_ACTION[9]}.fail" ]; then #slave_tree_after tree_list "$SLAVE_SYNC_DIR" slave "$TREE_AFTER_FILENAME" if [ $? == 0 ]; then echo "${SYNC_ACTION[9]}.success" > "$MASTER_LAST_ACTION" else echo "${SYNC_ACTION[9]}.fail" > "$MASTER_LAST_ACTION" fi resume_sync="resumed" fi Logger "Finished synchronization task." "NOTICE" echo "${SYNC_ACTION[10]}" > "$MASTER_LAST_ACTION" echo "0" > "$MASTER_RESUME_COUNT" } function SoftDelete { if [ "$CONFLICT_BACKUP" != "no" ] && [ $CONFLICT_BACKUP_DAYS -ne 0 ]; then Logger "Running conflict backup cleanup." "NOTICE" _SoftDelete $CONFLICT_BACKUP_DAYS "$MASTER_SYNC_DIR$MASTER_BACKUP_DIR" "$SLAVE_SYNC_DIR$SLAVE_BACKUP_DIR" fi if [ "$SOFT_DELETE" != "no" ] && [ $SOFT_DELETE_DAYS -ne 0 ]; then Logger "Running soft deletion cleanup." "NOTICE" _SoftDelete $SOFT_DELETE_DAYS "$MASTER_SYNC_DIR$MASTER_DELETE_DIR" "$SLAVE_SYNC_DIR$SLAVE_DELETE_DIR" fi } # Takes 3 arguments # $1 = ctime (CONFLICT_BACKUP_DAYS or SOFT_DELETE_DAYS), $2 = MASTER_(BACKUP/DELETED)_DIR, $3 = SLAVE_(BACKUP/DELETED)_DIR function _SoftDelete { local change_time="${1}" # Contains the number of days a file needs to be old to be processed here (conflict or soft deletion) local master_directory="${2}" # Master backup / deleted directory to search in local slave_directory="${3}" # Slave backup / deleted directory to search in __CheckArguments 3 "$#" "$FUNCNAME" "$*" if [ -d "$master_directory" ]; then if [ $_DRYRUN -eq 1 ]; then Logger "Listing files older than $change_time days on master replica. Won't remove anything." "NOTICE" else Logger "Removing files older than $change_time days on master replica." "NOTICE" fi if [ $_VERBOSE -eq 1 ]; then # Cannot launch log function from xargs, ugly hack $FIND_CMD "$master_directory/" -type f -ctime +$change_time -print0 | xargs -0 -I {} echo "Will delete file {}" > $RUN_DIR/osync_soft_delete_master_$SCRIPT_PID Logger "Command output:\n$(cat $RUN_DIR/osync_soft_delete_master_$SCRIPT_PID)" "NOTICE" $FIND_CMD "$master_directory/" -type d -empty -ctime +$change_time -print0 | xargs -0 -I {} echo "Will delete directory {}" > $RUN_DIR/osync_soft_delete_master_$SCRIPT_PID Logger "Command output:\n$(cat $RUN_DIR/osync_soft_delete_master_$SCRIPT_PID)" "NOTICE" fi if [ $_DRYRUN -ne 1 ]; then $FIND_CMD "$master_directory/" -type f -ctime +$change_time -print0 | xargs -0 -I {} rm -f "{}" && $FIND_CMD "$master_directory/" -type d -empty -ctime +$change_time -print0 | xargs -0 -I {} rm -rf "{}" > $RUN_DIR/osync_soft_delete_master_$SCRIPT_PID 2>&1 & else Dummy & fi child_pid=$! WaitForCompletion $child_pid $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME retval=$? if [ $retval -ne 0 ]; then Logger "Error while executing cleanup on master replica." "ERROR" Logger "Command output:\n$(cat $RUN_DIR/osync_soft_delete_master_$SCRIPT_PID)" "NOTICE" else