mirror of
https://github.com/opnsense/docs
synced 2024-11-15 06:12:58 +00:00
160 lines
5.3 KiB
ReStructuredText
160 lines
5.3 KiB
ReStructuredText
========================================
|
|
IPsec - Policy based public key setup
|
|
========================================
|
|
|
|
This example utilises the new options available in OPNsense 23.1 to setup a site to site tunnel in policy mode
|
|
between two OPNsense machines using key pairs.
|
|
|
|
.. contents:: Index
|
|
|
|
--------------------------------
|
|
Network topology
|
|
--------------------------------
|
|
|
|
The schema below describes the situation we are implementing. Two networks (A,B) and a transit network (10.10.1.0/24)
|
|
to peer both firewalls.
|
|
|
|
.. nwdiag::
|
|
:scale: 100%
|
|
|
|
nwdiag {
|
|
|
|
span_width = 90;
|
|
node_width = 180;
|
|
network A {
|
|
address = "10.1.0.0/24";
|
|
pclana [label="PC Site A\n10.1.0.20",shape="cisco.pc"];
|
|
fwa [shape = "cisco.firewall", address="10.1.0.1/24"];
|
|
}
|
|
network Ext {
|
|
address = "10.10.1.0/24";
|
|
label = "Ext";
|
|
fwa [shape = "cisco.firewall", address="10.10.1.1/24"];
|
|
fwb [shape = "cisco.firewall", address="10.10.1.2/24"];
|
|
}
|
|
network B {
|
|
address = "192.168.1.0/24"
|
|
fwb [shape = "cisco.firewall", address="192.168.1.20"];
|
|
pclanb [label="PC Site B\n192.168.1.20",shape="cisco.pc"];
|
|
}
|
|
|
|
|
|
}
|
|
|
|
|
|
--------------------------------
|
|
Preparations
|
|
--------------------------------
|
|
|
|
Since our policy based setup doesn't require interfaces, gateways and routes, we only need to make sure the IPsec
|
|
module is enabled on the Connections tab and Key pairs are registered for both hosts.
|
|
|
|
..................................
|
|
Key pairs
|
|
..................................
|
|
|
|
Go to the :menuselection:`VPN->IPsec->Key Pairs` option in the menu and create a new key on both hosts, then copy the public part
|
|
from Site A to Site B and vise versa. Keys may easily be generated with the gear button in the Key type field.
|
|
|
|
|
|
--------------------------------
|
|
Setting up the IPsec connection
|
|
--------------------------------
|
|
|
|
In order to setup a simple (and common) IPsec connection, we go to :menuselection:`VPN->IPsec->Connections` and add
|
|
a new entry.
|
|
|
|
|
|
.....................
|
|
General settings
|
|
.....................
|
|
|
|
Side by side the following general settings need to be set in this case, which configures the first part of the security association between
|
|
both sites:
|
|
|
|
===============================================================
|
|
|
|
======================= =================== ===================
|
|
Property site A site B
|
|
======================= =================== ===================
|
|
Local addresses **10.10.1.1** **10.10.1.2**
|
|
Remote addresses **10.10.1.2** **10.10.1.1**
|
|
======================= =================== ===================
|
|
|
|
Press <save> to go to the next step.
|
|
|
|
.. Note::
|
|
|
|
One may omit the local address if any address may be used to initiate the connection from, other valid options
|
|
are also mentioned in the help text of the attribute.
|
|
|
|
|
|
.....................
|
|
Authentication
|
|
.....................
|
|
|
|
Next we will need to add local authentication (add a new record in the local grid):
|
|
|
|
===============================================================
|
|
|
|
======================= =================== ===================
|
|
Property site A site B
|
|
======================= =================== ===================
|
|
Authentication Public Key Public Key
|
|
Id **hostA** **hostB**
|
|
Public Keys **hostA-key** **hostB-key**
|
|
======================= =================== ===================
|
|
|
|
Then we need to set Pre-Shared Key for remote authentication as well:
|
|
|
|
===============================================================
|
|
|
|
======================= =================== ===================
|
|
Property site A site B
|
|
======================= =================== ===================
|
|
Authentication Public Key Public Key
|
|
Id **hostB** **hostA**
|
|
Public Keys **hostB-key** **hostA-key**
|
|
======================= =================== ===================
|
|
|
|
|
|
.. Note::
|
|
|
|
On host A the private key for Host A should be known and only the public key of Host B, Host B is exactly the oposite.
|
|
|
|
|
|
.....................
|
|
Children
|
|
.....................
|
|
|
|
Finally we may add a child which will add security policies and kernel routes.
|
|
|
|
|
|
======================= =================== ===================
|
|
Property site A site B
|
|
======================= =================== ===================
|
|
Mode Tunnel Tunnel
|
|
Policies [checked] [checked]
|
|
Local **192.168.1.0/24** **10.0.1.0/24**
|
|
Remote **10.0.1.0/24** **192.168.1.0/24**
|
|
======================= =================== ===================
|
|
|
|
.....................
|
|
Save and apply
|
|
.....................
|
|
|
|
Finally save the settings and hit apply on the connections page to establish the tunnel.
|
|
|
|
--------------------------------
|
|
Validate
|
|
--------------------------------
|
|
|
|
Now can check if the tunnel is active on both side using the status overview in :menuselection:`VPN->IPsec->Status Overview`
|
|
|
|
--------------------------------
|
|
Install firewall policies
|
|
--------------------------------
|
|
|
|
With the tunnel active, all that remains is to accept traffic on this tunnel using the :menuselection:`Firewall->Rules->IPsec`
|
|
menu option.
|