You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
238 lines
11 KiB
C++
238 lines
11 KiB
C++
#include "usbd_descriptors.h"
|
|
|
|
#include "usbd_report.h"
|
|
|
|
#include "usbd_def.h"
|
|
|
|
// USB HID device FS Configuration Descriptor
|
|
__ALIGN_BEGIN uint8_t USBD_HID_CUSTOM_CfgFSDesc[USB_HID_CUSTOM_CONFIG_DESC_SIZ] __ALIGN_END = {
|
|
0x09, // bLength: Configuration Descriptor size
|
|
USB_DESC_TYPE_CONFIGURATION, // bDescriptorType: Configuration
|
|
LOBYTE(USB_HID_CUSTOM_CONFIG_DESC_SIZ), // wTotalLength: Bytes returned
|
|
HIBYTE(USB_HID_CUSTOM_CONFIG_DESC_SIZ),
|
|
0x04, //bNumInterfaces: 2 interface
|
|
0x01, //bConfigurationValue: Configuration value
|
|
0x00, //iConfiguration: Index of string descriptor describing the configuration
|
|
0xA0, //bmAttributes: bus powered and no Support Remote Wake-up
|
|
0xFA, //MaxPower 100 mA: this current is used for detecting Vbus
|
|
|
|
//Interface 0
|
|
9, //bLength (length of interface descriptor 9 bytes)
|
|
4, //bDescriptorType (4 is interface)
|
|
0, //bInterfaceNumber (This is interface 0)
|
|
0, //bAlternateSetting (used to select alternate setting. notused)
|
|
2, //bNumEndpoints (this interface has 2 endpoints)
|
|
0xFF, //bInterfaceClass (Vendor Defined is 255)
|
|
0x5D, //bInterfaceSubClass
|
|
0x01, //bInterfaceProtocol
|
|
0, //iInterface (Index of string descriptor for describing this notused)
|
|
//Some sort of common descriptor? I pulled this from Message Analyzer dumps of an actual controller
|
|
17,33,0,1,1,37,129,20,0,0,0,0,19,2,8,0,0,
|
|
//Endpoint 1 IN
|
|
7, //bLength (length of ep1in in descriptor 7 bytes)
|
|
5, //bDescriptorType (5 is endpoint)
|
|
0x81, //bEndpointAddress (0x81 is IN1)
|
|
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
|
|
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
|
|
4, //bInterval (polling interval in frames 4 frames)
|
|
//Endpoint 2 OUT
|
|
7, //bLength (length of ep2out in descriptor 7 bytes)
|
|
5, //bDescriptorType (5 is endpoint)
|
|
0x02, //bEndpointAddress (0x02 is OUT2)
|
|
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
|
|
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
|
|
8, //bInterval (polling interval in frames 8 frames)
|
|
//Interface 1
|
|
9, //bLength (length of interface descriptor 9 bytes)
|
|
4, //bDescriptorType (4 is interface)
|
|
1, //bInterfaceNumber (This is interface 1)
|
|
0, //bAlternateSetting (used to select alternate setting. notused)
|
|
4, //bNumEndpoints (this interface has 4 endpoints)
|
|
0xFF, //bInterfaceClass (Vendor Defined is 255)
|
|
0x5D, //bInterfaceSubClass (93)
|
|
0x03, //bInterfaceProtocol (3)
|
|
0, //iInterface (Index of string descriptor for describing this notused)
|
|
//A different common descriptor? I pulled this from Message Analyzer dumps of an actual controller
|
|
27,33,0,1,1,1,131,64,1,4,32,22,133,0,0,0,0,0,0,22,5,0,0,0,0,0,0,
|
|
//Endpoint 3 IN
|
|
7, //bLength (length of ep3in descriptor 7 bytes)
|
|
5, //bDescriptorType (5 is endpoint)
|
|
0x83, //bEndpointAddress (0x83 is IN3)
|
|
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
|
|
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
|
|
2, //bInterval (polling interval in frames 2 frames)
|
|
//Endpoint 4 OUT
|
|
7, //bLength (length of ep4out descriptor 7 bytes)
|
|
5, //bDescriptorType (5 is endpoint)
|
|
0x04, //bEndpointAddress (0x04 is OUT4)
|
|
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
|
|
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
|
|
4, //bInterval (polling interval in frames 4 frames)
|
|
//Endpoint 5 IN
|
|
7, //bLength (length of ep5in descriptor 7 bytes)
|
|
5, //bDescriptorType (5 is endpoint)
|
|
0x85, //bEndpointAddress (0x85 is IN5)
|
|
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
|
|
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
|
|
64, //bInterval (polling interval in frames 64 frames)
|
|
//Endpoint 5 OUT (shares endpoint number with previous)
|
|
7, //bLength (length of ep5out descriptor 7 bytes)
|
|
5, //bDescriptorType (5 is endpoint)
|
|
0x05, //bEndpointAddress (0x05 is OUT5)
|
|
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
|
|
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
|
|
16, //bInterval (polling interval in frames 16 frames)
|
|
//Interface 2
|
|
9, //bLength (length of interface descriptor 9 bytes)
|
|
4, //bDescriptorType (4 is interface)
|
|
2, //bInterfaceNumber (This is interface 2)
|
|
0, //bAlternateSetting (used to select alternate setting. notused)
|
|
1, //bNumEndpoints (this interface has 4 endpoints)
|
|
0xFF, //bInterfaceClass (Vendor Defined is 255)
|
|
0x5D, //bInterfaceSubClass (93)
|
|
0x02, //bInterfaceProtocol (3)
|
|
0, //iInterface (Index of string descriptor for describing this notused)
|
|
//Common Descriptor. Seems that these come after every interface description?
