mirror of
https://github.com/opnsense/docs
synced 2024-11-05 06:00:36 +00:00
101 lines
3.8 KiB
ReStructuredText
101 lines
3.8 KiB
ReStructuredText
========================================
|
|
Interfaces: Wireless Networks (INTERNAL)
|
|
========================================
|
|
|
|
This page is about setting up a wireless interface in access point mode to
|
|
create your own WLAN. In this mode, your Laptops and handhelds can connect
|
|
to your OPNsense without an external access point for home and enterprise
|
|
environments. For home networks step over step two and don't setup the
|
|
802.1X service in the network settings.
|
|
For external access point, just create a cabled network (usually Ethernet)
|
|
and connect the access point to the other end.
|
|
|
|
|
|
.. Warning::
|
|
|
|
FreeBSD supports wireless adapters in access point (infrastructure) mode,
|
|
but this functionality is limited to some drivers and there may be some,
|
|
which do not support all options available via the web interface.
|
|
Please make sure that you buy a wireless card that is supported to avoid
|
|
these problems.
|
|
|
|
.. Note::
|
|
|
|
This guide requires the FreeRADIUS plugin to be installed and enabled (via :menuselection:`System --> Firmware --> Plugins` and :menuselection:`Services --> FreeRADIUS --> General`) .
|
|
|
|
Configuration
|
|
=============
|
|
|
|
Step 1
|
|
------
|
|
|
|
Create a wireless clone interface and assign it.
|
|
|
|
|
|
Step 2 - Prepare RADIUS
|
|
-----------------------
|
|
|
|
.. image:: images/interface_wireless_radius_2.png
|
|
|
|
Create a new client, which is the AP.
|
|
For example, name it localhost, choose a secret and the CIDR 127.0.0.0/8.
|
|
The secret is later used in the wireless settings.
|
|
|
|
.. image:: images/interface_wireless_radius_4.png
|
|
|
|
Next, switch to the users menu and create a new user (for example for yourself).
|
|
The username and the password are used to authenticate later.
|
|
The rest of the settings can be left on their defaults.
|
|
|
|
|
|
Step 3 - Prepare WLAN
|
|
---------------------
|
|
|
|
.. image:: images/interface_wireless_radius_1.png
|
|
|
|
======================= ========================================
|
|
Enable Check
|
|
Description WLAN
|
|
IPv4 Configuration Type Static IPv4
|
|
======================= ========================================
|
|
|
|
|
|
======================= ========================================
|
|
IPv4 address A network
|
|
IPv4 Upstream Gateway WLAN
|
|
======================= ========================================
|
|
|
|
|
|
================================ ==========================================================
|
|
Persist common settings Check (save for all clones)
|
|
Standard 802.11g or another standard your adapter supports
|
|
Regulatory settings Choose your country
|
|
Mode Access Point
|
|
SSID Name of the wireless network
|
|
WEP Unchecked
|
|
WPA Checked with your PSK (WLAN password if wanted)
|
|
WPA Mode WPA2
|
|
WPA Key Management Mode Extensible Authentication
|
|
Authentication Open System Authentication
|
|
WPA Pairwise AES
|
|
Enable IEEE802.1X Authentication Check if you want to use RADIUS authentication
|
|
802.1X Server IP Address 127.0.0.1 (if you want RADIUS)
|
|
802.1X Server Port 1812 (if you want RADIUS)
|
|
802.1X Server Shared Secret The password you configured in step 2 (if you want RADIUS)
|
|
================================ ==========================================================
|
|
|
|
Step 4 - Connect
|
|
----------------
|
|
|
|
.. Note::
|
|
This is system specific - this screenshot is for a Linux distribution with
|
|
KDE Plasma Workspaces 5, with the system language set to German.
|
|
|
|
.. image:: images/interface_wireless_radius_3.png
|
|
|
|
|
|
To connect to the network, set the security setting to "WPA/WPA2 Enterprise"
|
|
and the authentication setting to "Protected EAP (PEAP)".
|
|
The inner authentication should be set to MSCHAPv2, and the username and password are the ones you
|
|
set up in the RADIUS plugin.
|