mirror of
https://github.com/opnsense/docs
synced 2024-11-18 21:28:29 +00:00
650 lines
30 KiB
ReStructuredText
650 lines
30 KiB
ReStructuredText
=====================
|
|
Setup Traffic Shaping
|
|
=====================
|
|
|
|
For this how-to we will look into these scenarios:
|
|
|
|
#. Reserve dedicated bandwidth for a realtime traffic such as (hosted) Voice Over IP (VOIP) server.
|
|
#. Share internet bandwidth amongst users evenly
|
|
#. Limit maximum internet bandwidth users can consume
|
|
#. Prioritize Applications (Weighted) using Queues
|
|
#. Multi Interface shaping for a GuestNet
|
|
|
|
---------------------------
|
|
Reserve dedicated bandwidth
|
|
---------------------------
|
|
In this scenario we will create a pipe dedicated for traffic going to and coming
|
|
from our realtime application. For the sample we presume a SIP trunk or hosted
|
|
Voice Over IP (VOIP) server.
|
|
|
|
For this example we presume a requirement of 4 uncompressed voice channels of 64 kbps,
|
|
resulting in a total bandwidth of 256 kbps. The internet connection in this example
|
|
has 10 Mbps Download and 1 Mbps Upload.
|
|
|
|
|
|
|
|
.. nwdiag::
|
|
:scale: 100%
|
|
:caption: Shaping hosted VOIP / SIP trunk sample
|
|
|
|
nwdiag {
|
|
|
|
span_width = 90;
|
|
node_width = 180;
|
|
Internet [shape = "cisco.cloud"];
|
|
ip_phone [label="IP Phone",shape="cisco.ip_phone"];
|
|
ip_phone -- switchlan;
|
|
|
|
network LAN {
|
|
switchlan [label="",shape = "cisco.workgroup_switch"];
|
|
label = "LAN OPNsense";
|
|
address ="192.168.1.x/24";
|
|
fw1 [label="OPNsense",address="192.168.1.1/24"];
|
|
}
|
|
|
|
network WAN {
|
|
label = ".WAN OPNsense";
|
|
fw1 [label="OPNsense", shape = "cisco.firewall", address="172.10.1.1/32"];
|
|
Internet;
|
|
}
|
|
|
|
network SIPHOST {
|
|
label = ".WAN SIP PROVIDER";
|
|
Internet;
|
|
sip_server [label="SIP/VOIP Server",shape="cisco.sip_proxy_werver", address="172.10.2.1/32"];
|
|
}
|
|
}
|
|
|
|
To start go to :menuselection:`Firewall --> Shaper --> Settings`.
|
|
|
|
Step 1 - Create Upload and Download Pipes
|
|
-----------------------------------------
|
|
On the **Pipes** tab click the **+** button in the lower right corner.
|
|
An empty **Edit Pipe** screen will popup.
|
|
|
|
Create Pipe For Upload (To our VOIP Server)
|
|
|
|
====================== ================ ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 256 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Kbit/s *Metric to use with the numeric value*
|
|
**mask** (Empty) *Used for auto queueing, empty for our sample*
|
|
**description** PipeUp-256kbps *Free field, enter something descriptive*
|
|
====================== ================ ================================================
|
|
|
|
Create Pipe For Upload (Other Traffic = 1024 kbps - 256 kbps = 768 kbps)
|
|
|
|
====================== ================ ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 768 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Kbit/s *Metric to use with the numeric value*
|
|
**mask** (Empty) *Used for auto queueing, empty for our sample*
|
|
**description** PipeUp-768kbps *Free field, enter something descriptive*
|
|
====================== ================ ================================================
|
|
|
|
Create Pipe For Download (From our VOIP Server)
|
|
|
|
====================== ================== ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 256 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Kbit/s *Metric to use with the numeric value*
|
|
**mask** (Empty) *Used for auto queueing, empty for our sample*
|
|
**description** PipeDown-256kbps *Free field, enter something descriptive*
|
|
====================== ================== ================================================
|
|
|
|
Create Pipe For Download (Other Traffic = 10240 kbps - 256 kbps = 9984 kbps )
|
|
|
|
====================== =================== ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 9984 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Kbit/s *Metric to use with the numeric value*
|
|
**mask** (Empty) *Used for auto queueing, empty for our sample*
|
|
**description** PipeDown-9984kbps *Free field, enter something descriptive*
|
|
====================== =================== ================================================
|
|
|
|
Step 2 - Create Rules
|
|
----------------------
|
|
On the **Rules** tab click the **+** button in the lower right corner.
