mirror of
https://github.com/opnsense/docs
synced 2024-11-15 06:12:58 +00:00
324 lines
9.9 KiB
ReStructuredText
324 lines
9.9 KiB
ReStructuredText
=================================
|
|
Setup SSL VPN site to site tunnel
|
|
=================================
|
|
|
|
Site to site VPNs connect two locations with static public IP addresses and allow
|
|
traffic to be routed between the two networks. This is most commonly used to
|
|
connect an organization's branch offices back to its main office, so branch users
|
|
can access network resources in the main office.
|
|
|
|
.. Note::
|
|
|
|
When using the site to site example with :code:`SSL/TLS` instead of a shared key, make sure to configure "client specific overrides"
|
|
as well to correctly bind the remote networks to the correct client.
|
|
|
|
----------------
|
|
Before you start
|
|
----------------
|
|
Before starting with the configuration of an OpenVPN SSL tunnel you need to have a
|
|
working OPNsense installation with a unique LAN IP subnet for each side of your
|
|
connection (your local network needs to be different than that of the remote
|
|
network).
|
|
|
|
.. Note::
|
|
|
|
For the sample we will use a private IP for our WAN connection.
|
|
This requires us to disable the default block rule on WAN to allow private traffic.
|
|
To do so, go to :menuselection:`Interfaces --> [WAN]` and uncheck "Block private networks".
|
|
*(Don't forget to save and apply)*
|
|
|
|
.. image:: images/block_private_networks.png
|
|
|
|
-----------------------------
|
|
|
|
------------
|
|
Sample Setup
|
|
------------
|
|
For the sample configuration we use two OPNsense boxes to simulate a site to site
|
|
tunnel, with the following configuration:
|
|
|
|
.. sidebar:: Network Site A
|
|
|
|
.. nwdiag::
|
|
:scale: 100%
|
|
|
|
nwdiag {
|
|
|
|
span_width = 90;
|
|
node_width = 210;
|
|
Internet [shape = "cisco.cloud"];
|
|
pclana [label="PC Site A",shape="cisco.pc"];
|
|
pclana -- switchlana;
|
|
|
|
network LANA {
|
|
switchlana [label="",shape = "cisco.workgroup_switch"];
|
|
label = " LAN Site A";
|
|
address ="192.168.1.1.x/24";
|
|
fw1 [address="192.168.1.1/24"];
|
|
tunnel [label=" SSLVPN Tunnel",shape = cisco.cloud];
|
|
}
|
|
|
|
network WANA {
|
|
label = " WAN Site A";
|
|
fw1 [shape = "cisco.firewall", address="172.10.1.1/16"];
|
|
Internet;
|
|
}
|
|
|
|
}
|
|
|
|
Site A - Server
|
|
---------------
|
|
==================== =============================
|
|
**Hostname** fw1
|
|
**WAN IP** 172.10.1.1/16
|
|
**LAN IP** 192.168.1.1/24
|
|
**LAN DHCP Range** 192.168.1.100-192.168.1.200
|
|
**Tunnel Network** 10.10.0.0/24
|
|
==================== =============================
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-----------------------------
|
|
|
|
.. sidebar:: Network Site B
|
|
|
|
.. nwdiag::
|
|
:scale: 100%
|
|
|
|
nwdiag {
|
|
|
|
span_width = 90;
|
|
node_width = 210;
|
|
Internet [shape = "cisco.cloud"];
|
|
pclanb [label="PC Site B",shape="cisco.pc"];
|
|
pclanb -- switchlanb;
|
|
|
|
network LANB {
|
|
label = " LAN Site B";
|
|
address ="192.168.2.1.x/24";
|
|
fw2 [address="192.168.2.1/24"];
|
|
tunnel [label=" SSLVPN Tunnel",shape = cisco.cloud];
|
|
switchlanb [label="",shape = "cisco.workgroup_switch"];
|
|
}
|
|
|
|
network WANB {
|
|
label = " WAN Site B";
|
|
