mirror of
https://github.com/opnsense/docs
synced 2024-10-30 21:20:20 +00:00
Vendor/Hardware: add central SFP(+) compatibility list for OPNsense appliances
This commit is contained in:
parent
22e2a930db
commit
44f50b10fe
196
source/hardware/sfp_compatibility.rst
Normal file
196
source/hardware/sfp_compatibility.rst
Normal file
@ -0,0 +1,196 @@
|
||||
====================================
|
||||
SFP(+) Compatibility
|
||||
====================================
|
||||
|
||||
Most OPNsense® appliances feature 10 Gigabit SFP+ cages powered by AMD® `axgbe` to allow
|
||||
for flexible connectivity. Different SFP(+) transceiver modules can be used to connect to different types of
|
||||
media (e.g. copper or fiber) depending on your needs.
|
||||
|
||||
Most enterprise & datacenter OPNsense® appliances also feature 25 Gigabit capable SFP28 cages powered by Intel® `ice`.
|
||||
|
||||
Below you can find some general information as well as a list of tested SFP(+)/SFP28 transceiver modules
|
||||
that are verified to work with OPNsense® appliances.
|
||||
|
||||
.. tip::
|
||||
|
||||
If you are using an SFP(+)/SFP28 module on one of the OPNsense® appliances that is not listed below but is working
|
||||
properly, consider submitting a Pull Request to `our documentation <https://github.com/opnsense/docs>`__ to extend the list.
|
||||
Any contribution is welcome!
|
||||
|
||||
=====================================================================================================================
|
||||
|
||||
.. contents:: Table of Contents
|
||||
:local:
|
||||
|
||||
|
||||
**General Information**
|
||||
=====================================================================================================================
|
||||
|
||||
There are a lot of transceiver modules available on the market and they are usually one of the following types:
|
||||
|
||||
- Copper RJ45
|
||||
|
||||
Often used for connectivity up to a distance of 100 meters maximum and are
|
||||
relatively inexpensive.
|
||||
|
||||
.. warning::
|
||||
|
||||
RJ45 SFP+ modules (10GBASE-T) can run at high operating temperatures in comparison to Fiber or DAC modules. Only
|
||||
the datacenter level OPNsense® appliances are equipped with passive cooling for the SFP+ cages. If the ambient
|
||||
temperature does not exceed 50°C, RJ45 SFP+ modules can be used in all OPNsense® appliances without issue.
|
||||
|
||||
- Single-mode optical fiber (SMF)
|
||||
|
||||
Often used for communication across large distances (100+km) and usually connected with either Simplex-LC or
|
||||
Duplex-LC OS2 patch cords. It can potentially carry more bandwidth than Multi-mode fiber, but the equipment
|
||||
needed to use SMF is often more expensive in comparison to MMF.
|
||||
|
||||
- Multi-mode optical fiber (MMF)
|
||||
|
||||
Multi-mode fiber is the alternative for SMF (up to 550M for 10Gb/s), often used for backbone applications in
|
||||
buildings and usually connected with OM3 Duplex-LC patch cords.
|
||||
|
||||
- Direct-Attach (DAC)
|
||||
|
||||
For short ranges (up to 10M), often a popular choice due to low cost and low latency.
|
||||
|
||||
.. attention::
|
||||
|
||||
Most transceiver modules are available for purchase with a variety of different programming options for
|
||||
compatibility with different vendors. Unless specified otherwise, all modules are assumed to have
|
||||
the generic / MSA standard default programming.
|
||||
|
||||
|
||||
|
||||
**Axgbe**
|
||||
=====================================================================================================================
|
||||
|
||||
.. note::
|
||||
|
||||
10 Mbit/s is currently not supported by Axgbe.
|
||||
|
||||
--------------------------------------
|
||||
1G Single-mode optical fiber
|
||||
--------------------------------------
|
||||
|
||||
========= ============================== ======= =========================
|
||||
Vendor Type Speed Notes
|
||||
========= ============================== ======= =========================
|
||||
BeanField 100BASE-BX0-D53 100Mb
|
||||
FlexOptix S.B1312.20.DL BiDi LX 1G Tested module rated for 20km,
|
||||
other distances are assumed to function properly
|
||||
FlexOptix S.B1312.10.D 1G Tested module rated for 10km,
|
||||
other distances are assumed to function properly
|
||||
FS SFP-FE-BX 100Mb
|
||||
FS SFP-GE-BX 1G
|
||||
MikroTik S-53LC20D 1G
|
||||
TP-Link 1000Base-BX WDM Bi-Directional 1G
|
||||
Ubiquiti UACC-OM-SM-1G-S 1G
|
||||
========= ============================== =================================
|
||||
|
||||
--------------------------------------
|
||||
10G Single-mode optical fiber
|
||||
--------------------------------------
|
||||
|
||||
========= ============================== ======= =========================
|
||||
Vendor Type Speed Notes
|
||||
========= ============================== ======= =========================
|
||||
FlexOptix P.1396.10 SMF 1310nm Duplex-LC 10G Tested module rated for 10km,
|
||||
other distances are assumed to function properly
|
||||
FlexOptix P.B1696.10.DA + P.B1696.10.AD 10G Simplex-LC. Two complementary modules are needed.