Logger "Cleanup complete on master replica." "NOTICE" fi elif [ -d "$master_directory" ] && ! [ -w "$master_directory" ]; then Logger "Warning: Master replica dir [$master_directory] isn't writable. Cannot clean old files." "ERROR" fi if [ "$REMOTE_SYNC" == "yes" ]; then CheckConnectivity3rdPartyHosts CheckConnectivityRemoteHost if [ $_DRYRUN -eq 1 ]; then Logger "Listing files older than $change_time days on slave replica. Won't remove anything." "NOTICE" else Logger "Removing files older than $change_time days on slave replica." "NOTICE" fi if [ $_VERBOSE -eq 1 ]; then # Cannot launch log function from xargs, ugly hack eval "$SSH_CMD \"if [ -w \\\"$slave_directory\\\" ]; then $COMMAND_SUDO $REMOTE_FIND_CMD \\\"$slave_directory/\\\" -type f -ctime +$change_time -print0 | xargs -0 -I {} echo Will delete file {} && $REMOTE_FIND_CMD \\\"$slave_directory/\\\" -type d -empty -ctime $change_time -print0 | xargs -0 -I {} echo Will delete directory {}; fi\"" > $RUN_DIR/osync_soft_delete_slave_$SCRIPT_PID Logger "Command output:\n$(cat $RUN_DIR/osync_soft_delete_slave_$SCRIPT_PID)" "NOTICE" fi if [ $_DRYRUN -ne 1 ]; then eval "$SSH_CMD \"if [ -w \\\"$slave_directory\\\" ]; then $COMMAND_SUDO $REMOTE_FIND_CMD \\\"$slave_directory/\\\" -type f -ctime +$change_time -print0 | xargs -0 -I {} rm -f \\\"{}\\\" && $REMOTE_FIND_CMD \\\"$slave_directory/\\\" -type d -empty -ctime $change_time -print0 | xargs -0 -I {} rm -rf \\\"{}\\\"; fi 2>&1\"" > $RUN_DIR/osync_soft_delete_slave_$SCRIPT_PID & else Dummy & fi child_pid=$! WaitForCompletion $child_pid $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME retval=$? if [ $retval -ne 0 ]; then Logger "Error while executing cleanup on slave replica." "ERROR" Logger "Command output:\n$(cat $RUN_DIR/osync_soft_delete_slave_$SCRIPT_PID)" "NOTICE" else Logger "Cleanup complete on slave replica." "NOTICE" fi else if [ -w "$slave_directory" ]; then if [ $_DRYRUN -eq 1 ]; then Logger "Listing files older than $change_time days on slave replica. Won't remove anything." "NOTICE" else Logger "Removing files older than $change_time days on slave replica." "NOTICE" fi if [ $_VERBOSE -eq 1 ]; then # Cannot launch log function from xargs, ugly hack $FIND_CMD "$slave_directory/" -type f -ctime +$change_time -print0 | xargs -0 -I {} echo "Will delete file {}" > $RUN_DIR/osync_soft_delete_slave_$SCRIPT_PID Logger "Command output:\n$(cat $RUN_DIR/osync_soft_delete_slave_$SCRIPT_PID)" "NOTICE" $FIND_CMD "$slave_directory/" -type d -empty -ctime +$change_time -print0 | xargs -0 -I {} echo "Will delete directory {}" > $RUN_DIR/osync_soft_delete_slave_$SCRIPT_PID Logger "Command output:\n$(cat $RUN_DIR/osync_soft_delete_slave_$SCRIPT_PID)" "NOTICE" Dummy & fi if [ $_DRYRUN -ne 1 ]; then $FIND_CMD "$slave_directory/" -type f -ctime +$change_time -print0 | xargs -0 -I {} rm -f "{}" && $FIND_CMD "$slave_directory/" -type d -empty -ctime +$change_time -print0 | xargs -0 -I {} rm -rf "{}" > $RUN_DIR/osync_soft_delete_slave_$SCRIPT_PID & fi child_pid=$! WaitForCompletion $child_pid $SOFT_MAX_EXEC_TIME $HARD_MAX_EXEC_TIME retval=$? if [ $retval -ne 0 ]; then Logger "Error while executing cleanup on slave replica." "ERROR" Logger "Command output:\n$(cat $RUN_DIR/osync_soft_delete_slave_$SCRIPT_PID)" "NOTICE" else Logger "Cleanup complete on slave replica." "NOTICE" fi elif [ -d "$slave_directory" ] && ! [ -w "$slave_directory" ]; then Logger "Warning: Slave replica dir [$slave_directory] isn't writable. Cannot clean old files." "ERROR" fi fi } function Init { # Set error exit code if a piped command fails set -o pipefail set -o errtrace # Do not use exit and quit traps if osync runs in monitor mode if [ $sync_on_changes -eq 0 ]; then trap TrapStop SIGINT SIGKILL SIGHUP SIGTERM SIGQUIT trap TrapQuit SIGKILL EXIT else trap TrapQuit SIGTERM EXIT SIGKILL SIGHUP SIGQUIT fi if [ "$_DEBUG" == "yes" ]; then trap 'TrapError ${LINENO} $?' ERR fi MAIL_ALERT_MSG="Warning: Execution of osync instance $OSYNC_ID (pid $SCRIPT_PID) as $LOCAL_USER@$LOCAL_HOST produced errors on $(date)." ## Test if slave dir is a ssh uri, and if yes, break it down it its values if [ "${SLAVE_SYNC_DIR:0:6}" == "ssh://" ]; then REMOTE_SYNC="yes" # remove leadng 'ssh://' uri=${SLAVE_SYNC_DIR#ssh://*} if [[ "$uri" == *"@"* ]]; then # remove everything after '@' REMOTE_USER=${uri%@*} else REMOTE_USER=$LOCAL_USER fi if [ "$SSH_RSA_PRIVATE_KEY" == "" ]; then SSH_RSA_PRIVATE_KEY=~/.ssh/id_rsa fi # remove everything before '@' _hosturiandpath=${uri#*@} # remove everything after first '/' _hosturi=${_hosturiandpath%%/*} if [[ "$_hosturi" == *":"* ]]; then REMOTE_PORT=${_hosturi##*:} else REMOTE_PORT=22 fi REMOTE_HOST=${_hosturi%%:*} # remove everything before first '/' SLAVE_SYNC_DIR=${_hosturiandpath#*/} fi ## Make sure there is only one trailing slash on path MASTER_SYNC_DIR="${MASTER_SYNC_DIR%/}/" SLAVE_SYNC_DIR="${SLAVE_SYNC_DIR%/}/" MASTER_STATE_DIR="$MASTER_SYNC_DIR$OSYNC_DIR/state" SLAVE_STATE_DIR="$SLAVE_SYNC_DIR$OSYNC_DIR/state" STATE_DIR="$OSYNC_DIR/state" MASTER_LOCK="$MASTER_STATE_DIR/lock" SLAVE_LOCK="$SLAVE_STATE_DIR/lock" ## Working directories to keep backups of updated / deleted files MASTER_BACKUP_DIR="$OSYNC_DIR/backups" MASTER_DELETE_DIR="$OSYNC_DIR/deleted" SLAVE_BACKUP_DIR="$OSYNC_DIR/backups" SLAVE_DELETE_DIR="$OSYNC_DIR/deleted" ## Partial downloads dirs PARTIAL_DIR=$OSYNC_DIR"_partial" ## SSH compression if [ "$SSH_COMPRESSION" != "no" ]; then SSH_COMP=-C else SSH_COMP= fi ## Define which runner (local bash or distant ssh) to use for standard commands and rsync