mirror of
https://github.com/opnsense/docs
synced 2024-11-09 01:10:33 +00:00
366 lines
19 KiB
ReStructuredText
366 lines
19 KiB
ReStructuredText
===========================
|
|
Rules
|
|
===========================
|
|
|
|
OPNsense contains a stateful packet filter, which can be used to restrict or allow traffic from and/or to specific networks
|
|
as well as influence how traffic should be forwarded (see also policy based routing in ":doc:`/manual/how-tos/multiwan`").
|
|
|
|
The rules section shows all policies that apply on your network, grouped by interface.
|
|
|
|
|
|
--------------------
|
|
Overview
|
|
--------------------
|
|
|
|
Our overview shows all the rules that apply to the selected interface (group) or floating section.
|
|
For every rule some details are provided and when applicable you can perform actions, such as move, edit, copy, delete.
|
|
|
|
|
|
.. image:: images/Firewall_overview.png
|
|
:width: 600px
|
|
:align: center
|
|
|
|
Below you will find some highlights about this screen.
|
|
|
|
1. Interface name
|
|
The name of the interface is part of the normal menu breadcrumb
|
|
2. Category
|
|
If categories are used in the rules, you can select which one you will show here.
|
|
3. Toggle inspection
|
|
You can toggle between inspection and rule view here, when in inspection mode, statistics of the rule are shown.
|
|
(such as packet counters, number of active states, ...)
|
|
4. Show / hide automatic rules
|
|
Some rules are automatically generated, you can toggle here to show the details. If a magnifying glass
|
|
is shown you can also browse to its origin (The setting controlling this rule).
|
|
5. Automatic rules
|
|
The contents of the automatic rules
|
|
6. User rules
|
|
All user defined rules
|
|
|
|
|
|
|
|
--------------------
|
|
The basics
|
|
--------------------
|
|
|
|
Before creating rules, it's good to know about some basics which apply to all rules.
|
|
|
|
....................
|
|
States
|
|
....................
|
|
|
|
By default rules are set to stateful (you can change this, but it has consequences), which means that the state of
|
|
a connection is saved into a local dictionary which will be resolved when the next packet comes in.
|
|
The consequence of this is that when a state exists, the firewall doesn't need to process all its rules again to determine
|
|
the action to apply, which has huge performance advantages.
|
|
|
|
The use of states can also improve security particularly in case of tcp type traffic, since packet sequence numbers and timestamps are also checked in order
|
|
to pass traffic, it's much harder to spoof traffic.
|
|
|
|
.. Note::
|
|
When changing rules, sometimes its necessary to reset states to assure the new policies are used for existing traffic.
|
|
You can do this in :menuselection:`Firewall --> Diagnostics --> States Reset` or :menuselection:`Firewall --> Diagnostics --> States Dump`
|
|
to reset specific states.
|
|
|
|
|
|
.. Note::
|
|
In order to keep states, the system need to reserve memory. By default 10% of the system memory is reserved for states,
|
|
this can be configured in :menuselection:`Firewall --> Settings --> Firewall Maximum States`.
|
|
(The help text shows the default number of states on your platform)
|
|
|
|
|
|
....................
|
|
Action
|
|
....................
|
|
|
|
.. _Firewall_Rule_Action:
|
|
|
|
Rules can be set to three different action types:
|
|
|
|
* Pass --> allow traffic
|
|
* Block --> deny traffic and don't let the client know it has been dropped (which is usually advisable for untrusted networks)
|
|
* Reject --> deny traffic and let the client know about it. (only tcp and udp support rejecting packets, which in case of TCP means a :code:`RST` is returned, for UDP :code:`ICMP UNREACHABLE` is returned).
|
|
|
|
For internal networks it can be practical to use reject, so the client does not have to wait for a time-out when access is not allowed.
|
|
When receiving packets from untrusted networks, you usually don't want to communicate back if traffic is not allowed.
|
|
|
|
....................
|
|
Processing order
|
|
....................