|
|
An empty **Edit rule** screen will popup.
|
|
|
|
Create a rule for traffic directed towards the VOIP Server (Upload).
|
|
|
|
====================== ================= =====================================================
|
|
**sequence** 11 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** any *The source IP to shape, leave on any*
|
|
**src-port** any *The source port to shape, leave on any*
|
|
**destination** 172.10.2.1 *The IP address of our VOIP server*
|
|
**dst-port** any *Use any of the destination port if static*
|
|
**target** PipeUP-256kbps *Select the Upload 256 kbps Pipe*
|
|
**description** ShapeVOIPUpload *Enter a descriptive name*
|
|
====================== ================= =====================================================
|
|
|
|
|
|
Create a rule for traffic coming from the VOIP Server (Download).
|
|
|
|
====================== ================= =====================================================
|
|
**sequence** 21 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** 172.10.2.1 *The IP address of our VOIP server*
|
|
**src-port** any *The source port to shape, leave on any*
|
|
**destination** any *The destination IP to shape, leave on any*
|
|
**dst-port** any *The destination port to shape, leave on any*
|
|
**target** PipeDown256kbps *Select the Download 256 kbps Pipe*
|
|
**description** ShapeVOIPDown *Enter a descriptive name*
|
|
====================== ================= =====================================================
|
|
|
|
Create a rule for all other internet upload traffic
|
|
|
|
====================== ================= =====================================================
|
|
**sequence** 31 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** 192.168.1.0/24 *The source IPs to shape, our LAN network*
|
|
**src-port** any *The source port to shape, leave on any*
|
|
**destination** any *the destination address, leave in any*
|
|
**dst-port** any *Use any of the destination port if static*
|
|
**target** PipeUp-768kbps *Select the Upload 768 kbps Pipe*
|
|
**description** ShapeUpload *Enter a descriptive name*
|
|
====================== ================= =====================================================
|
|
|
|
|
|
Create a rule for all other internet download traffic
|
|
|
|
====================== =================== =====================================================
|
|
**sequence** 41 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** any *The source IP to shape, leave on any*
|
|
**src-port** any *The source port to shape, leave on any*
|
|
**destination** 192.168.1.0/24 *The destination IPs to shape, our LAN network*
|
|
**dst-port** any *The destination port to shape, leave on any*
|
|
**target** PipeDown-9984kbps *Select the Download 256Kbps Pipe*
|
|
**description** ShapeDown *Enter a descriptive name*
|
|
====================== =================== =====================================================
|
|
|
|
.. Note::
|
|
|
|
Be aware of the sequence! It is important to make sure the right traffic
|
|
is passed to the right pipe.
|
|
|
|
|
|
Now press |apply| to activate the traffic shaping rules.
|
|
|
|
*Screenshot Rules*
|
|
|
|
.. image:: images/shaping_rules_s1.png
|
|
:width: 100%
|
|
|
|
.. |apply| image:: images/applybtn.png
|
|
|
|
|
|
----------------------
|
|
Share bandwidth evenly
|
|
----------------------
|
|
|
|
For this example we presume an internet connection of 10 Mbps Download and 1 Mbps
|
|
Upload that we want to share evenly between all users.
|
|
|
|
.. nwdiag::
|
|
:scale: 100%
|
|
:caption: Shaping hosted VOIP / SIP trunk sample
|
|
|
|
nwdiag {
|
|
|
|
span_width = 90;
|
|
node_width = 180;
|
|
Internet [shape = "cisco.cloud"];
|
|
pc [label="Connected PC's",shape="cisco.pc"];
|
|
pc -- switchlan;
|
|
|
|
network LAN {
|
|
switchlan [label="",shape = "cisco.workgroup_switch"];
|
|
label = "LAN OPNsense";
|
|
address ="192.168.1.x/24";
|
|
fw1 [label="OPNsense",address="192.168.1.1/24"];
|
|
}
|
|
|
|
network WAN {
|
|
label = ".WAN OPNsense";
|
|
fw1 [label="OPNsense", shape = "cisco.firewall", address="172.10.1.1/32"];
|
|
Internet;
|
|
}
|
|
|
|
}
|
|
|
|
To start go to :menuselection:`Firewall --> Traffic Shaper --> Settings`.
