mirror of
https://github.com/opnsense/docs
synced 2024-11-15 06:12:58 +00:00
124 lines
4.3 KiB
ReStructuredText
124 lines
4.3 KiB
ReStructuredText
=====================================
|
||
High Availability
|
||
=====================================
|
||
OPNsense utilizes the Common Address Redundancy Protocol or CARP for hardware
|
||
failover. Two or more firewalls can be configured as a failover group. If one
|
||
interface fails on the primary or the primary goes offline entirely, the
|
||
secondary becomes active.
|
||
|
||
Utilizing this powerful feature of OPNsense creates a fully redundant firewall
|
||
with automatic and seamless fail-over. While switching to the backup network
|
||
connections will stay active with minimal interruption for the users.
|
||
|
||
.. image:: images/light_bulbs.png
|
||
:width: 100%
|
||
|
||
|
||
-----------------------------
|
||
Workflow
|
||
-----------------------------
|
||
|
||
Although its not required to synchronize the configuration from the master machine to the backup, a lot of people
|
||
would like to keep both systems (partially) the same.
|
||
|
||
To prevent issues spreading over both machines at the same time, we choose to only update on command (see the status page).
|
||
|
||
Our workflow looks like this:
|
||
|
||
.. blockdiag::
|
||
:desctable:
|
||
|
||
blockdiag {
|
||
update1 [label="Master\nUpdate 1"];
|
||
update2 [label="Master\nUpdate 2"];
|
||
updaten [label="Master\nUpdate N"];
|
||
sync [label="Synchronize\nBackup"];
|
||
update1 -> update2 ;
|
||
update2 -> updaten [label=".."];
|
||
updaten -> sync;
|
||
}
|
||
|
||
First commit all changes to the master, then update the backup while knowing the master is still properly configured.
|
||
|
||
.. Note::
|
||
|
||
In case of an emergency, you should still be able to switch to the backup node when changes cause issues, since
|
||
the backup machine is left in a known good state during the whole process.
|
||
|
||
|
||
-----------------------------
|
||
Automatic replication
|
||
-----------------------------
|
||
|
||
Although we advise to make sure to keep the backup machine intact during maintenance, some people prefer to keep
|
||
the backup in sync on periodic intervals. For this reason we added a cron action which you can schedule yourself
|
||
in :menuselection:`System -> Settings -> Cron` on the primary node.
|
||
|
||
To use this feature, add a new cron job containing the :code:`HA update and reconfigure backup` command and a
|
||
proper schedule, once a day outside office hours is usually a safe option.
|
||
|
||
.. Note::
|
||
|
||
To prevent a non functional primary machine updating the active master, the :code:`HA update and reconfigure backup`
|
||
will only execute if all carp interfaces are in :code:`MASTER` mode.
|
||
|
||
|
||
-----------------------------
|
||
Settings
|
||
-----------------------------
|
||
|
||
............................
|
||
Automatic failover
|
||
............................
|
||
|
||
Although not really a setting on the high availability setup page, it's a crucial part of high available setups.
|
||
Using CARP type virtual addresses, the secondary firewall will take over without user intervention and minimal
|
||
interruption when the primary becomes unavailable.
|
||
|
||
Virtual IPs of the type CARP (:doc:`/manual/firewall_vip`) are required for this feature.
|
||
|
||
............................
|
||
Synchronized state tables
|
||
............................
|
||
|
||
The firewall’s state table is replicated to all failover configured firewalls.
|
||
This means the existing connections will be maintained in case of a failure,
|
||
which is important to prevent network disruptions.
|
||
|
||
............................
|
||
Disable preempt
|
||
............................
|
||
|
||
By default this option is deselected, which is the advised scenario for most common HA setups.
|
||
The preempt option make sure that multiple carp interfaces will act as a group (all :code:`backup` or :code:`master`)
|
||
at the same time, assuming no technical issues exist between both.
|
||
|
||
.................................
|
||
Configuration synchronization
|
||
.................................
|
||
|
||
OPNsense includes configuration synchronization capabilities. Configuration
|
||
changes made on the primary system are synchronized on demand to the secondary firewall.
|
||
|
||
|
||
............................
|
||
Configure HA CARP
|
||
............................
|
||
|
||
For detailed setup guide see: :doc:`/manual/how-tos/carp`
|
||
|
||
|
||
-----------------------------
|
||
Status
|
||
-----------------------------
|
||
|
||
The status page connects to the backup host configured earlier and show all services running on the backup server.
|
||
With this page you can update the backup machine and restart services if needed.
|
||
|
||
|
||
.. Tip::
|
||
|
||
.. raw:: html
|
||
|
||
Use the refresh <i class="fa fa-refresh fa-fw"></i> button to update the backup node and restart all services at once.
|