mirror of https://github.com/opnsense/docs
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
124 lines
5.7 KiB
ReStructuredText
124 lines
5.7 KiB
ReStructuredText
=========================================
|
|
Multi Interface shaping for a GuestNet
|
|
=========================================
|
|
|
|
One of the options with OPNsense's traffic shaper is its ability to add shaping
|
|
rules based upon two interfaces. This option allows you to shape traffic
|
|
differently based on the direction the traffic is moving between interfaces.
|
|
|
|
For this example we will use this functionality to share a symmetric 10 Mbps internet
|
|
connection between a primary LAN network and a Guest Network.
|
|
|
|
The LAN network will not be limited, traffic from users on our Guest Network will
|
|
be limited to a total of 2 Mbps Download and 1 Mbps Upload.
|
|
|
|
.. nwdiag::
|
|
:scale: 100%
|
|
:caption: Simple network diagram
|
|
|
|
nwdiag {
|
|
|
|
span_width = 90;
|
|
node_width = 180;
|
|
Internet [shape = "cisco.cloud"];
|
|
Internet -- switchwan;
|
|
|
|
network WAN {
|
|
switchwan [label="",shape = "cisco.workgroup_switch"];
|
|
label = "WAN Interface em1";
|
|
fw1 [label="OPNsense", shape = "cisco.firewall", address="172.10.1.1/32"];
|
|
}
|
|
|
|
network LAN {
|
|
switchlan [label="",shape = "cisco.workgroup_switch"];
|
|
label = "LAN Interface em0";
|
|
address ="192.168.1.x/24";
|
|
fw1 [label="OPNsense",address="192.168.1.1/24"];
|
|
}
|
|
|
|
pc [label="LAN PC",shape="cisco.pc"];
|
|
pc -- switchlan;
|
|
|
|
network GuestNet {
|
|
switchguestnet [label="",shape = "cisco.workgroup_switch"];
|
|
label = "GuestNet Interface em2";
|
|
address ="192.168.2.x/24";
|
|
fw1 [label="OPNsense",address="192.168.2.1/24"];
|
|
}
|
|
|
|
laptop [label="Guest Laptop", shape="cisco.laptop"]
|
|
laptop -- switchguestnet;
|
|
|
|
}
|
|
|
|
Step 1 - Create Upload and Download Pipes
|
|
-----------------------------------------
|
|
|
|
On the **Pipes** tab click the **+** button in the lower right corner.
|
|
An empty **Edit Pipe** screen will popup.
|
|
|
|
Create Pipe For Upload (GuestNet - em2)
|
|
|
|
====================== ================ ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 1 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Mbit/s *Metric to use with the numeric value*
|
|
**mask** (Empty) *Leave empty*
|
|
**description** PipeUp-1Mbps *Free field, enter something descriptive*
|
|
====================== ================ ================================================
|
|
|
|
|
|
Create Pipe For Download (GuestNet - em2)
|
|
|
|
====================== ================== ================================================
|
|
**enabled** Checked *Check to enable the pipe*
|
|
**bandwidth** 2 *Numeric value of the desired bandwidth*
|
|
**bandwidth Metric** Mbit/s *Metric to use with the numeric value*
|
|
**mask** (Empty) *Leave empty*
|
|
**description** PipeDown-2Mbps *Free field, enter something descriptive*
|
|
====================== ================== ================================================
|
|
|
|
Step 2 - Create Rules
|
|
----------------------
|
|
|
|
On the **Rules** tab click the **+** button in the lower right corner.
|
|
An empty **Edit rule** screen will popup.
|
|
|
|
Important - Before you continue!
|
|
First change the mode to advanced, see the toggle in the left top corner of the
|
|
popup dialog. One click should shift it from red (disabled) to green (enabled).
|
|
|
|
Create a rule for the download traffic
|
|
|
|
====================== =================== =====================================================
|
|
**sequence** 11 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface connected to the internet*
|
|
**interface2** GuestNet *Select the interface that matches your GuestNet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** any *The source address, leave on any*
|
|
**src-port** any *The source port to shape, leave on any*
|
|
**destination** any *The destination IP to shape, leave on any*
|
|
**dst-port** any *The destination port to shape, leave on any*
|
|
**direction** in *Match incoming packages (download)*
|
|
**target** PipeDown-2Mbps *Select the Download pipe*
|
|
**description** GuestNetDownload *Enter a descriptive name*
|
|
====================== =================== =====================================================
|
|
|
|
Create a rule for the upload traffic
|
|
|
|
====================== =================== =====================================================
|
|
**sequence** 21 *Auto generated number, overwrite only when needed*
|
|
**interface** WAN *Select the interface that matches your GuestNet*
|
|
**interface2** GuestNet *Select the interface connected to the internet*
|
|
**proto** ip *Select the protocol, IP in our example*
|
|
**source** any *The source address, leave on any*
|
|
**src-port** any *The source port to shape, leave on any*
|
|
**destination** any *The destination IP to shape, leave on any*
|
|
**dst-port** any *The destination port to shape, leave on any*
|
|
**direction** out *Match outgoing packages (upload)*
|
|
**target** PipeUp-1Mbps *Select the Upload pipe*
|
|
**description** GuestNetUpload *Enter a descriptive name*
|
|
====================== =================== =====================================================
|
|
|
|
Now press |apply| to activate the traffic shaping rules.
|