|
|
|
|
Step 1 - Create Upload and Download Pipes
|
|
-----------------------------------------
|
|
On the **Pipes** tab click the **+** button in the lower right corner.
|
|
An empty **Edit Pipe** screen will popup.
|
|
|
|
Create Pipe For Upload
|
|
|
|
====================== ================ ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 1 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Mbit/s *Metric to use with the numeric value*
|
|
**mask** empty *Select destination to share the bandwidth*
|
|
**description** PipeUp-1Mbps *Free field, enter something descriptive*
|
|
====================== ================ ================================================
|
|
|
|
|
|
Create Pipe For Download
|
|
|
|
====================== ================== ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 10 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Mbit/s *Metric to use with the numeric value*
|
|
**mask** empty *Select destination to share the bandwidth*
|
|
**description** PipeDown-10Mbps *Free field, enter something descriptive*
|
|
====================== ================== ================================================
|
|
|
|
Step 2 - Create a Queues
|
|
------------------------
|
|
On the **Queues** tab click the **+** button in the lower right corner.
|
|
An empty **Edit queue** screen will popup.
|
|
|
|
Create Queue for Upload
|
|
|
|
====================== ================== ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**pipe** PipeUp-1Mbps *Select our Pipe*
|
|
**weight** 100 *Weight to use with the numeric value*
|
|
**mask** source *Every source creates a match*
|
|
**description** QueueUp-1Mbps *Free field, enter something descriptive*
|
|
====================== ================== ================================================
|
|
|
|
Create Queue for Download
|
|
|
|
====================== ================== ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**pipe** PipeDown-10Mbps *Select our Pipe*
|
|
**weight** 100 *Weight to use with the numeric value*
|
|
**mask** destination *Every source creates a match*
|
|
**description** QueueDown-10Mbps *Free field, enter something descriptive*
|
|
====================== ================== ================================================
|
|
|
|
|
|
Step 3 - Create Rules
|
|
----------------------
|
|
On the **Rules** tab click the **+** button in the lower right corner.
|
|
An empty **Edit rule** screen will popup.
|
|
|
|
Create a rule for traffic directed towards the internet (Upload).
|
|
|
|
====================== ================= =====================================================
|
|
**sequence** 11 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** 192.168.1.0/24 *The source IP to shape, select the LAN network*
|
|
**src-port** any *The source port to shape, leave on any*
|
|
**destination** any *The destination to shape, leave on any*
|
|
**dst-port** any *Use any of the destination port if static*
|
|
**target** QueueUp-1Mbps *Select the Upload 1Mbps Queue*
|
|
**description** ShapeUpload *Enter a descriptive name*
|
|
====================== ================= =====================================================
|
|
|
|
|
|
Create a rule for traffic coming from the internet (Download).
|
|
|
|
====================== ================= =====================================================
|
|
**sequence** 21 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** any *The source address, leave on any*
|
|
**src-port** any *The source port to shape, leave on any*
|
|
**destination** 192.168.1.0/24 *The destination IP to shape, select LAN network*
|
|
**dst-port** any *The destination port to shape, leave on any*
|
|
**target** QueueDown-10Mbps *Select the Download 10 Mbps Queue*
|
|
**description** ShapeDownload *Enter a descriptive name*
|
|
====================== ================= =====================================================
|
|
|
|
Now press |apply| to activate the traffic shaping rules.
|
|
|
|
*Screenshot Rules*
|
|
|
|
.. image:: images/shaping_rules_s2.png
|
|
:width: 100%
|
|
|
|
------------------------
|
|
Limit bandwidth per user
|
|
------------------------
|
|
|
|
For this example we will divide the internet Download traffic between the connected
|
|
users in such manner that each user will receive up to a maximum of 1 Mbps.