commands if [ "$REMOTE_SYNC" == "yes" ]; then SSH_CMD="$(type -p ssh) $SSH_COMP -i $SSH_RSA_PRIVATE_KEY $REMOTE_USER@$REMOTE_HOST -p $REMOTE_PORT" SCP_CMD="$(type -p scp) $SSH_COMP -i $SSH_RSA_PRIVATE_KEY -P $REMOTE_PORT" RSYNC_SSH_CMD="$(type -p ssh) $SSH_COMP -i $SSH_RSA_PRIVATE_KEY -p $REMOTE_PORT" fi ## Support for older config files without RSYNC_EXECUTABLE option if [ "$RSYNC_EXECUTABLE" == "" ]; then RSYNC_EXECUTABLE=rsync fi ## Sudo execution option if [ "$SUDO_EXEC" == "yes" ]; then if [ "$RSYNC_REMOTE_PATH" != "" ]; then RSYNC_PATH="sudo $RSYNC_REMOTE_PATH/$RSYNC_EXECUTABLE" else RSYNC_PATH="sudo $RSYNC_EXECUTABLE" fi COMMAND_SUDO="sudo" else if [ "$RSYNC_REMOTE_PATH" != "" ]; then RSYNC_PATH="$RSYNC_REMOTE_PATH/$RSYNC_EXECUTABLE" else RSYNC_PATH="$RSYNC_EXECUTABLE" fi COMMAND_SUDO="" fi ## Set rsync default arguments RSYNC_ARGS="-rlptgoD" if [ "$PRESERVE_ACL" == "yes" ]; then RSYNC_ARGS=$RSYNC_ARGS" -A" fi if [ "$PRESERVE_XATTR" == "yes" ]; then RSYNC_ARGS=$RSYNC_ARGS" -X" fi if [ "$RSYNC_COMPRESS" == "yes" ]; then RSYNC_ARGS=$RSYNC_ARGS" -z" fi if [ "$COPY_SYMLINKS" == "yes" ]; then RSYNC_ARGS=$RSYNC_ARGS" -L" fi if [ "$KEEP_DIRLINKS" == "yes" ]; then RSYNC_ARGS=$RSYNC_ARGS" -K" fi if [ "$PRESERVE_HARDLINKS" == "yes" ]; then RSYNC_ARGS=$RSYNC_ARGS" -H" fi if [ "$CHECKSUM" == "yes" ]; then RSYNC_ARGS=$RSYNC_ARGS" --checksum" fi if [ $_DRYRUN -eq 1 ]; then RSYNC_ARGS=$RSYNC_ARGS" -n" DRY_WARNING="/!\ DRY RUN" fi if [ "$BANDWIDTH" != "" ] && [ "$BANDWIDTH" != "0" ]; then RSYNC_ARGS=$RSYNC_ARGS" --bwlimit=$BANDWIDTH" fi ## Set sync only function arguments for rsync SYNC_OPTS="-u" if [ $_VERBOSE -eq 1 ]; then SYNC_OPTS=$SYNC_OPTS"i" fi if [ $stats -eq 1 ]; then SYNC_OPTS=$SYNC_OPTS" --stats" fi if [ "$PARTIAL" == "yes" ]; then SYNC_OPTS=$SYNC_OPTS" --partial --partial-dir=\"$PARTIAL_DIR\"" RSYNC_EXCLUDE="$RSYNC_EXCLUDE --exclude=\"$PARTIAL_DIR\"" fi ## Conflict options if [ "$CONFLICT_BACKUP" != "no" ]; then MASTER_BACKUP="--backup --backup-dir=\"$MASTER_BACKUP_DIR\"" SLAVE_BACKUP="--backup --backup-dir=\"$SLAVE_BACKUP_DIR\"" if [ "$CONFLICT_BACKUP_MULTIPLE" == "yes" ]; then MASTER_BACKUP="$MASTER_BACKUP --suffix .$(date +%Y.%m.%d-%H.%M.%S)" SLAVE_BACKUP="$SLAVE_BACKUP --suffix .$(date +%Y.%m.%d-%H.%M.%S)" fi else MASTER_BACKUP= SLAVE_BACKUP= fi ## Add Rsync exclude patterns RsyncExcludePattern ## Add Rsync exclude from file RsyncExcludeFrom ## Filenames for state files if [ $_DRYRUN -eq 1 ]; then dry_suffix="-dry" fi TREE_CURRENT_FILENAME="-tree-current-$SYNC_ID$dry_suffix" TREE_AFTER_FILENAME="-tree-after-$SYNC_ID$dry_suffix" TREE_AFTER_FILENAME_NO_SUFFIX="-tree-after-$SYNC_ID" DELETED_LIST_FILENAME="-deleted-list-$SYNC_ID$dry_suffix" FAILED_DELETE_LIST_FILENAME="-failed-delete-$SYNC_ID$dry_suffix" MASTER_LAST_ACTION="$MASTER_STATE_DIR/last-action-$SYNC_ID$dry_suffix" MASTER_RESUME_COUNT="$MASTER_STATE_DIR/resume-count-$SYNC_ID$dry_suffix" ## Sync