mirror of
https://github.com/opnsense/docs
synced 2024-10-30 21:20:20 +00:00
207 lines
6.4 KiB
ReStructuredText
207 lines
6.4 KiB
ReStructuredText
|
|
============================
|
|
Transparent Filtering Bridge
|
|
============================
|
|
|
|
-------
|
|
Warning
|
|
-------
|
|
The Transparent Filtering Bridge is not compatible with Traffic Shaping.
|
|
Do not enable the traffic shaper when using the filtering bridge.
|
|
|
|
--------
|
|
Abstract
|
|
--------
|
|
|
|
A transparent firewall can be used to filter traffic without creating
|
|
different subnets. This application is called filtering bridge as it
|
|
acts as a bridge connection two interfaces and applies filtering rules
|
|
on top of this.
|
|
|
|
For more information on Filtering Bridged on FreeBSD, see
|
|
`filtering-bridges <https://www.freebsd.org/doc/en/articles/filtering-bridges/article.html>`__
|
|
|
|
------------
|
|
Requirements
|
|
------------
|
|
|
|
- For this howto we need a basic installation of OPNsense with factory
|
|
defaults as a starting point.
|
|
- And an appliance with 2 physical interfaces.
|
|
|
|
--------------
|
|
Considerations
|
|
--------------
|
|
|
|
To create this howto version OPNsense 15.7.11 has been used. Some screenshots
|
|
maybe outdated, but setting should apply up to at least 17.1.6. If you use a
|
|
different version some options can be different.
|
|
|
|
.. Note::
|
|
|
|
The Menu System of the User Interface has been updated with sub items.
|
|
Where tabs are shown in screenshots, these are now likely visible as submenu.
|
|
|
|
------------------------------
|
|
Configuration in 10 easy steps
|
|
------------------------------
|
|
|
|
.. contents::
|
|
:local:
|
|
|
|
.. Warning::
|
|
|
|
During the configuration you will be asked to "Apply" your changes several times,
|
|
however this may affect the current connection. So **don't** apply anything until
|
|
completely finished! You need to Save your changes for each step.
|
|
|
|
|
|
1. Disable Outbound NAT rule generation
|
|
---------------------------------------
|
|
|
|
To disable outbound NAT, go to
|
|
:menuselection:`Firewall --> NAT --> Outbound` and select “Disable Outbound NAT rule generation”.
|
|
|
|
|Filtering Bridge Step 1.png|
|
|
|
|
2. Change system tuneables
|
|
--------------------------
|
|
|
|
Enable filtering bridge by changing **net.link.bridge.pfil\_bridge**
|
|
from default to 1 in :menuselection:`System --> Settings --> System Tuneables`.
|
|
|
|
|Filtering Bridge Step 2.png|
|
|
|
|
And disable filtering on member interfaces by changing
|
|
**net.link.bridge.pfil\_member** from default to 0 in
|
|
:menuselection:`System --> Settings --> System Tuneables`.
|
|
|
|
|Filtering Bridge Step2a.png|
|
|
|
|
3. Create the bridge
|
|
--------------------
|
|
|
|
Create a bridge of LAN and WAN, go to
|
|
:menuselection:`Interfaces --> Other Types --> Bridge`. Add Select LAN and WAN.
|
|
|
|
|Filtering Bridge Step 3a.png|
|
|
|
|
|Filtering Bridge Step 3b.png|
|
|
|
|
4. Assign a management IP/Interface
|
|
-----------------------------------
|
|
|
|
To be able to configure and manage the filtering bridge (OPNsense)
|
|
afterwards, we will need to assign a new interface to the bridge and
|
|
setup an IP address.
|
|
|
|
Go to :menuselection:`Interfaces --> Assign --> Available network port`, select
|
|
the bridge from the list and hit **+**.
|
|
|
|
|Filtering Bridge Step 4.png|
|
|
|
|
Now Add an IP address to the interface that you would like to use to
|
|
manage the bridge. Go to :menuselection:`Interfaces --> [OPT1]`, enable the interface
|
|
and fill-in the ip/netmask.
|
|
|
|
5. Disable Block private networks & bogon
|
|
-----------------------------------------
|
|
|
|
For the WAN interface we nee to disable blocking of private networks & bogus IPs.
|
|
|
|
Go to :menuselection:`Interfaces --> [WAN]` and unselect **Block private networks**
|
|
and **Block bogon networks**.
