============= Aliases ============= Aliases are named lists of networks, hosts or ports that can be used as one entity by selecting the alias name in the various supported sections of the firewall. These aliases are particularly useful to condense firewall rules and minimize changes. Aliases can be added, modified and removed via :menuselection:`Firewall --> Aliases`. ----------- Alias Types ----------- OPNsense offers the following alias types: +------------------+------------------------------------------------------+ | Type | Description | +==================+======================================================+ | Hosts | Single hosts by IP or Fully Qualified Domain Name or| | | host exclusions (starts with "!" sign) | +------------------+------------------------------------------------------+ | Networks | Entire network p.e. 192.168.1.1/24 or network | | | exclusion eg !192.168.1.0/24 | +------------------+------------------------------------------------------+ | Ports | Port numbers or a port range like 20:30 | +------------------+------------------------------------------------------+ | MAC addresses | MAC address or partial mac addresses like | | | :code:`f4:90:ea` | +------------------+------------------------------------------------------+ | URL (IPs) | A table of IP addresses that are fetched once | +------------------+------------------------------------------------------+ | URL Tables (IPs) | A table of IP addresses that are fetched on regular | | | intervals. | +------------------+------------------------------------------------------+ | GeoIP | Select countries or whole regions | +------------------+------------------------------------------------------+ | Network group | Combine different network type aliases into one | +------------------+------------------------------------------------------+ | Dynamic IPv6 Host| A Host entry that will auto update on a prefixchange | +------------------+------------------------------------------------------+ | Internal | Internal aliases which are managed by the product | | (automatic) | | +------------------+------------------------------------------------------+ | External | Externally managed alias, this only handles the | | (advanced) | placeholder. Content is set from another source | | | (plugin, api call, etc) | +------------------+------------------------------------------------------+ .................. Hosts .................. Hosts can be entered as a single IP address, a range (separated with a minus sign, e.g. :code:`10.0.0.1-10.0.0.10`) or a fully qualified domain name. When using a fully qualified domain name, the name will be resolved periodically (default is each 300 seconds). Sample Let's say we want to create an alias table for **www.youtube.com** .. image:: images/aliases_host.png :width: 100% **Apply changes** and look at the content of our newly created pf table. Go to :menuselection:`Firewall --> Diagnostics --> Aliases` and select our newly created youtube table. .. image:: images/pftable_youtube.png :width: 100% As you can see there are multiple IP addresses for this domain. .. Tip:: To change the alias domain resolve interval, go to :menuselection:`Firewall --> Settings --> Advanced` and set **Aliases Resolve Interval** to the number of seconds to refresh. Hosts type Aliases can contain exclusion hosts. Exclusion addresses starts with "!" sign (eg !192.168.0.1) and can be used to exclude hosts from Network Group Aliases. .. Warning:: Please note thet the **Flush** action is not persistent! **"flush"** means flush the current contents of the alias, which will be repopulated when it's not an external type, so flush in most cases isn't very useful. Same behaviour applies to the API call `alias_util flush `_ .................. Networks .................. Networks are specified in Classless Inter-Domain Routing format (CIDR). Use the the correct CIDR mask for each entry. For instance a /32 specifies a single IPv4 host, or /128 specifies a single IPv6 host, whereas /24 specifies 255.255.255.0 and /64 specifies a normal IPv6 network. Network type Aliases can contain exclusion hosts or networks. Exclusion addresses starts with "!" sign (eg !192.168.0.0/24) and can be used to exclude hosts or networks from current Alias or Network Group Alias Apart from the CIDR notation, one could also use a `wildcard mask `__ to match ranges of hosts or networks. .. Tip:: To match all servers ending at .1 in the 192.168.X.1 networks, use a wildcard definition like :code:`192.168.0.1/0.0.255.0` .................. Ports .................. Ports can be specified