mirror of
https://github.com/opnsense/docs
synced 2024-11-15 06:12:58 +00:00
cb9853793e
"===" Will add a new menu in rst as you can see in this Overview: https://docs.opnsense.org/manual/howtos.html Overview and Interface Assignment belongs to ZeroTier ...
203 lines
8.4 KiB
ReStructuredText
203 lines
8.4 KiB
ReStructuredText
Zerotier Configuration
|
|
======================
|
|
|
|
.. Note::
|
|
It is strongly recommended that the reader familiarise themselves with the
|
|
`Zerotier Manual <https://www.zerotier.com/manual.shtml>`_, in order to further
|
|
understand the concepts behind this plugin.
|
|
|
|
Prerequisites
|
|
--------------
|
|
|
|
Firstly, it is important that you have signed up to Zerotier at the `Zerotier
|
|
Portal <https://my.zerotier.com>`_. Second, you will need to create at least
|
|
one network on the portal in order to obtain a Network Id that this plugin
|
|
uses to **join** this node to the created Zerotier network. This network will
|
|
become your private network that by default is visible only to your nodes - in
|
|
other words, other nodes that are on that network can talk to each other, but
|
|
nothing else can talk to them - they are completely transparent to the
|
|
internet in general. In effect you are layering a private network over the
|
|
public internet and all intra-node communication is encrypted and private
|
|
between them. This is further hinted at by the fact that the assigned IP
|
|
addresses are normally RFC1918 addresses, i.e., non-routable across the
|
|
internet.
|
|
|
|
Finally, in order to have a fully functioning private VPN between Zerotier
|
|
nodes, a combination of this plugin plus some configuration on the `portal
|
|
<https://my.zerotier.com>`_ **will** be required.
|
|
|
|
Installation
|
|
------------
|
|
|
|
From the Plugins view under ``System...Firmware``, install the os-zerotier
|
|
package. Once the new plugin has been installed, perform a page reload and a
|
|
new menu item should appear under VPN called Zerotier.
|
|
|
|
.. image:: images/zerotier-0.png
|
|
|
|
Clicking on the Zerotier menu item will reveal two further sub-menu items -
|
|
namely Settings and Overview. Clicking on "Settings" will present a new view
|
|
with two named tabs. The first tab is called Settings and the second tab is
|
|
called Networks. These are further described below.
|
|
|
|
.. image:: images/zerotier-1.png
|
|
|
|
Settings
|
|
--------
|
|
|
|
This tab controls the overall operation of Zerotier. Anything changed here is
|
|
applied globally to all defined networks and to the Zerotier service itself.
|
|
|
|
:Enabled:
|
|
Controls if the service should be running. If it is disabled, then access
|
|
to the Networks tab will be disabled. If it is enabled, access to the
|
|
Networks tab will be enabled and the service will also start at boot time.
|
|
|
|
:API Access Token (optional):
|
|
This optional entry is for future use and further development of the
|
|
Zerotier plugin. The API access token can be generated by logging into
|
|
your `portal <https://my.zerotier.com>`__ and creating a new API Access Token.
|
|
When the token has been generated, copy the value into this input box.
|
|
|
|
:local.conf settings (optional):
|
|
As described in the Zerotier Manual, a local.conf can be created to enable
|
|
or disable custom node-specific configuration overrides. Further details of
|
|
permitted options can be found on the `ZeroTier Manual
|
|
<https://www.zerotier.com/manual.shtml>`__. Please note that the local.conf
|
|
**must** be a valid JSON document otherwise the service will fail to start.
|
|
|
|
Networks
|
|
--------
|
|
|
|
This table allows for the creation, modification and deletion of Zerotier
|
|
networks. Adding a Network here will join your OPNsense installation to the
|
|
specified Zerotier network.
|
|
|
|
.. Note::
|
|
Remember, you **will** have to log into the Zerotier `portal
|
|
<https://my.zerotier.com>`__, select the network and authorise the node before
|
|
it can be assigned an IP address (or indeed, talk to other nodes on that
|
|
network).
|
|
|
|
.. image:: images/zerotier-2.png
|
|
|
|
|
|
Adding a network is quite straight-forward. Simply click on the + symbol key
|
|
in the following:
|
|
|
|
:Network Id:
|
|
This is the 64-bit (16 character hex) address that is generated on the
|
|
portal when creating a Zerotier network.
|
|
|
|
:Local Description (optional):
|
|
You may key in a description here that will help you remember what the
|
|
network is for. Please note that this field is **not** the same as the
|
|
name/description of the Zerotier network - it's simply an aide-mémoire to
|
|
help you remember what the network is for.
|
|
|
|
Adding a network does **not** automatically cause your OPNsense installation
|
|
to join that network. In order to join that network it **must** be ``Enabled``
|
|
first. Likewise, to remove your OPNsense node from the configured network
|
|
simply deselect ``Enabled``, thus disabling the network.