|
|
|
|
.. _Firewall_Rule_Processing_Order:
|
|
|
|
Firewall rules are processed in sequence, first evaluating the **Floating** rules section followed by all rules which
|
|
belong to **interface groups** and finally all **interface** rules.
|
|
|
|
Internal (automatic) rules are usually registered first.
|
|
|
|
.. blockdiag::
|
|
:desctable:
|
|
|
|
blockdiag {
|
|
System [label="System defined", style = dotted];
|
|
Floating [label="Floating rules"];
|
|
Groups [label="Interface groups"];
|
|
Interfaces [label="Interfaces"];
|
|
System -> Floating -> Groups -> Interfaces;
|
|
}
|
|
|
|
|
|
Rules can either be set to :code:`quick` or not set to quick, the default is to use quick. When set to quick, the rule is
|
|
handled on "first match" basis, which means that the first rule matching the packet will take precedence over rules following in sequence.
|
|
|
|
When :code:`quick` is not set, last match wins. This can be useful for rules which define standard behaviour.
|
|
Our default deny rule uses this property for example (if no rule applies, drop traffic).
|
|
|
|
|
|
.. Note::
|
|
Internally rules are registered using a priority, floating uses :code:`200000`,
|
|
groups use :code:`300000` and interface rules land on :code:`400000` combined with the order in which they appear.
|
|
Automatic rules are usually registered at a higher priority (lower number).
|
|
|
|
.. Tip::
|
|
|
|
The interface should show all rules that are used, when in doubt, you can always inspect the raw output of the ruleset in :code:`/tmp/rules.debug`
|
|
|
|
|
|
......................
|
|
Direction
|
|
......................
|
|
|
|
.. _Firewall_Rule_Direction:
|
|
|
|
.. blockdiag::
|
|
:desctable:
|
|
|
|
blockdiag {
|
|
source [label="Source"];
|
|
firewall [label="Firewall"];
|
|
destination [label="Destination"];
|
|
source -> firewall [label="in"]
|
|
firewall -> destination [label="out"];
|
|
}
|
|
|
|
|
|
Traffic can be matched on :code:`in[coming]` or :code:`out[going]` direction, our default is to filter on incoming direction.
|
|
In which case you would set the policy on the interface where the traffic originates from.
|
|
|
|
For example, if you want to allow :code:`https` traffic coming from any host on the internet,
|
|
you would usually set a policy on the WAN interface allowing port :code:`443` to the host in question.
|
|
|
|
|
|
.. Note::
|
|
Traffic leaving the firewall is accepted by default (using a non-quick rule), when **Disable force gateway** in
|
|
:menuselection:`Firewall --> Settings --> Advanced` is not checked, the connected gateway would be enforced as well.
|
|
|
|
|
|
--------------------
|
|
Settings
|
|
--------------------
|
|
|
|
Traffic that is flowing through your firewall can be allowed or denied using rules, which define policies.
|
|
This section of the documentation describe the different settings, grouped by usage.
|
|
|
|
.......................
|
|
Descriptive settings
|
|
.......................
|
|
|
|
Some settings help to identify rules, without influencing traffic flow.
|
|
|
|
=====================================================================================================================
|
|
|
|
==================================== ===============================================================================
|
|
Category The category this rule belongs to, can be used as a filter in the overview
|
|
Description Descriptive text
|
|
==================================== ===============================================================================
|
|
|
|
|
|
.................
|
|
Basic settings
|
|
.................
|
|
|
|
Below are the settings most commonly used:
|
|
|
|
=====================================================================================================================
|
|
|
|
==================================== ===============================================================================
|
|
Action The :ref:`action <Firewall_Rule_Action>` to perform.
|
|
Disabled Disable a rule without removing it, can be practical for testing purposes and
|
|
to support easy enablement of less frequently used policies.
|
|
Interface Interface[s] this rule applies on. You can easily copy rules between interfaces
|
|
and change this field to the new target interface.
|
|
(remember to check the order before applying)
|
|
TCP/IP Version Does this rule apply on IPv4, IPv6 or both.
