mirror of
https://github.com/opnsense/docs
synced 2024-11-09 01:10:33 +00:00
247 lines
22 KiB
ReStructuredText
247 lines
22 KiB
ReStructuredText
=====
|
|
Monit
|
|
=====
|
|
|
|
OPNsense uses Monit for monitoring services. Monit has quite extensive monitoring capatibilities, which is why the
|
|
configuration options are extensive as well. This guide will do a quick walk through the setup, with the
|
|
configuration options explained in more detail afterwards, along with some caveats.
|
|
|
|
------------
|
|
Global setup
|
|
------------
|
|
|
|
Navigate to :menuselection:`Services --> Monit --> Settings`. On the “General Settings” tab, turn on Monit and fill in the details of your SMTP server. Save the changes.
|
|
Then, navigate to the “Alert settings” and add one for your e-mail address. If your mail server requires the “From” field
|
|
to be properly set, enter ``From: sender@example.com`` in the “Mail format” field. Save the alert and apply the changes.
|
|
|
|
---------------
|
|
Adding an alert
|
|
---------------
|
|
|
|
First, you have to decide what you want to monitor and what constitutes a failure. It helps if you have some knowledge
|
|
about how Monit alerts are set up. This is described in the
|
|
`Monit documentation <https://mmonit.com/monit/documentation/monit.html#ALERT-MESSAGES>`_.
|
|
|
|
If you have done that, you have to add the condition first. Navigate to the 'Service Test Settings' tab and look if the
|
|
condition you want to add already exists. If it doesn't, click the + button to add it.
|
|
|
|
Now navigate to the 'Service Test' tab and click the + icon. In the dialog, you can now add your service test. If you're done,
|
|
save it, then apply the changes.
|
|
|
|
The fields in the dialogs are described in more detail in the “Settings overview” section of this document.
|
|
|
|
-------
|
|
Example
|
|
-------
|
|
|
|
In this example, we'll add a service to restart the FTP proxy (running on port 8021) if it has stopped. To avoid an
|
|
eternal loop in case something is wrong, we'll also add a provision to stop trying if the FTP proxy has had to be
|
|
restarted five times in a row.
|
|
|
|
First, make sure you have followed the steps under “Global setup”. Then, navigate to the “Service Tests Settings” tab.
|
|
Here, you need to add two tests:
|
|
|
|
+-----------+------------------------------------------+
|
|
| Setting | Value |
|
|
+===========+==========================================+
|
|
| Name | FTPProxy8021 |
|
|
+-----------+------------------------------------------+
|
|
| Condition | failed host 127.0.0.1 port 8021 type tcp |
|
|
+-----------+------------------------------------------+
|
|
| Action | Restart |
|
|
+-----------+------------------------------------------+
|
|
|
|
+-----------+----------------------------+
|
|
| Setting | Value |
|
|
+===========+============================+
|
|
| Name | RestartLimit5 |
|
|
+-----------+----------------------------+
|
|
| Condition | 5 restarts within 5 cycles |
|
|
+-----------+----------------------------+
|
|
| Action | Unmonitor |
|
|
+-----------+----------------------------+
|
|
|
|
Now, navigate to the “Service Settings” tab. Here, add the following service:
|
|
|
|
+-----------+---------------------------------------------------------+
|
|
| Setting | Value |
|
|
+===========+=========================================================+
|
|
| Name | FTPProxy8021 |
|
|
+-----------+---------------------------------------------------------+
|
|
| Type | Process |
|
|
+-----------+---------------------------------------------------------+
|
|
| PID File | /var/run/osftpproxy.127_0_0_1_8021.pid |
|
|
+-----------+---------------------------------------------------------+
|
|
| Start | /usr/local/sbin/configctl ftpproxy start 127_0_0_1_8021 |
|
|
+-----------+---------------------------------------------------------+
|
|
| Stop | /usr/local/sbin/configctl ftpproxy stop 127_0_0_1_8021 |
|
|
+-----------+---------------------------------------------------------+
|
|
| Tests | FTPProxy8021, RestartLimit5 |
|
|
+-----------+---------------------------------------------------------+
|
|
|
|
Save and apply.
|
|
|
|
-----------------
|
|
Settings overview
|
|
-----------------
|
|
|
|
Navigate to :menuselection:`Services --> Monit --> Settings`. You will see four tabs, which we will describe in more detail below
|
|
|
|
^^^^^^^^^^^^^^^^
|
|
General Settings
|
|
^^^^^^^^^^^^^^^^
|
|
|
|
Click 'advanced mode' to see all the settings.