function actions (0-9) SYNC_ACTION=( 'master-replica-tree' 'slave-replica-tree' 'master-deleted-list' 'slave-deleted-list' 'update-master-replica' 'update-slave-replica' 'delete-propagation-slave' 'delete-propagation-master' 'master-replica-tree-after' 'slave-replica-tree-after' 'sync.success' ) ## Set compression executable and extension COMPRESSION_LEVEL=3 if type -p xz > /dev/null 2>&1 then COMPRESSION_PROGRAM="| xz -$COMPRESSION_LEVEL" COMPRESSION_EXTENSION=.xz elif type -p lzma > /dev/null 2>&1 then COMPRESSION_PROGRAM="| lzma -$COMPRESSION_LEVEL" COMPRESSION_EXTENSION=.lzma elif type -p pigz > /dev/null 2>&1 then COMPRESSION_PROGRAM="| pigz -$COMPRESSION_LEVEL" COMPRESSION_EXTENSION=.gz COMPRESSION_OPTIONS=--rsyncable elif type -p gzip > /dev/null 2>&1 then COMPRESSION_PROGRAM="| gzip -$COMPRESSION_LEVEL" COMPRESSION_EXTENSION=.gz COMPRESSION_OPTIONS=--rsyncable else COMPRESSION_PROGRAM= COMPRESSION_EXTENSION= fi ALERT_LOG_FILE="$ALERT_LOG_FILE$COMPRESSION_EXTENSION" } function InitLocalOSSettings { ## If running under Msys, some commands don't run the same way ## Using mingw version of find instead of windows one ## Getting running processes is quite different ## Ping command isn't the same if [ "$LOCAL_OS" == "msys" ]; then FIND_CMD=$(dirname $BASH)/find #TODO: The following command needs to be checked on msys. Does the $1 variable substitution work ? # PROCESS_TEST_CMD assumes there is a variable $pid PROCESS_TEST_CMD='ps -a | awk "{\$1=\$1}\$1" | awk "{print \$1}" | grep $pid' PING_CMD="ping -n 2" else FIND_CMD=find # PROCESS_TEST_CMD assumes there is a variable $pid PROCESS_TEST_CMD='ps -p$pid' PING_CMD="ping -c 2 -i .2" fi ## Stat command has different syntax on Linux and FreeBSD/MacOSX if [ "$LOCAL_OS" == "MacOSX" ] || [ "$LOCAL_OS" == "BSD" ]; then STAT_CMD="stat -f \"%Sm\"" else STAT_CMD="stat --format %y" fi } function InitRemoteOSSettings { ## MacOSX does not use the -E parameter like Linux or BSD does (-E is mapped to extended attrs instead of preserve executability) if [ "$LOCAL_OS" != "MacOSX" ] && [ "$REMOTE_OS" != "MacOSX" ]; then RSYNC_ARGS=$RSYNC_ARGS" -E" fi if [ "$REMOTE_OS" == "msys" ]; then REMOTE_FIND_CMD=$(dirname $BASH)/find else REMOTE_FIND_CMD=find fi } function Main { CreateOsyncDirs LockDirectories Sync } function Usage { echo "$PROGRAM $PROGRAM_VERSION $PROGRAM_BUILD" echo $AUTHOR echo $CONTACT echo "" echo "You may use Osync with a full blown configuration file, or use its default options for quick command line sync." echo "Usage: osync.sh /path/to/config/file [OPTIONS]" echo "or osync.sh --master=/path/to/master/replica --slave=/path/to/slave/replica [OPTIONS] [QUICKSYNC OPTIONS]" echo "or osync.sh --master=/path/to/master/replica --slave=ssh://[backupuser]@remotehost.com[:portnumber]//path/to/slave/replica [OPTIONS] [QUICKSYNC OPTIONS]" echo "" echo "[OPTIONS]" echo "--dry Will run osync without actually doing anything; just testing" echo "--silent Will run osync without any output to stdout, used for cron jobs" echo "--verbose Increases output" echo "--stats Adds rsync transfer statistics to verbose output" echo "--partial Allows rsync to keep partial downloads that can be resumed later (experimental)" echo "--no-maxtime Disables any soft and hard execution time checks" echo "--force-unlock Will override any existing active or dead locks on master and slave replica" echo "--on-changes Will launch a sync task after a short wait period if there is some file activity on master replica. You should try daemon mode instead" echo "" echo "[QUICKSYNC OPTIONS]" echo "--master=\"\" Master replica path. Will contain state and backup directory (is mandatory)" echo "--slave=\"\" Local or remote slave replica path. Can be a ssh uri like ssh://user@host.com:22//path/to/slave/replica (is mandatory)" echo "--rsakey=\"\" Alternative path to rsa private key for ssh connection to slave replica" echo "--sync-id=\"\" Optional sync task name to identify this synchronization task when using multiple slaves" echo "" echo "Additionnaly, you may set most osync options at runtime. eg:" echo "SOFT_DELETE_DAYS=365 osync.sh --master=/path --slave=/other/path" echo "" exit 128 } function SyncOnChanges { if ! type -p inotifywait > /dev/null 2>&1 then Logger "No inotifywait command found. Cannot monitor changes." "CRITICAL" exit 1 fi Logger "#### Running Osync in file monitor mode." "NOTICE" while true do if [ "$ConfigFile" != "" ]; then cmd="bash $osync_cmd \"$ConfigFile\" $opts" else cmd="bash $osync_cmd $opts" fi eval $cmd retval=$? if [ $retval != 0 ]; then Logger "osync child exited with error." "CRITICAL" exit $retval fi Logger "#### Monitoring now." "NOTICE" inotifywait --exclude $OSYNC_DIR $RSYNC_EXCLUDE -qq -r -e create -e modify -e delete -e move -e attrib --timeout "$MAX_WAIT" "$MASTER_SYNC_DIR" & sub_pid=$! wait $sub_pid retval=$? if [ $retval == 0 ]; then Logger "#### Changes detected, waiting $MIN_WAIT seconds before running next sync." "NOTICE" sleep $MIN_WAIT elif [ $retval == 2 ]; then Logger "#### $MAX_WAIT timeout reached, running sync." "NOTICE" else Logger "#### inotify error detected, waiting $MIN_WAIT seconds before running next sync." "ERROR" sleep $MIN_WAIT fi done } # Comand line argument flags _DRYRUN=0 _SILENT=0 if [ "$_DEBUG" == "yes" ] then _VERBOSE=1 else _VERBOSE=0 fi stats=0 PARTIAL=0 force_unlock=0 no_maxtime=0 # Alert flags opts="" soft_alert_total=0 error_alert=0 soft_stop=0 quick_sync=0 sync_on_changes=0 _NOLOCKS=0 