fw2 [shape = "cisco.firewall", address="172.10.2.1/16"];
|
|
Internet;
|
|
}
|
|
|
|
}
|
|
|
|
Site B - Client
|
|
---------------
|
|
|
|
==================== =============================
|
|
**Hostname** fw2
|
|
**WAN IP** 172.10.2.1/16
|
|
**LAN Net** 192.168.2.0/24
|
|
**LAN DHCP Range** 192.168.2.100-192.168.2.200
|
|
**Tunnel Network** 10.10.0.0/24
|
|
==================== =============================
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-----------------------------
|
|
|
|
|
|
Full Network Diagram Including SSL VPN Tunnel
|
|
---------------------------------------------
|
|
|
|
.. nwdiag::
|
|
:scale: 100%
|
|
:caption: SSL VPN Site-to-Site tunnel network
|
|
|
|
nwdiag {
|
|
|
|
span_width = 90;
|
|
node_width = 210;
|
|
Internet [shape = "cisco.cloud"];
|
|
pclana [label="PC Site A",shape="cisco.pc"];
|
|
pclana -- switchlana;
|
|
|
|
network LANA {
|
|
switchlana [label="",shape = "cisco.workgroup_switch"];
|
|
label = " LAN Site A";
|
|
address ="192.168.1.1.x/24";
|
|
fw1 [address="192.168.1.1/24"];
|
|
tunnel [label=" SSLVPN Tunnel",shape = cisco.cloud];
|
|
}
|
|
|
|
network WANA {
|
|
label = " WAN Site A";
|
|
fw1 [shape = "cisco.firewall", address="172.10.1.1/16"];
|
|
Internet;
|
|
}
|
|
|
|
network WANB {
|
|
label = " WAN Site B";
|
|
fw2 [shape = "cisco.firewall", address="172.10.2.1/16"];
|
|
Internet;
|
|
}
|
|
|
|
network LANB {
|
|
label = " LAN Site B";
|
|
address ="192.168.2.1.x/24";
|
|
fw2 [address="192.168.2.1/24"];
|
|
tunnel;
|
|
switchlanb [label="",shape = "cisco.workgroup_switch"];
|
|
}
|
|
pclanb [label="PC Site B",shape="cisco.pc"];
|
|
pclanb -- switchlanb;
|
|
|
|
}
|
|
|
|
|
|
------------------------
|
|
Step 1 - Add SSL Server
|
|
------------------------
|
|
Adding a new SSL VPN server is relatively simple. We'll start by adding a server
|
|
that uses a shared key. This setup offers a good protection and it is
|
|
easy to setup.
|
|
|
|
Go to :menuselection:`VPN --> OpenVPN --> Servers` and click on click **Add** in the top right corner
|
|
of the form.
|
|
|
|
For our example will use the following settings (leave everything else on its default):
|
|
|
|
|
|
===================================== ===============================================
|
|
**Server Mode** *Peer to Peer (Shared Key)*
|
|
**Protocol** *UDP*
|
|
**Device Mode** *tun*
|
|
**Interface** *WAN*
|
|
**Local port** *1194*
|
|
**Description** *SSL VPN Server*
|
|
**Shared Key** *Leave on enabled (checked) to create a new key*
|
|
**DH Parameters Length** *4096*
|
|
**Encryption algorithm** *AES-256-CBC (256-bit)*
|
|
**Auth Digest Algorithm** *SHA512 (512-bit)*
|
|
**IPv4 Tunnel Network** *10.10.0.0/24*
|
|
**IPv4 Local Network/s** *192.168.1.0/24*
|
|
**IPv4 Remote Network/s** *192.168.2.0/24*
|
|
**Compression** *Enabled with Adaptive Compression*
|
|
===================================== ===============================================
|
|
|
|
Click **Save** to add the new server.
|
|
|
|
.. image:: images/sslvpn_server.png
|
|
:width: 100%
|
|
|
|
----------------------
|
|
|
|
------------------------
|
|
Step 2 - Copy Shared Key
|
|
------------------------
|
|
To copy the newly created shared key, click on the pencil icon next to the
|
|
newly created SSL VPN server.
|
|
|
|
You will see the shared key, copy this and keep it safe!