|
|
|
|
|Filtering Bridge Step 5.png|
|
|
|
|
6. Disable the DHCP server on LAN
|
|
---------------------------------
|
|
|
|
To disable the DHCP server on LAN go to :menuselection:`Services --> DHCPv4 --> [LAN]` and
|
|
unselect enable.
|
|
|
|
|Filtering Bridge Step 6.png|
|
|
|
|
7. Add Allow rules
|
|
-------------------
|
|
After configuring the bridge the rules on member interfaces (WAN/LAN) will be
|
|
ignored. So you can skip this step.
|
|
|
|
Add the allow rules for all traffic on each of the three interfaces (WAN/LAN/OPT1).
|
|
|
|
This step is to ensure we have a full transparent bridge without any filtering
|
|
taking place. You can setup the correct rules when you have confirmed the bridge
|
|
to work properly.
|
|
|
|
Go to :menuselection:`Firewall --> Rules` and add a rule per interface to allow all traffic
|
|
of any type.
|
|
|
|
|Filtering Bridge Step 7.png|
|
|
|
|
8. Disable Default Anti Lockout Rule
|
|
------------------------------------
|
|
After configuring the bridge the rules on member interfaces (WAN/LAN) will be
|
|
ignored. So you can skip this step.
|
|
|
|
As we now have setup allow rules for each interface we can safely remove
|
|
the Anti Lockout rule on LAN
|
|
|
|
Go to :menuselection:`Firewall --> Settings --> Admin Access`: Anti-lockout and select
|
|
this option to disable
|
|
|
|
9. Set LAN and WAN interface type to 'none'
|
|
-------------------------------------------
|
|
|
|
Now remove the IP subnets in use for LAN and WAN by changing the
|
|
interface type to none. Go to :menuselection:`Interfaces --> [LAN]` and :menuselection:`Interfaces --> [WAN]`
|
|
to do so.
|
|
|
|
|Filtering Bridge Step 9.png|
|
|
|
|
10. Now apply the changes
|
|
-------------------------
|
|
|
|
If you followed each step, then you can now apply the changes. The
|
|
Firewall is now converted to a filtering bridge.
|
|
|
|
.. rubric:: Done.. ready to set your own filtering rules
|
|
:name: done..-ready-to-set-your-own-filtering-rules
|
|
|
|
Now you can create the correct firewall/filter rules and apply them. To
|
|
acces the firewall you need to use the IP adress you configured for the
|
|
OPT1 Interface.
|
|
|
|
.. WARNING::
|
|
|
|
Rules need to be configured on the bridge. Rules on member interfaces will
|
|
be ignored!
|
|
|
|
.. TIP::
|
|
|
|
Don't forget to make sure your PC/Laptop is configured with an IP adress that
|
|
falls within the IP range of the OPT1 subnet!
|
|
|
|
.. |Filtering Bridge Step 1.png| image:: images/Filtering_Bridge_Step_1.png
|
|
:width: 700px
|
|
.. |Filtering Bridge Step 2.png| image:: images/Filtering_Bridge_Step_2.png
|
|
:class: thumbimage
|
|
:width: 700px
|
|
.. |Filtering Bridge Step2a.png| image:: images/Filtering_Bridge_Step_2a.png
|
|
:class: thumbimage
|
|
:width: 700px
|
|
.. |Filtering Bridge Step 3a.png| image:: images/Filtering_Bridge_Step_3a.png
|
|
:width: 700px
|
|
.. |Filtering Bridge Step 3b.png| image:: images/Filtering_Bridge_Step_3b.png
|
|
:width: 700px
|
|
.. |Filtering Bridge Step 4.png| image:: images/Filtering_Bridge_Step_4.png
|
|
:width: 700px
|
|
.. |Filtering Bridge Step 5.png| image:: images/Filtering_Bridge_Step_5.png
|
|
:width: 700px
|
|
.. |Filtering Bridge Step 6.png| image:: images/Filtering_Bridge_Step_6.png
|
|
:width: 619px
|
|
.. |Filtering Bridge Step 7.png| image:: images/Filtering_Bridge_Step_7.png
|
|
:width: 700px
|
|
:height: 69px
|
|
.. |Filtering Bridge Step 9.png| image:: images/Filtering_Bridge_Step_9.png
|
|
:width: 700px
|