as a single number or a range using a colon **:**. For instance to add a range of 20 to 25 one would enter 20:25 in the **Port(s)** section. .................. MAC addresses .................. Hardware mac addresses can be specified as a (partial) hex value, such as :code:`F4:90:EA` to match all addresses from Deciso or :code:`f4:90:ea:00:00:01` to match a single item (the input is case insensitive). The way these aliases function is approximately the same as hostnames in host type aliases, they are resolved on periodic intervals from the :code:`arp` and :code:`ndp` tables. .. Warning:: Please be aware that hardware addresses can be spoofed (https://en.wikipedia.org/wiki/MAC_spoofing), which doesn't make filters on them more secure than ip addresses in any way. .. Note:: Since mappings between addresses and mac addresses are resolved periodically the actual situation can differ, you can always check :menuselection:`Firewall -> Diagnostics -> Aliases` to inspect the current contents of the alias. .................. URL Tables .................. URL tables can be used to fetch a list of IP addresses from a remote server. There are several IP lists available for free, most notably are the "Don't Route Or Peer" lists from Spamhaus. .................. GeoIP .................. With GeoIP alias you can select one or more countries or whole continents to block or allow. Use the *toggle all* checkbox to select all countries within the given region. .. image:: images/firewall_geoip_alias.png :width: 100% To use GeoIP, you need to configure a source in the :menuselection:`Firewall --> Aliases -> GeoIP settings` tab, the most commonly used source is MaxMind, for which we have a how-to available : :doc:`how-tos/maxmind_geo_ip` The configured url should point to a zip file containing the following csv files: .. list-table:: Title :widths: 50 25 25 25 :header-rows: 1 * - Filename - Purpose - Format - Example * - %prefix%-locations-en.csv - maps geo locations to iso countries - geoname_id,,,,country_iso_code - 1,,,,NL * - %prefix%-IPv4.csv - IPv4 networks - network,geoname_id - 2.21.241.0/28,1 * - %prefix%-IPv6.csv - IPv6 networks - network,geoname_id - 2001:470:1f15:210::/64,1 The :code:`%prefix%` can be used to identify the product and/or vendor, in MaxMind's case these files are named :code:`GeoLite2-Country-Locations-en.csv`, :code:`GeoLite2-Country-Blocks-IPv4.csv`, :code:`GeoLite2-Country-Blocks-IPv6.csv` for example. .. Tip:: Geo ip lists can be rather large, especially when using IPv6. When creating rules, always try to minimize the number of addresses needed in your selection. A selection of all countries in the world not being the Netherlands can usually be rewritten as only addresses from the Netherlands for example. .. Tip:: If the number of items is larger than the allocated alias size, you can assign more memory to aliases. :menuselection:`Firewall --> Settings --> Advanced : Firewall Maximum Table Entries` .................. Network group .................. Combine different network type aliases into one, this type of alias accepts other host type aliases (networks, hosts, ...). Although nesting is possible with other alias types as well, this type only displays valid aliases easing administration, functionally a :code:`Networks` type alias can do the same but uses a different presentation. .................. Dynamic IPv6 Host .................. An IPv6 Dynamic Host is used where the system is using a dynamic prefix on the LAN, a tracking interface. When the prefix changes, either due to the ISP changing the prefix at will or the prefix changes when the WAN connection is reset, any alias containing an address of a client such as a server on the LAN would no longer be valid. For example, you obtain a prefix 2001:db8:2222:2800::/56. You have a /56 prefix and if the tracking id was set to 0 for your LAN, you would have an address range on your LAN of 2001:db8:2222:2800:: to 2001:db8:2222:2800:FFFF:FFFF:FFFF:FFFF. You want to run a server on your LAN that is accessable from the WAN so you give it a static address of 2001:db8:2222:2800:1000:1000::1 and create a rule allowing traffic to access the server. When your prefix changes, that static address is no longer valid, so you must use the Dynamic IPv6 Host to create an alias address for the firewall entry that automatically tracks the prefix and changes the rule. The Dynamic Host Alias will always split on the /64 boundary, it will take the upper 64 bits from the interface you select and the lower 64 bits from the address you enter. It does not matter what size