|
|
|
|
Sample key:
|
|
|
|
.. code-block::
|
|
|
|
#
|
|
# 2048 bit OpenVPN static key
|
|
#
|
|
-----BEGIN OpenVPN Static key V1-----
|
|
0960c87c3aafa8f306fe270c1564380b
|
|
7922543563a17b5d2636b4ef9412dd09
|
|
9ad44974ca1b293963e0f8ac9cbdd97c
|
|
2c31bf35f0df45c9e928ccb033e6d51d
|
|
2caaec02d649ad081c68d7bc7d28030e
|
|
9182c9597a83024097bea860e52d9c66
|
|
1b9e0048fbf951ce8659bc56edb7f9a1
|
|
14f7740fc9231a3750557e02eb112712
|
|
ac4b9980d4c740ec96a4357f3940ed90
|
|
d1bbf8eed3de135c886fe2eff8e8b943
|
|
ab1f52b59def4c9ebeacc5eb48425189
|
|
c43887a6237c29e0724f5f45a0f70635
|
|
10680bec8bfb67c21bf2b4866268594c
|
|
9ba093668064f9a898e6a6ad103b401d
|
|
b2047132f0dc8db2230db38444d689fa
|
|
ddba46bf6f892ae90c59415f94b82750
|
|
-----END OpenVPN Static key V1-----
|
|
|
|
|
|
|
|
------------------------------
|
|
Step 3 - Server Firewall Rules
|
|
------------------------------
|
|
To allow SSL VPN client connections, we should allow access to the OpenVPN server
|
|
port on the WAN interface. When using multiple servers we need to open up each port.
|
|
|
|
For our configuration we only use one server accessible on UDP port 1194.
|
|
|
|
.. image:: images/sslvpn_wan_rule.png
|
|
:width: 100%
|
|
|
|
Next we also need to allow traffic from the VPN client network (192.168.2.0/24).
|
|
For our example we will allow client to access anything on our local network(s),
|
|
however you may decide just to allow traffic to one or more IPs.
|
|
|
|
.. image:: images/sslvpn_openvpn_rule.png
|
|
:width: 100%
|
|
|
|
**You are done configuring Site A.**
|
|
|
|
-----------------------------
|
|
|
|
----------------------
|
|
Step 4 - Site B Client
|
|
----------------------
|
|
Now we will have to setup the client.
|
|
Login to the second firewall, go to :menuselection:`VPN --> OpenVPN --> Clients` and click on
|
|
**add client** in the upper right corner of the form.
|
|
|
|
Now enter the following into the form (and leave everything else default):
|
|
|
|
===================================== ===============================================
|
|
**Server Mode** *Peer to Peer (Shared Key)*
|
|
**Protocol** *UDP*
|
|
**Device Mode** *tun*
|
|
**Interface** *WAN*
|
|
**Server host or address** *172.10.1.1*
|
|
**Server port** *1194*
|
|
**Description** *SSL VPN Client*
|
|
**Shared Key** *Uncheck to paste the shared key*
|
|
... *Paste your shared key*
|
|
**Server Certificate** *SSLVPN Server Certificate (CA: SSL VPN CA)*
|
|
**DH Parameters Length** *4096*
|
|
**Encryption algorithm** *AES-256-CBC (256-bit)*
|
|
**Auth Digest Algorithm** *SHA512 (512-bit)*
|
|
**Hardware Crypto** *No Hardware Crypto Acceleration*
|
|
**IPv4 Tunnel Network** *10.10.0.0/24*
|
|
**IPv4 Remote Network/s** *192.168.1.0/24*
|
|
**Compression** *Enabled with Adaptive Compression*
|
|
===================================== ===============================================
|
|
|
|
Now click on **Save** to apply your settings.
|
|
|
|
The Connection Status can be viewed under :menuselection:`VPN --> OpenVPN --> Connection Status`
|
|
|
|
.. image:: images/sslvpn_connection_status.png
|
|
:width: 100%
|
|
|
|
------------------------------
|
|
Step 5 - Client Firewall Rules
|
|
------------------------------
|
|
To allow traffic from the remote network just add a rule under :menuselection:`Firewall --> Rules`
|
|
OpenVPN tab.
|
|
|
|
.. image:: images/sslvpn_firewall_rule_client.png
|
|
:width: 100%
|
|
|
|
|
|
**Done**
|