mirror of https://github.com/opnsense/docs
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
95 lines
3.6 KiB
ReStructuredText
95 lines
3.6 KiB
ReStructuredText
====================================
|
|
Quickstart / getting started
|
|
====================================
|
|
|
|
------------------------------------
|
|
Intro
|
|
------------------------------------
|
|
|
|
After opening the box of your just delivered appliance, there should be a quickstart included.
|
|
Your OPNsense® appliance has been pre-installed with the OPNsense® Business Edition software
|
|
|
|
This quickstart applies to all of the devices acquired from the OPNsense® Shop (https://shop.opnsense.com/), which includes
|
|
the following series:
|
|
|
|
|
|
========= ============ ============================= ==================
|
|
Serie Formfactor Range Network driver(s)
|
|
========= ============ ============================= ==================
|
|
DEC6XX Desktop Entry level igb
|
|
DEC7XX Desktop Midrange igb, ax
|
|
DEC8XX Desktop Enterprise igb, ax
|
|
DEC26XX Rack Entry level igb
|
|
DEC27XX Rack Midrange igb, ax
|
|
DEC38XX Rack Enterprise igb, ax
|
|
DEC40XX Rack Enterprise / Datacenter igb, ax, [ice]
|
|
========= ============ ============================= ==================
|
|
|
|
------------------------------------
|
|
Port assignments
|
|
------------------------------------
|
|
|
|
The Ethernet ports of the appliance are assigned as follows:
|
|
|
|
Port **0** is assigned to LAN with IP address :code:`192.168.1.1` and has a DHCP Server running with IP range
|
|
from :code:`192.168.1.100` to :code:`192.168.1.199`.
|
|
|
|
Port **1** is assigned to WAN and uses DHCP Client to obtain an IP-address.
|
|
|
|
Additional ports available on the device are left unconfigured, you can assign them later using :menuselection:`Interfaces->Assignments`.
|
|
|
|
.. Note::
|
|
|
|
Ports on the devices are all numbered, 0-**X** (e.g. 0,1,2) for all 1 gbps standard ethernet ports,
|
|
X0-X\ **X** for SFP+ ports (e.g. X0, X1), XXV0-XXV\ **X** for SFP28 ports (e.g. XXV0, XXV1).
|
|
The numbering corresponds with the driver numbering, e.g. port **0** is usually :code:`igb0`, see the product
|
|
range for drivers used in the different models
|
|
|
|
------------------------------------
|
|
Console connectivity
|
|
------------------------------------
|
|
|
|
The supplied USB-cable can be used to gain console access (settings are: 115200 8N1).
|
|
Console access is restricted with a login. Use the following credentials:
|
|
|
|
* user : **root**
|
|
* password : **opnsense**
|
|
|
|
------------------------------------
|
|
Web interface
|
|
------------------------------------
|
|
|
|
To gain access to the web interface (default IP: :code:`192.168.1.1`) use the following credentials:
|
|
|
|
* user : **root**
|
|
* password : **opnsense**
|
|
|
|
------------------------------------
|
|
Next steps
|
|
------------------------------------
|
|
|
|
After performing basic setup, activate your OPNsense Business Edition license token and then update your system or
|
|
change to community when not planning to use the supplied license.
|
|
(The firmware update module is located at :menuselection:`System>Firmware>Settings`)
|
|
|
|
**Option 1**: use Business Edition license
|
|
|
|
.. image:: ./images/quickstart_be.png
|
|
:width: 500px
|
|
|
|
**Option 2**: use Community Edition
|
|
|
|
.. image:: ./images/quickstart_community.png
|
|
:width: 500px
|
|
|
|
|
|
.. Note::
|
|
|
|
The OPNsense Business Edition license token is sent by email including instructions on how to activate.
|
|
|
|
.. Tip::
|
|
|
|
Always update your device after gaining access to the internet, updates are usually available once the device
|
|
reaches your destination. Just go to the status tab in the firmware section, press "check for updates" and install the
|
|
pending updates.
|