mirror of
https://github.com/opnsense/docs
synced 2024-11-17 03:25:33 +00:00
49 lines
1.7 KiB
ReStructuredText
49 lines
1.7 KiB
ReStructuredText
==========================
|
|
NUT - Network UPS Tools
|
|
==========================
|
|
|
|
--------------------------
|
|
What is NUT
|
|
--------------------------
|
|
|
|
NUT is a tool that enables the use of a UPS device via either USB or Network communication.
|
|
|
|
--------------------------
|
|
Installation
|
|
--------------------------
|
|
NUT is available as a plugin in OPNSense via the plugin **os-nut**. You can install the plugin via **System > Firmware > Plugins > os-nut**.
|
|
|
|
--------------------------
|
|
How to Setup - Netclient
|
|
--------------------------
|
|
1. Navigate to the NUT services page and fill in the following values, then click apply:
|
|
|
|
==================== ============================================
|
|
Enable NUT Checked
|
|
Service Mode netclient
|
|
Name <choose a name>
|
|
Listen Address <interface ip on which the server lives>
|
|
==================== ============================================
|
|
|
|
2. Click on the arrow down next to **UPS Type** and choose **Netclient**.
|
|
|
|
.. image:: images/nut_netclient_dropdown.png
|
|
|
|
3. Fill in these values, then click apply:
|
|
|
|
==================== ============================================
|
|
Enable Checked
|
|
IP Address <ip of NUT Server>
|
|
Username <username, if applicable>
|
|
Password <password, if applicable>
|
|
==================== ============================================
|
|
|
|
4. Click on **Diagnostics** in the left menubar. If configured correctly this page will show, after waiting a few seconds, information about the UPS. Look for **device.mfr** and **device.model** to check if the correct UPS is detected.
|
|
|
|
.. image:: images/nut_diagnostics.png
|
|
|
|
--------------------------
|
|
References
|
|
--------------------------
|
|
- `Official website of NUT <https://networkupstools.org/>`__
|