mirror of
https://github.com/opnsense/docs
synced 2024-11-09 01:10:33 +00:00
44 lines
2.5 KiB
ReStructuredText
44 lines
2.5 KiB
ReStructuredText
====================================
|
|
Gateways and monitoring
|
|
====================================
|
|
|
|
The address you are trying to monitor should be reachable using the interface the gateway is attached to, either
|
|
directly or using a static route (check :menuselection:`System --> Routes --> Status`).
|
|
|
|
---------------------------------
|
|
dpinger:.. sendto error: XXX
|
|
---------------------------------
|
|
|
|
Usually found in :menuselection:`System --> Log Files --> General`, every code has a meaning, usually explained in
|
|
`errno.h <https://github.com/opnsense/src/blob/master/sys/sys/errno.h>`__ (:code:`man errno`)
|
|
|
|
Some common ones are explained below:
|
|
|
|
====== ==================== =================================================================================
|
|
XX Name Description
|
|
====== ==================== =================================================================================
|
|
55 ENOBUFS No buffer space available. An operation on a socket or pipe was not performed
|
|
because the system lacked sufficient buffer space or because a queue was full.
|
|
**Check connectivity from the machine itself using** :code:`ping`, most common
|
|
mistakes are misconfigured routes, interface issues (disconnected) and
|
|
policy based routing issues forcing traffic to the wrong target
|
|
(using :code:`reply-to`)
|
|
64 EHOSTDOWN Host is down. A socket operation failed because the destination host was down.
|
|
**Expecting an (layer 2) ARP response but none was returned, often misconfigured
|
|
subnets or hosts are actually not accessible over L2**
|
|
65 EHOSTUNREACH No route to host. A socket operation was attempted to an unreachable host
|
|
**The routing table is a good place to look**
|
|
(:menuselection:`System --> Routes --> Status`)
|
|
====== ==================== =================================================================================
|
|
|
|
------------------------------------------
|
|
arpresolve: can't allocate llinfo for..
|
|
------------------------------------------
|
|
|
|
This message usually means that the configured gateway lies outside the configured subnets for this firewall (for IPv4).
|
|
|
|
.. Tip::
|
|
|
|
Double check the subnets of your interface and virtual IP's, you can also use :menuselection:`Interfaces --> Overview`
|
|
for a quick list of all configured addresses.
|