|
|
|
|
.. nwdiag::
|
|
:scale: 100%
|
|
:caption: Simple network diagram
|
|
|
|
nwdiag {
|
|
|
|
span_width = 90;
|
|
node_width = 180;
|
|
Internet [shape = "cisco.cloud"];
|
|
pc [label="Connected PC's",shape="cisco.pc"];
|
|
pc -- switchlan;
|
|
|
|
network LAN {
|
|
switchlan [label="",shape = "cisco.workgroup_switch"];
|
|
label = "LAN OPNsense";
|
|
address ="192.168.1.x/24";
|
|
fw1 [label="OPNsense",address="192.168.1.1/24"];
|
|
}
|
|
|
|
network WAN {
|
|
label = ".WAN OPNsense";
|
|
fw1 [label="OPNsense", shape = "cisco.firewall", address="172.10.1.1/32"];
|
|
Internet;
|
|
}
|
|
|
|
}
|
|
|
|
To start go to :menuselection:`Firewall --> Traffic Shaper --> Settings`.
|
|
|
|
Step 1 - Create Upload and Download Pipes
|
|
-----------------------------------------
|
|
On the **Pipes** tab click the **+** button in the lower right corner.
|
|
An empty **Edit Pipe** screen will popup.
|
|
|
|
Create Pipe For Download
|
|
|
|
====================== ================ ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 1 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Mbit/s *Metric to use with the numeric value*
|
|
**mask** destination *Select source to limit bandwidth per client*
|
|
**description** PipeDown-1Mbps *Free field, enter something descriptive*
|
|
====================== ================ ================================================
|
|
|
|
|
|
Step 2 - Create Rules
|
|
----------------------
|
|
On the **Rules** tab click the **+** button in the lower right corner.
|
|
An empty **Edit rule** screen will popup.
|
|
|
|
|
|
Create a rule for traffic coming from the internet (Download).
|
|
|
|
====================== ================= =====================================================
|
|
**sequence** 21 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** any *The source address, leave on any*
|
|
**src-port** any *The source port to shape, leave on any*
|
|
**destination** 192.168.1.0/24 *The destination IP to shape, select LAN network*
|
|
**dst-port** any *The destination port to shape, leave on any*
|
|
**target** PipeDown-1Mbps *Select the Download 1 Mbps Pipe*
|
|
**description** ShapeDownload *Enter a descriptive name*
|
|
====================== ================= =====================================================
|
|
|
|
.. Note::
|
|
|
|
If you want to limit traffic for a single IP then just enter the IP address
|
|
in the destination field instead of the full LAN network range.
|
|
|
|
Now press |apply| to activate the traffic shaping rules.
|
|
|
|
*Screenshot Rules*
|
|
|
|
.. image:: images/shaping_rules_s3.png
|
|
:width: 100%
|
|
|
|
-----------------------
|
|
Prioritize using Queues
|
|
-----------------------
|
|
By utilizing queues we can influence the bandwidth within a pipe and give certain
|
|
applications more bandwidth than others based on a weighted algorithm.
|
|
|
|
The idea is simple:
|
|
Let presume we have a pipe of 10 Mbps and 2 applications for instance smtp (email)
|
|
and http(s). The http(s) traffic will get a weight of 1 and the smtp traffic a
|
|
weight of 9, then when all capacity of our pipe is in use the email traffic will
|
|
get 9x more bandwidth than our http(s) traffic, resulting in 1 Mbps for http(s)
|
|
and 9 Mbps for smtp.
|
|
|
|
For our example we only look at download traffic, but the exact same can be done
|
|
for the upload traffic.
|
|
|
|
+----------------+--------+-------------------+
|
|
| Application | Weight | Minimum Bandwidth |
|
|
+================+========+===================+
|
|
| SMTP (port 25) | 9 | 9 Mbps |
|
|
+----------------+--------+-------------------+
|
|
| HTTP (80) | | |
|
|
+----------------+ 1 | 1 Mbps |
|
|
| HTTPS (443) | | |
|
|
+----------------+--------+-------------------+
|
|
|
|
To start go to :menuselection:`Firewall --> Traffic Shaper --> Settings`.
|
|
|
|
Step 1 - Create Download Pipe
|
|
------------------------------
|
|
On the **Pipes** tab click the **+** button in the lower right corner.
|
|
An empty **Edit Pipe** screen will popup.
