mirror of
https://github.com/opnsense/docs
synced 2024-10-30 21:20:20 +00:00
86 lines
3.8 KiB
ReStructuredText
86 lines
3.8 KiB
ReStructuredText
=========================
|
|
Settings
|
|
=========================
|
|
|
|
There are some advanced settings, which you can alter in :menuselection:`Interfaces --> Settings`, most of the time
|
|
you should leave these settings default, but advanced scenarios may require specific settings.
|
|
|
|
The settings on this page will be applied after reboot or a reconfiguration of each interface.
|
|
|
|
|
|
.. Note::
|
|
|
|
When using VLAN's make sure to assign the parent interface as well as hardware settings are configured on the
|
|
device itself.
|
|
|
|
--------------------
|
|
Hardware CRC
|
|
--------------------
|
|
Disable hardware checksum offloading, which is checked by default, controls if user-configurable checksum offloading might be handled by the network card.
|
|
Not all technologies support this (IPS for example) and some drivers have issues when enabled. We generally advise to keep this disabled, the
|
|
performance gain is debatable as well.
|
|
|
|
(the :code:`ifconfig` settings in the OS related to this setting are :code:`txcsum` , :code:`rxcsum` , :code:`txcsum6` , :code:`rxcsum6`)
|
|
|
|
|
|
--------------------
|
|
Hardware TSO
|
|
--------------------
|
|
Disable hardware TCP segmentation offload, also checked by default, prevents the system to offload packet segmentation to the network card.
|
|
This option is incompatible with IPS in OPNsense and is broken in some network cards.
|
|
|
|
(the :code:`ifconfig` settings in the OS related to this setting are :code:`tso` , :code:`tso4` , :code:`tso6`)
|
|
|
|
--------------------
|
|
Hardware LRO
|
|
--------------------
|
|
Disable hardware large receive offload, which is checked by default, prevents the network card from aggregating incoming packets
|
|
into a larger buffer before passing it further on the network stack (in order to decrease the number of packets to process).
|
|
|
|
For routing traffic its usually advisable to disable options which queue traffic in the network card to prevent additional latency.
|
|
|
|
Enabling LRO might degrade routing performance or for some drivers is incompatible with packet-forwarding at all.
|
|
|
|
(the :code:`ifconfig` setting in the OS related to this setting is :code:`lro`)
|
|
|
|
|
|
-------------------------
|
|
VLAN Hardware Filtering
|
|
-------------------------
|
|
|
|
Set usage of VLAN hardware filtering.
|
|
This hardware acceleration may be broken in some device drivers, our advice is to keep this setting on "Disable VLAN Hardware
|
|
Filtering", which is the default as of 20.7.
|
|
In some cases (pre 20.7) we have seen random disconnects when the driver is forced into a mode it was not set at by default.
|
|
|
|
|
|
(the :code:`ifconfig` settings in the OS related to this setting are :code:`vlanhwtag`, :code:`vlanhwcsum` , :code:`vlanhwfilter` , :code:`vlanhwtso`)
|
|
|
|
--------------------------
|
|
ARP Handling
|
|
--------------------------
|
|
By default the kernel logs movement of ip addresses from one hardware address to another and when an arp request is received on the
|
|
wrong interface. When checking this option, it will stop doing so, which is practical if multiple interfaces reside on the same broadcast domain.
|
|
|
|
(for a more detailed description, see :code:`man arp` and search :code:`log_arp_wrong_iface` and :code:`log_arp_movements`)
|
|
|
|
--------------------------
|
|
Prevent release
|
|
--------------------------
|
|
|
|
Do not send a release message on client exit to prevent the release of an allocated address or prefix on the server.
|
|
|
|
--------------------------
|
|
Log level
|
|
--------------------------
|
|
|
|
Modify log level for IPv6 clients. Info will give status, interface leases and addresses. Debug will give full diagnostics.
|
|
|
|
--------------------------
|
|
DHCP Unique Identifier
|
|
--------------------------
|
|
This option can be used to enter an explicit DUID for use by IPv6 DHCP clients, the different types are detailed in
|
|
`section 11 of rfc8415 <https://tools.ietf.org/html/rfc8415#section-11>`__
|
|
|
|
When not set, the dhcp v6 client (:code:`dhcp6c`) will assign one automatically.
|