|
|
9,33,0,1,1,34,134,7,0,
|
|
//Endpoint 6 IN
|
|
7, //bLength (length of ep6in descriptor 7 bytes)
|
|
5, //bDescriptorType (5 is endpoint)
|
|
0x86, //bEndpointAddress (0x86 is IN6)
|
|
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
|
|
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
|
|
16, //bInterval (polling interval in frames 64 frames)+
|
|
//Interface 3
|
|
//This is the interface on which all the security handshaking takes place
|
|
//We don't use this but it could be used for man-in-the-middle stuff
|
|
9, //bLength (length of interface descriptor 9 bytes)
|
|
4, //bDescriptorType (4 is interface)
|
|
3, //bInterfaceNumber (This is interface 3)
|
|
0, //bAlternateSetting (used to select alternate setting. notused)
|
|
0, //bNumEndpoints (this interface has 0 endpoints ???)
|
|
0xFF, //bInterfaceClass (Vendor Defined is 255)
|
|
0xFD, //bInterfaceSubClass (253)
|
|
0x13, //bInterfaceProtocol (19)
|
|
4, //iInterface (Computer never asks for this, but an x360 would. so include one day?)
|
|
//Another interface another Common Descriptor
|
|
6,65,0,1,1,3
|
|
};
|
|
/*
|
|
// USB HID device HS Configuration Descriptor
|
|
__ALIGN_BEGIN uint8_t USBD_HID_CUSTOM_CfgHSDesc[USB_HID_CUSTOM_CONFIG_DESC_SIZ] __ALIGN_END = {
|
|
0x09, // bLength: Configuration Descriptor size
|
|
USB_DESC_TYPE_CONFIGURATION, // bDescriptorType: Configuration
|
|
LOBYTE(USB_HID_CUSTOM_CONFIG_DESC_SIZ), // wTotalLength: Bytes returned
|
|
HIBYTE(USB_HID_CUSTOM_CONFIG_DESC_SIZ),
|
|
0x01, //bNumInterfaces: 2 interface
|
|
0x01, //bConfigurationValue: Configuration value
|
|
0x00, //iConfiguration: Index of string descriptor describing the configuration
|
|
0xC0, //bmAttributes: bus powered and no Support Remote Wake-up
|
|
0x32, //MaxPower 100 mA: this current is used for detecting Vbus
|
|
|
|
// ************* Descriptor of interface ***************
|
|
// 09
|
|
0x09, //bLength: Interface Descriptor size
|
|
USB_DESC_TYPE_INTERFACE,//bDescriptorType: Interface descriptor type
|
|
HID_CUSTOM_INTERFACE, //bInterfaceNumber: Number of Interface
|
|
0x00, //bAlternateSetting: Alternate setting
|
|
0x01, //bNumEndpoints
|
|
0x03, //bInterfaceClass: HID
|
|
0x00, //bInterfaceSubClass : 1=BOOT, 0=no boot
|
|
0x00, //nInterfaceProtocol : 0=none, 1=keyboard, 2=mouse
|
|
0x00, //iInterface: Index of string descriptor
|
|
// ******************* Descriptor of Joystick Mouse HID *******************
|
|
// 18
|
|
0x09, //bLength: HID Descriptor size
|
|
HID_DESCRIPTOR_TYPE, //bDescriptorType: HID
|
|
0x11, //bcdHID: HID Class Spec release number
|
|
0x01,
|
|
0x00, //bCountryCode: Hardware target country
|
|
0x01, //bNumDescriptors: Number of HID class descriptors to follow
|
|
0x22, //bDescriptorType
|
|
HID_JOYSTICK_REPORT_DESC_SIZE,//wItemLength: Total length of Report descriptor
|
|
0x00,
|
|
// ******************* Descriptor of Mouse endpoint *******************
|
|
// 27
|
|
0x07, //bLength: Endpoint Descriptor size
|
|
USB_DESC_TYPE_ENDPOINT, //bDescriptorType:
|
|
|
|
HID_CUSTOM_EPIN_ADDR, //bEndpointAddress: Endpoint Address (IN)
|
|
0x03, //bmAttributes: Interrupt endpoint
|
|