|
|
|
|
|
|
Create Pipe For Download (10 Mbps)
|
|
|
|
====================== ================= ===============================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 10 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Mbit/s *Metric to use with the numeric value*
|
|
**mask** (empty) *Leave empty*
|
|
**description** PipeDown-10Mbps *Free field, enter something descriptive*
|
|
====================== ================= ===============================================
|
|
|
|
|
|
Step 2 - Create Queues
|
|
----------------------
|
|
On the **Queues** tab click the **+** button in the lower right corner.
|
|
An empty **Edit queue** screen will popup.
|
|
|
|
Create Queue for SMTP
|
|
|
|
====================== ================== ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**pipe** PipeDown-10Mbps *Select our Pipe*
|
|
**weight** 9 *Weight to use with the numeric value*
|
|
**mask** (empty) *Leave empty*
|
|
**description** Queue-SMTP *Free field, enter something descriptive*
|
|
====================== ================== ================================================
|
|
|
|
|
|
Create Queue for HTTP
|
|
|
|
====================== ================== ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**pipe** PipeDown-10Mbps *Select our Pipe*
|
|
**weight** 1 *Weight to use with the numeric value*
|
|
**mask** (empty) *Leave empty*
|
|
**description** Queue-HTTP *Free field, enter something descriptive*
|
|
====================== ================== ================================================
|
|
|
|
Step 3 - Create Rules
|
|
----------------------
|
|
On the **Rules** tab click the **+** button in the lower right corner.
|
|
An empty **Edit rule** screen will popup.
|
|
|
|
|
|
Create a rule for smtp download traffic (email)
|
|
|
|
====================== =================== =====================================================
|
|
**sequence** 11 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** any *The source address, leave on any*
|
|
**src-port** smtp *The source port to shape, smtp or 25*
|
|
**destination** any *The destination IP to shape, leave on any*
|
|
**dst-port** any *The destination port to shape, leave on any*
|
|
**target** Queue-SMTP *Select the SMTP queue*
|
|
**description** ShapeSMTPDownload *Enter a descriptive name*
|
|
====================== =================== =====================================================
|
|
|
|
|
|
Create a rule for HTTP download traffic
|
|
|
|
====================== =================== =====================================================
|
|
**sequence** 21 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** any *The source address, leave on any*
|
|
**src-port** http *The source port to shape, http or 80*
|
|
**destination** any *The destination IP to shape, leave on any*
|
|
**dst-port** any *The destination port to shape, leave on any*
|
|
**target** Queue-HTTP *Select the HTTP queue*
|
|
**description** ShapeHTTPDownload *Enter a descriptive name*
|
|
====================== =================== =====================================================
|
|
|
|
|
|
Adding an extra rule for HTTPS traffic is simple as we can use the same HTTP queue if we like:
|
|
|
|
====================== ==================== =====================================================
|
|
**sequence** 31 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** any *The source address, leave on any*
|
|
**src-port** https *The source port to shape, https or 443*
|
|
**destination** any *The destination IP to shape, leave on any*
|
|
**dst-port** any *The destination port to shape, leave on any*
|
|
**target** Queue-HTTP *Select the HTTP queue*
|
|
**description** ShapeHTTPSDownload *Enter a descriptive name*
|
|
====================== ==================== =====================================================
|
|
|
|
This way HTTP and HTTPS traffic will be treated the same (total max of 1 Mbps).
|
|
|
|
Now press |apply| to activate the traffic shaping rules.
|
|
|
|
*Screenshot Rules*
|
|
|
|
.. image:: images/shaping_rules_s4.png
|
|
:width: 100%
|
|
|
|
--------------------------------------
|
|
Multi Interface shaping for a GuestNet
|
|
--------------------------------------
|
|
|
|
One of the options with OPNsense's traffic shaper is its ability to add shaping
|
|
rules based upon two interfaces. This option allows you to shape traffic
|
|
differently based on the direction the traffic is moving between interfaces.
|
|
|
|
For this example we will use this functionality to share a symmetric 10 Mbps internet
|
|
connection between a primary LAN network and a Guest Network.
|
|
|
|
The LAN network will not be limited, traffic from users on our Guest Network will
|
|
be limited to a total of 2 Mbps Download and 1 Mbps Upload.