your prefix delegation is. Create a new IPv6 Dynamic Host alias and enter only the suffix of the address, in this example, we will enter the lower 64 bits of the address, you would enter ::1000:1000:0000:1, note the '::' at the start of the address, you MUST always start the address with a '::'. You do not need to enter a size after the address i.e. /128 as that is automatically assumed. Select the interface you wish to use for the source of the uppper 64 bits, in this case we will select the LAN interface. When the prefix changes, the alias address will then be updated in the firewall rules, let's say your prefix changes to 2001:db8:2222:3200::/56 the rule updates and the entry for your server in the firewall would update automatically to be 2001:db8:2222:3200:1000:1000::1 Let's take another example, you have a /48 prefix delegation, you have two LAN interfaces and a server on each. You would need to create two separate Dynamic IPv6 Host entries, one for each LAN. For simplicities sake we will use the same address for each server on each interface, you would enter ::aaaa:bbbb:cccc:0001 as the address. ========================================= =============================================== Upper 64 bits, taken from LAN 1 Interface Lower 64 bits - Your server address Server 1: 2a02:1234:5678:0000 aaaa:bbbb:cccc:0001 ========================================= =============================================== *Server 1 GUA address is: 2a02:1234:5678:0000:aaaa:bbbb:cccc:0001* =========================================================================================== ========================================= =============================================== Upper 64 bits, taken from LAN 2 Interface Lower 64 bits - Your server address Server 2: 2a02:1234:5678:0001 aaaa:bbbb:cccc:0001 ========================================= =============================================== *Server 2 GUA address is: 2a02:1234:5678:0001:aaaa:bbbb:cccc:0001* =========================================================================================== The prefix changes, in this case we have a /48 prefix, so the new prefix is 2a02:1234:5679/48 our aliases would update to give us the following addresses: ========================================= =============================================== LAN 1: Server 1 GUA address is: 2a02:1234:5679:0000:aaaa:bbbb:cccc:0001 LAN 2: Server 2 GUA address is: 2a02:1234:5679:0001:aaaa:bbbb:cccc:0001 ========================================= =============================================== You may enter multiple addresses, for example if you have several servers on the same LAN segment, just add the suffix for each one. In the example below we have three servers. .. image:: images/alias_dynamic_ipv6_host.png :width: 100% .................. External .................. The contents for external alias types is not administered via our normal alias service and can be practical in scenarios where you want to push new entries from external programs. Such as specific lockout features or external tools feeding access control to your firewall. In :menuselection:`Firewall --> Diagnostics --> Aliases` you can always inspect the current contents of the external alias and add or remove entries immediately. .. Tip:: When changing alias contents which are used on firewall rules with state tracking enabled, you might need to remove the specific state before the new rule turns active. (see :menuselection:`Firewall --> Diagnostics --> States Dump` ) .. Tip:: Since external alias types won't be touched by OPNsense, you can use :code:`pfctl` directly in scripts to manage its contents. (e.g. :code:`pfctl -t MyAlias -T add 10.0.0.3` to add **10.0.0.3** to **MyAlias**) .................................... Internal (automatic) .................................... Internal aliases are prefixed with :code:`__` so they are easy to identify and can't overlap with any user defined ones. These aliases help you to determine what the content is for some internal concepts such as "LAN network". Using the :menuselection:`Firewall->Diagnostics->Aliases` menu item you can inspect their contents at any time. ---------------------------------- Using Aliases in Firewall Rules ---------------------------------- Aliases can be used in firewall rules to ease administration of large lists. For instance we might need a list of remote IP addresses that should have access to certain services, when anything changes we only need to update the list. Let's create a simple alias to allow 3 remote IP addresses access to an ipsec server for a site to site tunnel