|
|
Protocol Protocol to use, most common are TCP and UDP
|
|
Source Source network or address, when combining IPv4 and IPv6 in one rule, you can use
|
|
aliases which contain both address families.
|
|
Source / Invert Invert source selection (for example not 192.168.0.0/24)
|
|
Destination Destination network or address, like source you can use aliases here as well.
|
|
Destination / Invert When the filter should be inverted, you can mark this checkbox
|
|
Destination port range For TCP and/or UDP you can select a service by name (http, https)
|
|
or number (range), you can also use aliases here to simplify management.
|
|
Log Create a log entry when this rule applies, you can use
|
|
:menuselection:`Firewall --> Log Files --> Live View` to monitor if your rule
|
|
applies.
|
|
==================================== ===============================================================================
|
|
|
|
|
|
.. Tip::
|
|
|
|
The use of descriptive names help identify traffic in the live log view easily.
|
|
|
|
.. Tip::
|
|
|
|
.. raw:: html
|
|
|
|
<i class="fa fa-eye"></i>
|
|
With the use of the eye button in the right top corner of the screen you can find statistics about the rule in
|
|
question (number of evaluations, number of active states and traffic counters).
|
|
|
|
|
|
.....................
|
|
Less commonly used
|
|
.....................
|
|
|
|
Some settings are usually best left default, but can also be set in the normal rule configuration.
|
|
|
|
=====================================================================================================================
|
|
|
|
==================================== ===============================================================================
|
|
Source port range In case of TCP and/or UDP, you can also filter on the source port (range) that is
|
|
used by the client. Since in most cases you can't influence the source port,
|
|
this setting is usually kept default (:code:`any`).
|
|
Quick If a packet matches a rule specifying quick, the first matching rule wins.
|
|
When not set to quick the last matching rule wins. When not sure, best use
|
|
quick rules and interpret the ruleset from top to bottom.
|
|
Direction Direction of the traffic,
|
|
see also :ref:`Direction <Firewall_Rule_Direction>`.
|
|
==================================== ===============================================================================
|
|
|
|
...................
|
|
High Availability
|
|
...................
|
|
|
|
The following options are specifically used for HA setups.
|
|
|
|
=====================================================================================================================
|
|
|
|
==================================== ===============================================================================
|
|
No XMLRPC Sync Disable configuration sync for this rule, when **Firewall Rules** sync is
|
|
enabled in :menuselection:`System --> High Availability --> Settings`
|
|
State Type / NO pfsync Prevent states created by this rule to be synced to the other node
|
|
==================================== ===============================================================================
|
|
|
|
|
|
|
|
....................
|
|
Schedule
|
|
....................
|
|
|
|
Rules can also be scheduled to be active at specific days or time ranges, you can create schedules in
|
|
:menuselection:`Firewall --> Advanced --> Schedules` and select one in the rule.
|
|
|
|
|
|
......................
|
|
Policy based routing
|
|
......................
|
|
|
|
This feature can be used to forward traffic to another gateway based on more fine grained filters than static routes
|
|
could (`OSI layer 4 verses OSI layer 3 <https://en.wikipedia.org/wiki/OSI_model>`__) and can be used to build multi-wan scenario's using gateway groups.
|
|
|
|
More information about Multi-Wan can be found in the ":doc:`/manual/how-tos/multiwan`" chapter.
|
|
|
|
=====================================================================================================================
|
|
|
|
==================================== ===============================================================================
|
|
Gateway When a gateway is specified, packets will use policy based routing using
|
|
the specified gateway or gateway group. Usually this option is set on the
|
|
receiving interface (LAN for example), which then chooses the gateway
|
|
specified here. (This ignores default routing rules)
|
|
disable reply-to By default traffic is always send to the connected gateway on the interface.
|
|
If for some reason you don't want to force traffic to that gateway, you
|
|
can disable this behaviour.
|
|
==================================== ===============================================================================
|
|
|
|
|
|
.. Note::
|
|
|
|
When using policy based routing, don't forget to exclude local traffic which shouldn't be forwarded.