|
|
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Setting | Description |
|
|
+===============================+=======================================================================================================================+
|
|
| Enable Monit | Turns Monit on or off. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Polling interval | How often Monit checks the status of the components it monitors. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Start delay | How long Monit waits before checking components when it starts. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Mail Server | A list of mail servers to send notifications to (also see below this table). |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Mail Server Port | The mail server port to use. 25 and 465 are common examples. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Username | The username used to log into your SMTP server, if needed. Often, but not always, the same as your e-mail address. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Password | The password used to log into your SMTP server, if needed. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Secure Connection | Use TLS when connecting to the mail server. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| SSL Version | The TLS version to use. AUTO will try to negotiate a working version. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Verify SSL Certificates | Checks the TLS certificate for validity. If you use a self-signed certificate, turn this option off. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Log File | The log file of the Monit process. This can be the keyword ``syslog`` or a path to a file. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| State File | The state file of the Monit process. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Eventqueue Path | The path to the eventqueue directory. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Eventqueue Slots | The number of eventqueue slots. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Enable HTTPD | Turns on the Monit web interface. (Required to see options below.) |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Monit HTTPD Port | The listen port of the Monit web interface service. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| Monit HTTPD Access List | The username:password or host/network etc. for accessing the Monit web interface service. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| M/Monit URL | The M/Monit URL, e.g. https://user:pass@192.168.1.10:8443/collector |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| M/Monit Timeout | When doing requests to M/Monit, time out after this amount of seconds. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
| M/Monit Register Credentials | Automatically register in M/Monit by sending Monit credentials (see Monit Access List above). |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------+
|
|
|
|
In the “Mail Server” settings, you can specify multiple servers. Monit will try the mail servers in order,
|
|
starting with the first, advancing to the second if the first server does not work, etc.
|
|
If no server works Monit will not attempt to send the e-mail again.
|
|
|
|
**Two things to keep in mind**:
|
|
the authentication settings are shared between all the servers, and the 'From:' address is set in the “Alert Settings”.
|
|
|
|
Authentication options for the Monit web interface are described in
|
|
https://mmonit.com/monit/documentation/monit.html#Authentication.
|
|
|
|
M/Monit is a commercial service to collect data from several Monit instances. To use it from OPNsense, fill in the
|
|
appropriate fields and add corresponding firewall rules as well.
|
|
|
|
^^^^^^^^^^^^^^
|
|
Alert Settings
|
|
^^^^^^^^^^^^^^
|
|
|
|
This lists the e-mail addresses to report to. Click the Edit icon of a pre-existing entry or the Add icon
|
|
(a plus sign in the lower right corner) to see the options listed below.
|
|
|
|
+-------------------------------+----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Setting | Description |
|
|
+===============================+========================================================================================================================================+
|
|
| Enable alert | Turns this alert on or off. |
|
|
+-------------------------------+----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Recipient | The e-mail address to send this e-mail to. |
|
|
+-------------------------------+----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Not on | When off, notifications will be sent for events specified below. When on, notifications will be sent for events *not* specified below. |
|
|
+-------------------------------+----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Events | Events that trigger this notification (or that don't, if "Not on" is selected). |
|
|
+-------------------------------+----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Mail format | Can be used to control the mail formatting and from address. See below this table. |
|
|
+-------------------------------+----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Reminder | Send a reminder if the problem still persists after this amount of checks. |
|
|
+-------------------------------+----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Description | A description for this rule, in order to easily find it in the Alert Settings list. |
|
|
+-------------------------------+----------------------------------------------------------------------------------------------------------------------------------------+
|
|
|
|
“Mail format” is a newline-separated list of properties to control the mail formatting. It is also needed to correctly
|
|
set the From address. For example::
|
|
|
|
From: sender@example.com
|
|
Reply-To: support@example.com
|
|
Subject: $SERVICE at $HOST failed
|
|
|
|
|
|
^^^^^^^^^^^^^^^^
|
|
Service Settings
|
|
^^^^^^^^^^^^^^^^
|
|
|
|
This lists the services that are set. There are some services precreated, but you add as many as you like. Click the Edit
|
|
icon of a pre-existing entry or the Add icon (a plus sign in the lower right corner) to see the options listed below.
|
|
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Setting | Description |
|
|
+===============================+=========================================================================================================================================+
|
|
| Enable service checks | Turns this service on or off. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Name | A name for this service, consisting of only letters, digits and underscore. More descriptive names can be set in the Description field. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Type | The kind of object to check. 'Custom' allows you to use custom scripts. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Path | The path to the directory, file, or script, where applicable. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Program Timeout | How often to run this check. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Start | The start script of the service, if applicable. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Stop | The stop script of the service, if applicable. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Tests | The condition to test on to determine if an alert needs to get sent. These conditions are created on the Service Test Settings tab. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Description | A description for this service, in order to easily find it in the Service Settings list. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^
|
|
Service Test Settings
|
|
^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
+-------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Setting | Description |
|
|
+===============================+===================================================================================================================================================+
|
|
| Name | The name of the test. |
|
|
+-------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Condition | A condition that adheres to the Monit syntax, see `the Monit documentation <https://mmonit.com/monit/documentation/monit.html#SERVICE-TESTS>`_ |
|
|
+-------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Action | What to do when the condition gets hit. |
|
|
+-------------------------------+---------------------------------------------------------------------------------------------------------------------------------------------------+
|
|
|
|
There are some precreated service tests. Most of these are typically used for one scenario, like the
|
|
'Memory usage > 75%' test. Some, however, are more generic and can be used to test output of your own scripts.
|
|
These include:
|
|
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| Service Test | Description |
|
|
+===============================+=========================================================================================================================================+
|
|
| NonZeroStatus | The returned status code is not 0. (Scripts typically exit with 0 if there were no problems, and with non-zero if there were.) |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
| ChangedStatus | The returned status code has changed since the last it the script was run. |
|
|
+-------------------------------+-----------------------------------------------------------------------------------------------------------------------------------------+
|
|
|
|
------
|
|
Status
|
|
------
|
|
|
|
The Monit status panel can be accessed via :menuselection:`Services --> Monit --> Status`. For every active service, it will show the status,
|
|
along with extra information if the service provides it.
|