connection: * 192.168.100.1 * 192.168.200.2 * 192.168.202.2 .. image:: images/alias_remote_ipsec.png :width: 100% We call our list remote_ipsec and update our firewall rules accordingly. .. image:: images/alias_firewall_rules.png :width: 100% .. Note:: The list icon identifies a rule with an alias. --------------------------------- Export / Import --------------------------------- The alias admin page (:menuselection:`Firewall --> Aliases`) contains a download and an upload button in the footer of the table, with this feature you can merge aliases into the configuration and download a :code:`json` formatted list of all aliases in the system. Since data is validated before insertion, it shouldn't be possible to import defective data (if the import fails, a list of errors is presented). .. Tip:: When performing migrations, sometimes its easier to change multiple items at once in a text editor. This feature can easily be used to facilitate that, with limiting risk of a broken configuration (since items are validated equally as single item input would do). --------------------------------- Add new entries using our API --------------------------------- The endpoints from the alias_util can easily be used to push new entries into an alias (or remove existing ones). In case of an external alias these items won't be persistent over reboots, which can be practical in some use-cases (large frequent changing lists for example). The document ":doc:`/development/how-tos/api`" contains the steps needed to create an api key and secret, next you can just call the same endpoint the user interface would. Below you see how to add **10.0.0.2** to an alias named **MyAlias** using an insecure connection (self-signed cert) on the host **opnsense.firewall** with :code:`curl`. The verbose option provides more details about the data exchanged between the two machines. :: curl \ --header "Content-Type: application/json" \ --basic \ --user "key:secret" \ --request POST \ --insecure \ --verbose \ --data '{"address":"10.0.0.2"}' \ https://opnsense.firewall/api/firewall/alias_util/add/MyAlias .. Note:: Adding aliases using :code:`/api/firewall/alias_util/add/` is only supported for Host, Network and External type aliases ---------- Exclusions ---------- Pf firewall tables support exceptions (or exclusion) of addresses. This feature can be used in one Alias or in combined (Network group type) Aliases. See (https://www.freebsd.org/doc/handbook/firewalls-pf.html 30.3.2.4). -------- Nesting -------- For host and network alias types nesting is possibility, this can simplify management a lot since single items can be named properly and grouped into sections for administration. For example, we define 4 servers among 2 critical using different rulesets: * server_a {10.0.1.1} * server_b {10.0.1.2} * server_c {10.0.1.100} * server_d {10.0.1.200} * critical_servers {server_a , server_b} * other_servers {server_c , server_d} * servers { critical_servers , other_servers}. The alias :code:`servers` will contain all 4 addresses after configuration. There is also a possibility to combine different Aliases with Aliases, consisting of exclusions. For example, there is Alias "FireHOL" that use extensive externl drop-list and two Aliases that contains subnet and hosts exclusions. It is possible to create Network group (combined) Alias ("FireHOL_with_exclusions"): * FireHOL {https://raw.githubusercontent.com/firehol/blocklist-ipsets/master/firehol_level1.netset} * subnets_exclusions {!127.0.0.0/8, !0.0.0.0/8} * hosts_exclusions {!8.8.8.8} * FireHOL_with_exclusions {FireHOL, subnets_exclusions, hosts_exclusions} :code:`FireHOL_with_exclusions` Alias will contain all records from FireHOL Alias excluding addresses from exclusions Aliases. It's always good to check if an address is included in the Alias via :menuselection:`Firewall --> Diagnostics --> pfTable` --------------------------------- Spamhaus --------------------------------- The Spamhaus Don't Route Or Peer Lists DROP (Don't Route Or Peer) and EDROP are advisory "drop all traffic" lists, consisting of netblocks that are "hijacked" or leased by professional spam or cyber-crime operations (used for dissemination of malware, trojan downloaders, botnet controllers). The DROP and EDROP lists are a tiny subset of the SBL, designed for use by firewalls and routing equipment to filter out the malicious traffic from these netblocks. *Source :* https://www.spamhaus.org/drop/ Downloads * `DROP list `__ * `EDROP list `__ To setup the DROP and EDROP lists in combination with the firewall rules, read: :doc:`how-tos/edrop`