|
|
You can do so by creating a rule with a higher priority, using a :code:`default` gateway.
|
|
|
|
....................
|
|
Connection limits
|
|
....................
|
|
|
|
|
|
The advanced options contains some settings to limit the use of a rule or specify specific timeouts for
|
|
the it. Most generic (default) settings for these options can be found under :menuselection:`Firewall --> Settings --> Advanced`
|
|
|
|
=====================================================================================================================
|
|
|
|
==================================== ===============================================================================
|
|
Max states Limits the number of concurrent states the rule may create.
|
|
When this limit is reached, further packets that would create state will
|
|
not match this rule until existing states time out.
|
|
Max source nodes Limits the maximum number of source addresses which can simultaneously
|
|
have state table entries.
|
|
Max established Limits the maximum number of simultaneous TCP connections which have
|
|
completed the 3-way handshake that a single host can make.
|
|
Max source states Limits the maximum number of simultaneous state entries that
|
|
a single source address can create with this rule.
|
|
Max new connections Limit the rate of new connections over a time interval. The
|
|
connection rate is an approximation calculated as a moving average.
|
|
(number of connections / seconds) Only applies on TCP connections
|
|
State timeout State Timeout in seconds (applies to TCP only)
|
|
==================================== ===============================================================================
|
|
|
|
|
|
....................
|
|
Advanced
|
|
....................
|
|
|
|
Some less common used options are defined below.
|
|
|
|
=====================================================================================================================
|
|
|
|
==================================== ===============================================================================
|
|
Source OS Operating systems can be fingerprinted based on some tcp fields from
|
|
the originating connection. These fingerprints can be used as well
|
|
to match traffic on. (more detailed information can be found in the
|
|
`pf.os <https://www.freebsd.org/cgi/man.cgi?query=pf.os>`__ man page)
|
|
allow options By default the firewall blocks IPv4 packets with IP options or IPv6
|
|
packets with routing extension headers set.
|
|
If you have an application that requires such packets
|
|
(such as multicast or IGMP)
|
|
you can enable this option.
|
|
TCP flags If specific TCP flags need to be set or unset, you can specify those here.
|
|
Set priority Packets matching this rule will be assigned a specific queueing priority.
|
|
If the packet is transmitted on a VLAN interface, the queueing priority
|
|
will be written as the priority code point in the 802.1Q VLAN
|
|
header. If two priorities are given, packets which have a TOS of
|
|
lowdelay and TCP ACKs with no data payload will be assigned to the second one.
|
|
Match priority Only match packets which have the given queueing priority assigned.
|
|
Set local tag Packets matching this rule will be tagged with the specified string.
|
|
The tag acts as an internal marker that can be used to identify these
|
|
packets later on. This can be used, for example, to provide trust between
|
|
interfaces and to determine if packets have been processed by translation rules.
|
|
Tags are “sticky”, meaning that the packet will be tagged even
|
|
if the rule is not the last matching rule.
|
|
Further matching rules can replace the tag with a new one but will not
|
|
remove a previously applied tag. A packet is only ever assigned
|
|
one tag at a time.
|
|
Match local tag Match packets that are tagged earlier (using set local tag)
|
|
State Type Influence the state tracking mechanism used, the following options are available.
|
|
When in doubt, it's usually best to preserve the default :code:`keep state`
|
|
|
|
* Keep state :menuselection:`-->` is used for stateful connection tracking.
|
|
* Sloppy state :menuselection:`-->` works like keep state,
|
|
but it does not check sequence numbers.
|
|
Use it when the firewall does not see all packets.
|
|
* Synproxy state :menuselection:`-->` proxies incoming TCP connections to help
|
|
protect servers from spoofed TCP SYN floods.
|
|
This option includes the functionality of keep state
|
|
and modulate state combined.
|
|
* None :menuselection:`-->` Do not use state mechanisms to keep track.
|
|
==================================== ===============================================================================
|