mirror of
https://github.com/opnsense/docs
synced 2024-11-09 01:10:33 +00:00
142 lines
3.0 KiB
ReStructuredText
142 lines
3.0 KiB
ReStructuredText
**Orange France IPTV setup**
|
||
============================
|
||
|
||
**Original Author:** Kev Willers
|
||
|
||
**Introduction**
|
||
-----------------
|
||
This guide is for setting up Orange France IPTV and assumes you already have a working internet connection and the
|
||
os-igmp-proxy plugin installed.
|
||
|
||
|
||
**Getting ready**
|
||
-----------------
|
||
|
||
Orange uses two VLANs for TV. VLAN 838 and 840
|
||
Create and assign them as shown.
|
||
|
||
.. image:: images/tv_image01.png
|
||
:width: 100%
|
||
|
||
Take note of the PCP values
|
||
|
||
Assign the VLANs as shown and also assign TVLAN for use later.
|
||
|
||
.. image:: images/tv_image02.png
|
||
:width: 100%
|
||
|
||
igb0 is the WAN in this example. Select the interface that corresponds to WAN in your setup.
|
||
|
||
TVLAN is assigned to a free port on your router which the TVDecoder is plugged into later.
|
||
|
||
|
||
**VLAN 838 setup**
|
||
------------------
|
||
|
||
.. image:: images/tv_image03.png
|
||
:width: 100%
|
||
|
||
.. image:: images/tv_image04.png
|
||
:width: 100%
|
||
|
||
SEND OPTIONS
|
||
|
||
dhcp-client-identifier 1:xx:xx:xx:xx:xx:xx,
|
||
REPLACE xx with MAC Address of the Livebox (NOT the TVDecoder) the leading 1 is important
|
||
|
||
dhcp-class-identifier "sagem",
|
||
|
||
user-class "'FSVDSL_livebox.MLTV.softathome.Livebox3".
|
||
NOTE the leading ‘ before the string. Also although not strictky necessary Livebox3 part of the string is for LiveBox3 users if you are Livebox4 user change as required.
|
||
|
||
|
||
REQUEST OPTIONS
|
||
|
||
subnet-mask,routers, ntp-servers, www-server, classless-routes
|
||
|
||
|
||
**VLAN 840 setup**
|
||
------------------
|
||
|
||
.. image:: images/tv_image05.png
|
||
:width: 100%
|
||
|
||
.. image:: images/tv_image06.png
|
||
:width: 100%
|
||
|
||
The dummy IP address is important or IGMPproxy does not start
|
||
|
||
|
||
**TVLAN setup**
|
||
---------------
|
||
|
||
(not needed to make things work, but much neater config and prevents IGMPproxy warning messages on LAN)
|
||
|
||
|
||
.. image:: images/tv_image07.png
|
||
:width: 100%
|
||
|
||
|
||
.. image:: images/tv_image08.png
|
||
:width: 100%
|
||
|
||
|
||
Use a different subnet to current LAN
|
||
|
||
Turn on the DHCP service for TVLAN
|
||
|
||
NOTE YOU MUST specify the ORANGE DNS servers for the TV to work
|
||
|
||
.. image:: images/tv_image09.png
|
||
:width: 100%
|
||
|
||
Now reboot and you should have an IP address on VLAN 838 of 10.x.x.x
|
||
|
||
|
||
**IGMPproxy setup**
|
||
-------------------
|
||
|
||
Ensure you are running OPNsense 18.7.4 or later
|
||
|
||
Then configure IGMPproxy as follows
|
||
|
||
.. image:: images/tv_image10.png
|
||
:width: 100%
|
||
|
||
.. image:: images/tv_image11.png
|
||
:width: 100%
|
||
|
||
|
||
NOTE: downstream interface is TVLAN
|
||
|
||
.. image:: images/tv_image12.png
|
||
:width: 100%
|
||
|
||
|
||
**FIREWALL setup**
|
||
------------------
|
||
|
||
We need to allow traffic to flow on the VLANs and TVLAN and also to connect with Orange servers
|
||
|
||
.. image:: images/tv_image13.png
|
||
:width: 100%
|
||
|
||
.. image:: images/tv_image14.png
|
||
:width: 100%
|
||
|
||
NOTE the Source is "*"
|
||
|
||
.. image:: images/tv_image15.png
|
||
:width: 100%
|
||
|
||
And finally the outbound
|
||
|
||
.. image:: images/tv_image16.png
|
||
:width: 100%
|
||
|
||
Make sure you have clicked Save & Apply
|
||
|
||
It is advisable at this point to reboot the system.
|
||
|
||
Plug in your TVDecoder to the port defined for TVLAN, turn on the decoder and after a few minutes you should see TV.
|