|
|
|
|
Once a network has been added and enabled the node **must** be authorised to
|
|
join the network on the portal. Simply enabling the network on your OPNsense
|
|
installation marks that node as a member of that network. It now has to
|
|
request permission to talk to the other nodes on that network. To achieve
|
|
this, you log into the portal, select the network, find the node address (this
|
|
can found on the OPNsense Zerotier Overview menu item, under the Information
|
|
tab) and authorise it by clicking on the "Auth?" check box beside the node. It
|
|
should go from "red" to "green" to indicate that it has been authorised.
|
|
|
|
Some final "Network" operations:
|
|
|
|
If you wish to completely remove the network, simply select the network and
|
|
click on the ``Bin`` icon.
|
|
|
|
If you wish to edit the network, click on the ``Pencil`` icon.
|
|
|
|
To "clone" the network entry, click on the ``Copy`` icon. Please ensure you
|
|
change the Network Id, as having two networks with the same id is an invalid
|
|
configuration.
|
|
|
|
For a very quick overview of the Zerotier network information, click on the
|
|
``Information`` icon. A more detailed view of the network can be found under
|
|
the ``Overview...Networks`` menu item.
|
|
|
|
ZeroTier Overview
|
|
-----------------
|
|
|
|
The following 3 tabs reveal Global, Network and Peer information. They can
|
|
only be viewed if the Zerotier plugin is enabled, so please ensure that the
|
|
service is enabled first. For information on the terminology used, please
|
|
refer to the `Zerotier Manual <https://www.zerotier.com/manual.shtml>`__.
|
|
|
|
.. image:: images/zerotier-3.png
|
|
|
|
Information Overview
|
|
--------------------
|
|
|
|
This tab shows "Global" information concerning the overall health of the
|
|
Zerotier service.
|
|
|
|
Networks Overview
|
|
------------------
|
|
|
|
This tab shows each configured **and** enabled network that this OPNsense
|
|
installation has joined. If no networks are enabled, no information is shown.
|
|
|
|
Peers Overview
|
|
--------------
|
|
|
|
This tab shows the peers (leaf, planets and moons - Zerotier terminology) known
|
|
by this node.
|
|
|
|
Interface Assignment
|
|
--------------------
|
|
|
|
.. WARNING::
|
|
It is **highly** recommended that the interface have auto-assignment of IP
|
|
addresses turned off **for this particular node only**. You want to give
|
|
the interface a statically assigned, stable IP address (from the Zerotier
|
|
network IP range) and not have the Zerotier service auto-assign an IP
|
|
address. Auto-assignment of IP addresses for nodes is controlled on the
|
|
`Zerotier Portal <https://my.zerotier.com>`_
|
|
|
|
After joining a Zerotier network (and authorising it on the portal) you may
|
|
now wish to assign the Zerotier virtual interface on OPNsense in order to
|
|
avail of OPNsense functionality such as firewalling and routing (using OSPF
|
|
for example).
|
|
|
|
.. image:: images/zerotier-4.png
|
|
|
|
To achieve this:
|
|
|
|
Click on the ``Interfaces`` menu item, then click on ``Assignments``. There
|
|
you should discover a new interface currently unassigned that begins with the
|
|
letters ``zt``. Next, click on the ``+`` symbol to assign it. In this example
|
|
it creates a new interface called ``OPT1``. Clicking on ``OPT1`` shows the
|
|
``Enable`` and ``Lock`` options. Check both options.
|
|
|
|
.. WARNING::
|
|
It is **very** important that ``Lock`` (i.e., Prevent interface removal)
|
|
is enabled. This is because Zerotier is a software interface and not
|
|
guaranteed to be brought "up" whilst the system is booting. It could
|
|
happen shortly afterwards, hence locking the interface tells OPNsense not
|
|
to remove it, thinking it's gone bad.
|
|
|
|
Once the new interface has been enabled, it is recommended to change the
|
|
Description away from ``OPT1`` to something more descriptive for your needs.
|
|
|
|
For ``IPv4 Configuration Type``, choose ``Static IPv4`` then in the
|
|
appropriate input boxes, key in the IPv4 address that you have assigned to
|
|
this node via the ``Zerotier`` portal. Keep the ``IPv4 Upstream Gateway`` set
|
|
to ``None.``
|
|
|
|
.. image:: images/zerotier-5.png
|
|
|
|
You may choose to do the same for ``IPv6 Configuration Type``.
|
|
|
|
Once the interface has been assigned with an IP, it show now also show up on
|
|
``Firewall`` Rules etc...plus any other operations that be done on a
|
|
interfaces can also be applied to your assigned interface.
|