|
|
|
|
.. nwdiag::
|
|
:scale: 100%
|
|
:caption: Simple network diagram
|
|
|
|
nwdiag {
|
|
|
|
span_width = 90;
|
|
node_width = 180;
|
|
Internet [shape = "cisco.cloud"];
|
|
Internet -- switchwan;
|
|
|
|
network WAN {
|
|
switchwan [label="",shape = "cisco.workgroup_switch"];
|
|
label = "WAN Interface em1";
|
|
fw1 [label="OPNsense", shape = "cisco.firewall", address="172.10.1.1/32"];
|
|
}
|
|
|
|
network LAN {
|
|
switchlan [label="",shape = "cisco.workgroup_switch"];
|
|
label = "LAN Interface em0";
|
|
address ="192.168.1.x/24";
|
|
fw1 [label="OPNsense",address="192.168.1.1/24"];
|
|
}
|
|
|
|
pc [label="LAN PC",shape="cisco.pc"];
|
|
pc -- switchlan;
|
|
|
|
network GuestNet {
|
|
switchguestnet [label="",shape = "cisco.workgroup_switch"];
|
|
label = "GuestNet Interface em2";
|
|
address ="192.168.2.x/24";
|
|
fw1 [label="OPNsense",address="192.168.2.1/24"];
|
|
}
|
|
|
|
laptop [label="Guest Laptop", shape="cisco.laptop"]
|
|
laptop -- switchguestnet;
|
|
|
|
}
|
|
|
|
Step 1 - Create Upload and Download Pipes
|
|
-----------------------------------------
|
|
|
|
On the **Pipes** tab click the **+** button in the lower right corner.
|
|
An empty **Edit Pipe** screen will popup.
|
|
|
|
Create Pipe For Upload (GuestNet - em2)
|
|
|
|
====================== ================ ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 1 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Mbit/s *Metric to use with the numeric value*
|
|
**mask** (Empty) *Leave empty*
|
|
**description** PipeUp-1Mbps *Free field, enter something descriptive*
|
|
====================== ================ ================================================
|
|
|
|
|
|
Create Pipe For Download (GuestNet - em2)
|
|
|
|
====================== ================== ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 2 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Mbit/s *Metric to use with the numeric value*
|
|
**mask** (Empty) *Leave empty*
|
|
**description** PipeDown-2Mbps *Free field, enter something descriptive*
|
|
====================== ================== ================================================
|
|
|
|
Step 2 - Create Rules
|
|
----------------------
|
|
|
|
On the **Rules** tab click the **+** button in the lower right corner.
|
|
An empty **Edit rule** screen will popup.
|
|
|
|
Important - Before you continue!
|
|
First change the mode to advanced, see the toggle in the left top corner of the
|
|
popup dialog. One click should shift it from red (disabled) to green (enabled).
|
|
|
|
Create a rule for the download traffic
|
|
|
|
====================== =================== =====================================================
|
|
**sequence** 11 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**interface2** GuestNet *Select the interface that matches your GuestNet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** any *The source address, leave on any*
|
|
**src-port** any *The source port to shape, leave on any*
|
|
**destination** any *The destination IP to shape, leave on any*
|
|
**dst-port** any *The destination port to shape, leave on any*
|
|
**direction** in *Match incoming packages (download)*
|
|
**target** PipeDown-2Mbps *Select the Download pipe*
|
|
**description** GuestNetDownload *Enter a descriptive name*
|
|
====================== =================== =====================================================
|
|
|
|
Create a rule for the upload traffic
|
|
|
|
====================== =================== =====================================================
|
|
**sequence** 21 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface that matches your GuestNet*
|
|
**interface2** GuestNet *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** any *The source address, leave on any*
|
|
**src-port** any *The source port to shape, leave on any*
|
|
**destination** any *The destination IP to shape, leave on any*
|
|
**dst-port** any *The destination port to shape, leave on any*
|
|
**direction** out *Match incoming packages (download)*
|
|
**target** PipeUp-1Mbps *Select the Download pipe*
|
|
**description** GuestNetUpload *Enter a descriptive name*
|
|
====================== =================== =====================================================
|
|
|
|
Now press |apply| to activate the traffic shaping rules.
|