HID_CUSTOM_EPIN_SIZE, //wMaxPacketSize: 4 Byte max
|
|
0x00,
|
|
HID_HS_BINTERVAL, //bInterval: Polling Interval
|
|
};
|
|
|
|
// USB HID device Other Speed Configuration Descriptor
|
|
__ALIGN_BEGIN uint8_t USBD_HID_CUSTOM_OtherSpeedCfgDesc[USB_HID_CUSTOM_CONFIG_DESC_SIZ] __ALIGN_END = {
|
|
0x09, // bLength: Configuration Descriptor size
|
|
USB_DESC_TYPE_CONFIGURATION, // bDescriptorType: Configuration
|
|
LOBYTE(USB_HID_CUSTOM_CONFIG_DESC_SIZ), // wTotalLength: Bytes returned
|
|
HIBYTE(USB_HID_CUSTOM_CONFIG_DESC_SIZ),
|
|
0x01, //bNumInterfaces: 2 interface
|
|
0x01, //bConfigurationValue: Configuration value
|
|
0x00, //iConfiguration: Index of string descriptor describing the configuration
|
|
0xC0, //bmAttributes: bus powered and no Support Remote Wake-up
|
|
0x32, //MaxPower 100 mA: this current is used for detecting Vbus
|
|
|
|
// ************* Descriptor of interface ***************
|
|
// 09
|
|
0x09, //bLength: Interface Descriptor size
|
|
USB_DESC_TYPE_INTERFACE,//bDescriptorType: Interface descriptor type
|
|
HID_CUSTOM_INTERFACE, //bInterfaceNumber: Number of Interface
|
|
0x00, //bAlternateSetting: Alternate setting
|
|
0x01, //bNumEndpoints
|
|
0x03, //bInterfaceClass: HID
|
|
0x00, //bInterfaceSubClass : 1=BOOT, 0=no boot
|
|
0x00, //nInterfaceProtocol : 0=none, 1=keyboard, 2=mouse
|
|
0x00, //iInterface: Index of string descriptor
|
|
// ******************* Descriptor of Joystick Mouse HID *******************
|
|
// 18
|
|
0x09, //bLength: HID Descriptor size
|
|
HID_DESCRIPTOR_TYPE, //bDescriptorType: HID
|
|
0x11, //bcdHID: HID Class Spec release number
|
|
0x01,
|
|
0x00, //bCountryCode: Hardware target country
|
|
0x01, //bNumDescriptors: Number of HID class descriptors to follow
|
|
0x22, //bDescriptorType
|
|
HID_JOYSTICK_REPORT_DESC_SIZE,//wItemLength: Total length of Report descriptor
|
|
0x00,
|
|
// ******************* Descriptor of Mouse endpoint *******************
|
|
// 27
|
|
0x07, //bLength: Endpoint Descriptor size
|
|
USB_DESC_TYPE_ENDPOINT, //bDescriptorType:
|
|
|
|
HID_CUSTOM_EPIN_ADDR, //bEndpointAddress: Endpoint Address (IN)
|
|
0x03, //bmAttributes: Interrupt endpoint
|
|
HID_CUSTOM_EPIN_SIZE, //wMaxPacketSize: 4 Byte max
|
|
0x00,
|
|
HID_FS_BINTERVAL, //bInterval: Polling Interval
|
|
};
|
|
|
|
// USB HID device Configuration Descriptor
|
|
__ALIGN_BEGIN uint8_t USBD_HID_CUSTOM_Desc[USB_HID_CUSTOM_DESC_SIZ] __ALIGN_END = {
|
|
USB_HID_CUSTOM_DESC_SIZ, //bLength: HID Descriptor size
|
|
HID_DESCRIPTOR_TYPE, //bDescriptorType: HID
|
|
0x11, //bcdHID: HID Class Spec release number
|
|
0x01,
|
|
0x00, //bCountryCode: Hardware target country
|
|
0x01, //bNumDescriptors: Number of HID class descriptors to follow
|
|
0x22, //bDescriptorType
|
|
HID_JOYSTICK_REPORT_DESC_SIZE,//wItemLength: Total length of Report descriptor
|
|
0x00
|
|
};
|
|
|
|
// USB Standard Device Descriptor
|
|
__ALIGN_BEGIN uint8_t USBD_HID_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END = {
|
|
USB_LEN_DEV_QUALIFIER_DESC,
|
|
USB_DESC_TYPE_DEVICE_QUALIFIER,
|
|
0x00,
|
|
0x02,
|
|
0x00,
|
|
0x00,
|
|
0x00,
|
|
0x40,
|
|
0x01,
|
|
0x00,
|
|
};
|
|
*/ |