mirror of
https://github.com/opnsense/docs
synced 2024-11-09 01:10:33 +00:00
76 lines
3.6 KiB
ReStructuredText
76 lines
3.6 KiB
ReStructuredText
=============
|
|
Serial Access
|
|
=============
|
|
|
|
.. image:: images/serial_bootloader.png
|
|
|
|
Besides the web frontend, SSH and a locally connected monitor (if your device supports it), OPNsense can also be
|
|
controlled via serial. Accessing OPNsense via serial is similar to accessing via SSH, but unlike SSH, the system can
|
|
be accessed at any time, even when OPNsense is not accessible over the network. This makes it especially useful for installing OPNsense,
|
|
for emergency troubleshooting when you accidentally cut off internet access as well as for major system upgrades.
|
|
|
|
------------
|
|
Requirements
|
|
------------
|
|
|
|
* OPNsense installation must provide a serial interface (virtual or hardware)
|
|
* Software which can be used to access the serial interface (screen, minicom, PuTTY etc.)
|
|
|
|
For a bare metal installation, you also need the following (unless provided though a management interface differently,
|
|
please refer your server manual):
|
|
|
|
* a null modem cable
|
|
* if you don't have an RS232 port on your computer, you need an USB to RS232 converter
|
|
|
|
--------------------------------
|
|
Connecting to the serial console
|
|
--------------------------------
|
|
|
|
If you already installed OPNsense via a non-serial installer, serial access needs to be turned on. To do this, open
|
|
the web interface, navigate to :menuselection:`System --> Settings --> Administration`, scroll down to 'Console' and set the primary or
|
|
secondary console to 'Serial console'. Note: this is **only** necessary if you already installed OPNsense, and did not
|
|
use the serial installer to do so. In all other cases (accessing BIOS, running the serial installer, connecting to an
|
|
installation that was done via serial), serial access is already available.
|
|
|
|
On Unix-like systems, you can connect to the serial console using the ``screen`` program, with a baud rate of 115200.
|
|
The device name can differ per system and per serial device. Examples of names are:
|
|
|
|
* /dev/ttyS0 (serial port, Linux)
|
|
* /dev/ttyUSB0 (usb-to-serial, Linux)
|
|
* /dev/cuau0 (serial port, FreeBSD)
|
|
* /dev/cuaU0 (usb-to-serial, FreeBSD)
|
|
* /dev/tty.usbmodem1112421 (usb-to-serial, macOS)
|
|
* COM1, COM2, ... (Windows)
|
|
|
|
.. Note::
|
|
If you have multiple devices of the same type like shown here:
|
|
|
|
:code:`# ls /dev/ttyUSB*`
|
|
|
|
:code:`/dev/ttyUSB0 /dev/ttyUSB1`
|
|
|
|
You can disconnect one of them to see which one is left or you can read the ``dmesg`` log to get the vendor information
|
|
for the device node.
|
|
You can search for a message containing "now attached to ttyUSB1" to find out which device it is. Afterwards you can
|
|
compare the previous output to the output of a tool like ``lsusb``.
|
|
|
|
For example, on the Deciso DEC630, accessed from macOS, the device is named ``/dev/tty.usbmodem1112421``. Entering
|
|
the serial console thus involves opening a terminal and executing the following instruction:
|
|
|
|
::
|
|
|
|
screen /dev/tty.usbmodem1112421 115200
|
|
# or
|
|
minicom -b 115200 -D /dev/tty.usbmodem1112421
|
|
|
|
.. Note::
|
|
Access to the device is likely to be access restricted. You should run the command as root because running it as
|
|
a user may lead to an access denied error on Linux / BSD.
|
|
|
|
If OPNsense is running, you will now be asked for your username and password if authentication is enabled. Otherwise
|
|
the menu is displayed (at least after pressing enter). The credentials are the same as those used for SSH.
|
|
|
|
A thing to note is that the screen won't always auto-update. If you connect and see no output, try pressing `Enter`
|
|
first before checking the other (more complex) possibilities. Another thing is that, when connecting via ``screen``,
|
|
you might not be able to scroll (but you can still pipe the output through a pager like ``more`` or ``less``).
|