|
||||
========= ============================== ======= =========================
|
||||
|
||||
--------------------------------------
|
||||
10G Multi-mode optical fiber
|
||||
--------------------------------------
|
||||
|
||||
============= ============================== ======= =========================
|
||||
Vendor Type Speed Notes
|
||||
============= ============================== ======= =========================
|
||||
Cisco-Finisar SFP-10G-SR 10G
|
||||
FS SFP-10GSR-85 10G
|
||||
FS SFP-10/25GR-85 10G
|
||||
IBM-Finisar FTLX8571D3BCL-IC 10G
|
||||
Intel AFBR-709DMZ-IN2 10G
|
||||
Mellanox MFM1T01A-SR 10G
|
||||
Ubiquiti UF-MM-10G 10G
|
||||
Uptimed UP-TR-SR-CI 10G 10G
|
||||
============= ============================== ======= =========================
|
||||
|
||||
--------------------------------------
|
||||
1G Copper RJ45
|
||||
--------------------------------------
|
||||
|
||||
========== ============================== ============= =========================
|
||||
Vendor Type Speed Notes
|
||||
========== ============================== ============= =========================
|
||||
FS SFP-GB-GE-T 10/100/1000Mb
|
||||
HP (Aruba) Instant On 1G
|
||||
MikroTik S-RJ01 10/100/1000Mb
|
||||
StarTech GLCTST 1G
|
||||
Ubiquiti UF-RJ45-1G 10/100/1000Mb
|
||||
========== ============================== ============= =========================
|
||||
|
||||
--------------------------------------
|
||||
10G Copper RJ45
|
||||
--------------------------------------
|
||||
|
||||
========== ============================== ============= =========================
|
||||
Vendor Type Speed Notes
|
||||
========== ============================== ============= =========================
|
||||
FS SFP-10G-T 10G
|
||||
Uptimed UP-TR-10G-RJ45-CI 1/2.5/5/10G Will always link at 10G on axgbe,
|
||||
maximum speed is determined by link partner
|
||||
========== ============================== ============= =========================
|
||||
|
||||
--------------------------------------
|
||||
10G Direct-Attach
|
||||
--------------------------------------
|
||||
|
||||
========== ============================== ============= =========================
|
||||
Vendor Type Speed Notes
|
||||
========== ============================== ============= =========================
|
||||
Aruba SFP+ DAC 10G
|
||||
Cisco SFP-H10GB-CU1M 10G
|
||||
FS SFPP-PC02 10G
|
||||
MikroTik XS+DA0001 10G Rated for 1/10/25G, only links on 10G
|
||||
Netgear AXC761 10G
|
||||
Startech DACSFP10G1M 10G
|
||||
Ubiquiti UniFi 1m DAC 10G
|
||||
========== ============================== ============= =========================
|
||||
|
||||
**ICE**
|
||||
=====================================================================================================================
|
||||
|
||||
--------------------------------------
|
||||
25G Single-mode optical fiber
|
||||
--------------------------------------
|
||||
|
||||
========= ============================== ======= =========================
|
||||
Vendor Type Speed Notes
|
||||
========= ============================== ======= =========================
|
||||
FlexOptix P.B1625G.10.ADI 25G Tested module rated for 10km,
|
||||
other distances are assumed to function properly
|
||||
========= ============================== ======= =========================
|
||||
|
||||
--------------------------------------
|
||||
25G Multi-mode optical fiber
|
||||
--------------------------------------
|
||||
|
||||
========= ============================== ======= =========================
|
||||
Vendor Type Speed Notes
|
||||
========= ============================== ======= =========================
|
||||
FlexOptix P.8525G.01 25G
|
||||
FS SFP28-25GSR-85 25G
|
||||
Uptimed UP-SFP28-SR-CI 25G
|
||||
========= ============================== ======= =========================
|
||||
|
||||
--------------------------------------
|
||||
25G Direct-Attach
|
||||
--------------------------------------
|
||||
|
||||
========= ============================== ======= =========================
|
||||
Vendor Type Speed Notes
|
||||
========= ============================== ======= =========================
|
||||
FlexOptix P.C3025G.H Passive 25G
|
||||
========= ============================== ======= =========================
|
@ -12,3 +12,4 @@ This chapter contains topics around official OPNsense supplied equipment.
|
||||
hardware/defaults
|
||||
hardware/serial_connectivity
|
||||
hardware/bios
|
||||
hardware/sfp_compatibility
|
||||
|
Loading…
Reference in New Issue
Block a user