Archives/opensense-docs
2
0
Fork 0
mirror of https://github.com/opnsense/docs synced 2024-11-01 15:40:23 +00:00
Code Issues Projects Releases Wiki Activity
477dd74de9
opensense-docs/source/manual/install.rst
Franco Fichtner 9d86c3ce53 more tweaks like previous
2018-02-04 13:11:03 +01:00

404 lines
14 KiB
ReStructuredText
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

=====================================
Initial Installation & Configuration
=====================================
.. rubric:: Software setup
:name: firstHeading
:class: firstHeading page-header
.. Note::
Just looking on how to invoke the installer? When the live environment has been
started just login with user **installer** and password **opnsense**.
------------
Architecture
------------
The **software setup** and installation of OPNsense® is available for
`x86-32 <https://en.wikipedia.org/wiki/X86-32>`__ and
`x86-64 <https://en.wikipedia.org/wiki/X86-64>`__ bit microprocessor
architectures.
----------------
Embedded vs Full
----------------
Full installs can run on `SD memory
cards <https://en.wikipedia.org/wiki/Secure_Digital>`__, `solid-state
disks (SSD) <https://en.wikipedia.org/wiki/Solid-state_drive>`__ or
`hard disk drives
(HDD) <https://en.wikipedia.org/wiki/Hard_disk_drive>`__.
Since version 15.1.10 (04 May 2015) the option to install an
`embedded <https://en.wikipedia.org/wiki/Embedded_operating_system>`__
OPNsense image is also supported.
The main differences between an embedded image and a full image are:
+-----------------------+-----------------------+
| Embedded | Full |
+=======================+=======================+
| Uses NanoBSD | Uses FreeBSD |
+-----------------------+-----------------------+
| Writes to RAM disk | Writes to local disk |
+-----------------------+-----------------------+
| No log data retention | Log data retention |
| after reboot | after reboot |
+-----------------------+-----------------------+
| Not intended for | Suitable for disk |
| local disk writes | writes. |
+-----------------------+-----------------------+
| Embedded only use | Can enable RAM disk |
| | for embedded mode. |
+-----------------------+-----------------------+
Embedded images (nanobsd) store logging and cache data in memory only, while full versions
will keep the data stored on the local drive. A full version can mimic the
behavior of an embedded version by enabling RAM disks, this is especially
useful for SD memory card installations.
.. Warning::
See the chapter :doc:`Hardware Setup <hardware>` for
further information on hardware requirements prior to an install.
--------
Download
--------
The OPNsense distribution can be `downloaded <https://opnsense.org/download>`__
from one of our `mirrors <https://opnsense.org/download>`__.
------------------
Installation Media
------------------
Depending on you hardware and use case different installation media are provided:
+--------+-----------------------------------------------------+
|Type | | Description |
+========+=====================================================+
| cdrom | | ISO installer image with live system capabilities |
| | | running in VGA-only mode |
+--------+-----------------------------------------------------+
| vga | | USB installer image with live system capabilities |
| | | running in VGA-only mode |
+--------+-----------------------------------------------------+
| serial | | USB installer image with live system capabilities |
| | | running in serial console (115200) mode with |
| | | secondary VGA support (no kernel messages though) |
+--------+-----------------------------------------------------+
| nano | | a preinstalled serial image for 4GB USB sticks, |
| | | SD or CF cards for use with embedded devices |
+--------+-----------------------------------------------------+
.. Warning::
Flash memory cards will only tolerate a limited number of writes
and re-writes. For embedded (nano) versions memory disks for /var and /tmp are
applied by default to prolong CF (flash) card lifetimes.
To enable for non embedded versions: Enable **System⇒Settings⇒Miscellaneous⇒RAM** Disk
Settings; afterwards reboot. Consider to enable an external syslog server as well.
------------------------------
Media Filename Composition
------------------------------
.. blockdiag::
:scale: 100%
diagram {
default_shape = roundedbox;
default_node_color = white;
default_linecolor = darkblue;
default_textcolor = black;
default_group_color = lightgray;
OS [label="OPNsense-##.#.##-OpenSSL-", width=200];
platform_1 [label = "i386-" ];
platform_2 [label = "amd64-" ];
OS -> cdrom-;
group {
orientation = portrait
label = "Type";
fontsize = 20;
cdrom- -> nano- -> serial- -> vga-;
}
group {
orientation = portrait
label = "Architecture";
fontsize = 20;
platform_1 -> platform_2;
}
group {
orientation = portrait
label = "Image Format";
fontsize = 20;
"iso.bz2" -> "img.bz2";
}
cdrom- -> platform_1 -> "iso.bz2";
}
.. Note::
**Please** be ware that the latest installation media does not always
correspond with the latest released version. OPNsense installation images are
provided on a regular bases together with mayor versions in January and July.
More information on our release schedule is available from our package
repository see `README <https://pkg.opnsense.org/releases/16.1/README>`__
------------------
OpenSSL & LibreSSL
------------------
OPNsense images are provided based upon `OpenSSL <https://www.openssl.org>`__.
The `LibreSSL <http://www.libressl.org>`__ flavor can be selected from within