osync_cmd=$0 if [ $# -eq 0 ] then Usage fi first=1 for i in "$@" do case $i in --dry) _DRYRUN=1 opts=$opts" --dry" ;; --_SILENT) _SILENT=1 opts=$opts" --_SILENT" ;; --verbose) _VERBOSE=1 opts=$opts" --_VERBOSE" ;; --stats) stats=1 opts=$opts" --stats" ;; --partial) PARTIAL="yes" opts=$opts" --partial" ;; --force-unlock) force_unlock=1 opts=$opts" --force-unlock" ;; --no-maxtime) no_maxtime=1 opts=$opts" --no-maxtime" ;; --help|-h|--version|-v) Usage ;; --master=*) quick_sync=$(($quick_sync + 1)) no_maxtime=1 MASTER_SYNC_DIR=${i##*=} opts=$opts" --master=\"$MASTER_SYNC_DIR\"" ;; --slave=*) quick_sync=$(($quick_sync + 1)) SLAVE_SYNC_DIR=${i##*=} opts=$opts" --slave=\"$SLAVE_SYNC_DIR\"" no_maxtime=1 ;; --rsakey=*) SSH_RSA_PRIVATE_KEY=${i##*=} opts=$opts" --rsakey=\"$SSH_RSA_PRIVATE_KEY\"" ;; --sync-id=*) SYNC_ID=${i##*=} opts=$opts" --sync-id=\"$SYNC_ID\"" ;; --on-changes) sync_on_changes=1 _NOLOCKS=1 ;; --no-locks) _NOLOCKS=1 ;; *) if [ $first == "0" ]; then Logger "Unknown option '$i'" "CRITICAL" Usage fi ;; esac first=0 done # Remove leading space if there is one opts="${opts# *}" CheckEnvironment if [ $? == 0 ] then ## Here we set default options for quicksync tasks when no configuration file is provided. if [ $quick_sync -eq 2 ]; then if [ "$SYNC_ID" == "" ]; then SYNC_ID="quicksync task" fi # Let the possibility to initialize those values directly via command line like SOFT_DELETE_DAYS=60 ./osync.sh if [ "$MINIMUM_SPACE" == "" ]; then MINIMUM_SPACE=1024 fi if [ "$CONFLICT_BACKUP_DAYS" == "" ]; then CONFLICT_BACKUP_DAYS=30 fi if [ "$SOFT_DELETE_DAYS" == "" ]; then SOFT_DELETE_DAYS=30 fi if [ "$RESUME_TRY" == "" ]; then RESUME_TRY=1 fi if [ "$SOFT_MAX_EXEC_TIME" == "" ]; then SOFT_MAX_EXEC_TIME=0 fi if [ "$HARD_MAX_EXEC_TIME" == "" ]; then HARD_MAX_EXEC_TIME=0 fi MIN_WAIT=30 REMOTE_SYNC=no else ConfigFile="${1}" LoadConfigFile "$ConfigFile" fi if [ "$LOGFILE" == "" ]; then if [ -w /var/log ]; then LOG_FILE=/var/log/osync_$SYNC_ID.log else LOG_FILE=./osync_$SYNC_ID.log fi else LOG_FILE="$LOGFILE" fi GetLocalOS InitLocalOSSettings Init GetRemoteOS InitRemoteOSSettings if [ $sync_on_changes -eq 1 ]; then SyncOnChanges else DATE=$(date) Logger "-------------------------------------------------------------" "NOTICE" Logger "$DRY_WARNING $DATE - $PROGRAM $PROGRAM_VERSION script begin." "NOTICE" Logger "-------------------------------------------------------------" "NOTICE" Logger "Sync task [$SYNC_ID] launched as $LOCAL_USER@$LOCAL_HOST (PID $SCRIPT_PID)" "NOTICE" if [ $no_maxtime -eq 1 ]; then SOFT_MAX_EXEC_TIME=0 HARD_MAX_EXEC_TIME=0 fi CheckMasterSlaveDirs CheckMinimumSpace if [ $? == 0 ]; then RunBeforeHook Main if [ $? == 0 ]; then SoftDelete fi RunAfterHook fi fi else Logger "Environment not suitable to run osync." "CRITICAL" exit 1 fi