the GUI ( System⇒Firmware⇒Settings ). In order to apply your choice an update
must be performed after save, which can include a reboot of the system.
.. image:: ./images/firmware_flavour.png
-------------------
Installation Method
-------------------
Download the installation image from one of the mirrors listed on the `OPNsense
<https://opnsense.org/download/>`__ website.
The easiest method of installation is the USB-memstick installer. If
your target platform has a serial interface choose the "serial image.
64-bit and 32-bit install images are provided. The following examples
apply to both.
Write the image to a USB flash drive (>= 1GB) or an IDE hard disk,
either with dd under FreeBSD or under Windows with physdiskwrite
Before writing an (iso) image you need to unpack it first (use bunzip2).
**FreeBSD**
::
dd if=OPNsense-##.#.##-[Type]-[Architecture].img of=/dev/daX bs=16k
Where X = the device number of your USB flash drive (check ``dmesg``)
**Linux**
::
dd if=OPNsense-##.#.##-[Type]-[Architecture].img of=/dev/sdX bs=16k
where X = the IDE device name of your USB flash drive (check with hdparm -i /dev/sdX)
(ignore the warning about trailing garbage - it's because of the digital signature)
**OpenBSD**
::
dd if=OPNsense-##.#.##-[Type]-[Architecture].img of=/dev/rsd6c bs=16k
The device must be the ENTIRE device (in Windows/DOS language: the 'C'
partition), and a raw I/O device (the 'r' in front of the device "sd6"),
not a block mode device.
**Mac OS X**
::
sudo dd if=OPNsense-##.#.##-[Type]-[Architecture].img of=/dev/rdiskX bs=64k
where r = raw device, and where X = the disk device number of your CF
card (check Disk Utility) (ignore the warning about trailing garbage -
it's because of the digital signature)
**Windows**
::
physdiskwrite -u OPNsense-##.#.##-[Type]-[Architecture].img
(use v0.3 or later!)
.. rubric:: Install Instructions
:name: install-to-system
The boot process gives you the opportunity to run several optional configuration
steps. It has been designed to always boot into a live environment in order to
be able to access the GUI or even SSH directly. If a timeout was missed simply
restart the boot procedure.
OPNsense Importer
-----------------
All images feature the new "opnsense-importer" utility, which is now invoked
instead of the early installer. You can stop the automatic timeout by pressing
any key. Afterwards you will have the opportunity to select a disk to import
from. If the option times out or the importer is exited without a disk selection,
the factory defaults will be used for the boot.
The next prompt will be for manual interface selection.
This step is well-established since OPNsense 15.7 .
Live environment
----------------
The system will then continue into a live environment. If the config importer
was used previously on an existing installation, the system will boot up with a
fully functional setup, but will not overwrite the previous installation. Use
this feature for safely previewing upgrades.
If you have used a CD-ROM, VGA, Serial image without a config import you are by
default able to (a) log into the root shell using the user "root" with password
"opnsense", or (b) log into the installer using the user "installer" with
password "opnsense". The GUI will listen on https://192.168.1.1/ for user "root"
with password "opnsense". Using SSH, the "root" and "installer" users are
available as well on IP 192.168.1.1. Note that these install medias are
read-only, which means your current live configuration will be lost after reboot.
Nano Image
----------
If you have used a Nano image, your system is already up and running as it is
designed as such. It is set to read-write attempting to minimise write cycles by
mounting relevant partitions as memory file systems. If you should require an
installer anyway, log in as user "root", select option 8 from the menu and type
"opnsense-installer". The "opnsense-importer" can be run this way as well should
you require to run the import again.
Create a bootable USB flash drive with the downloaded and unpacked img
file. Configure your system to boot from USB.
Installation Steps
------------------
The installation process involves a few simple steps.
.. Note::
To invoke the installer login with user **installer** and password
**opnsense**
.. Tip::
The installer can also be started from the network using ssh, default ip
address is 192.168.1.1
#. Configure console - The default configuration should be fine for most
occasions.
#. Select task - The **Quick/Easy Install** option should be fine for most
occasions. For installations on embedded systems or systems with minimal
diskspace choose **Custom Installation** and do not create a swap slice.
Continue with default settings.
#. **Are you SURE?** - When proceeding OPNsense will be installed on the
**first hard disk** in the system.
#. Reboot - The system is now installed and needs to be rebooted to
continue with configuration.
.. Warning::
You will lose all files on the installation disk. If another disk is to be
used then choose a Custom installation instead of the Quick/Easy Install.
---------------------
Initial configuration
---------------------
After installation the system will prompt you for the interface
assignment, if you ignore this then default settings are applied.
Installation ends with the login prompt.
By default you have to log in to enter the console.
**Welcome message**
::
* * * Welcome to OPNsense [OPNsense 15.7.25 (amd64/OpenSSL) on OPNsense * * *
 
WAN (em1) -> v4/DHCP4: 192.168.2.100/24
LAN (em0) -> v4: 192.168.1.1/24
 
FreeBSD/10.1 (OPNsense.localdomain) (ttyv0)
 
login:   
.. TIP::
A user can login to the console menu with his
credentials. The default credentials after a fresh install are username "root"
and password "opnsense".
VLANs and assigning interfaces
If choose to do manual interface assignment or when no config file can be
found then you are asked to assign Interfaces and VLANs. VLANs are optional.
If you do not need VLAN's then choose **no**. You can always configure
VLAN's at a later time.
LAN, WAN and optional interfaces
The first interface is the LAN interface. Type the appropriate
interface name, for example "em0". The second interface is the WAN
interface. Type the appropriate interface name, eg. "em1" . Possible
additional interfaces can be assigned as OPT interfaces. If you
assigned all your interfaces you can press [ENTER] and confirm the
settings. OPNsense will configure your system and present the login
prompt when finished.
Minimum installation actions
In case of a minimum install setup (i.e. on CF cards), OPNsense can
be run with all standard features, expect for the ones that require
disk writes, e.g. a caching proxy like Squid. Do not create a swap
slice, but a RAM Disk instead. In the GUI enable **System⇒Settings⇒Miscellaneous⇒RAM Disk Settings**
and set the size to 100-128 MB or more, depending on your available RAM.
Afterwards reboot.
**Enable RAM disk manually**
.. image:: ./images/Screenshot_Use_RAMdisks.png
:scale: 100%
Then via console, check your /etc/fstab and make sure your primary
partition has **rw,noatime** instead of just **rw**.
.. rubric:: Console
:name: console
The console menu shows 13 options.
::
0)  Logout   7)  Ping host
1)  Assign interfaces   8)  Shell
2)  Set interface(s) IP address   9)  pfTop
3)  Reset the root password   10)  Filter logs
4)  Reset to factory defaults   11)  Restart web interface
5)  Reboot system   12)  Upgrade from console
6)  Halt system   13)  Restore a configuration
Table: *The console menu*
.. rubric:: opnsense-update
:name: opnsense-update
OPNsense features a command line
interface (CLI) tool "opnsense-update". Via menu option **8) Shell**, the user can
get to the shell and use opnsense-update.
For help type *opnsense-update -help* and [Enter]
.. rubric:: Upgrade from console
:name: upgrade-from-console
The other method to upgrade the system is via console option **12) Upgrade from console**
.. rubric:: GUI
:name: gui
An update can be done through the GUI via **System⇒Firmware⇒Updates**.
.. image:: ./images/firmware-update.png
:scale: 100%
Reference in New Issue View Git Blame Copy Permalink