Orange France TV How To

source/manual/how-tos/orange_fr_tvf.rst

@@ -0,0 +1,149 @@
+**Orange France IPTV setup**
+============================
+
+**Original Author:** Kev Willers
+
+**Introduction**
+-----------------
+This guide is for setting up Orange France IPTV and assumes you already have a working internet connection.
+
+
+**Getting ready**
+-----------------
+
+Orange uses two VLANs for TV. VLAN 838 and 840 
+Create and assign them as shown.
+
+.. image:: images/tv_image01.png
+	:scale: 100%
+
+Take note of the PCP values
+
+Assign the VLANs as shown and also assign TVLAN for use later. 
+
+.. image:: images/tv_image02.png
+	:scale: 100% 
+
+igb0 is the WAN in this example. Select the interface that corresponds to WAN in your setup.
+
+TVLAN is assigned to a free port on your router which the TVDecoder is plugged into later.
+
+
+**VLAN 838 setup**
+------------------
+
+.. image:: images/tv_image03.png
+	:scale: 100% 
+
+.. image:: images/tv_image04.png
+	:scale: 100%
+
+SEND OPTIONS
+
+dhcp-client-identifier 1:xx:xx:xx:xx:xx:xx,      
+REPLACE xx with MAC Address of the Livebox (NOT the TVDecoder) the leading 1 is important
+
+dhcp-class-identifier "sagem",
+
+user-class "'FSVDSL_livebox.MLTV.softathome.Livebox3".   
+NOTE the leading ‘  before the string. Also although not strictky necessary Livebox3 part of the string is for LiveBox3 users if you are Livebox4 user change as required.
+
+
+REQUEST OPTIONS
+
+subnet-mask,routers, ntp-servers, www-server, classless-routes
+
+
+**VLAN 840 setup**
+------------------
+
+.. image:: images/tv_image05.png
+	:scale: 100%
+
+.. image:: images/tv_image06.png
+	:scale: 100%
+
+The dummy IP address is important or IGMPproxy does not start 
+
+
+**TVLAN setup**
+---------------
+
+(not needed to make things work, but much neater config and prevents IGMPproxy warning messages on LAN)
+
+
+.. image:: images/tv_image07.png
+	:scale: 100% 
+
+
+.. image:: images/tv_image08.png
+	:scale: 100% 
+
+
+Use a different subnet to current LAN 
+
+Turn on the DHCP service for TVLAN
+
+NOTE YOU MUST specify the ORANGE DNS servers for the TV to work 
+
+.. image:: images/tv_image09.png
+	:scale: 100% 
+
+Now reboot and you should have an IP address on VLAN 838 of 10.x.x.x
+
+
+**IGMPproxy setup**
+-------------------
+
+The latest version of IGMPproxy has bugs which are being corrected.
+Until that is complete version 1.2 MUST be used.
+
+Install this version using  
+
+# pkg add -f https://pkg.opnsense.org/FreeBSD:11:amd64/snapshots/igmpproxy-0.1_2,1.txz
+
+Then, lock the package in place to stop future updates of OPNsense overwriting it. 
+
+# pkg lock igmpproxy
+
+Once complete we can configure IGMPproxy as follows 
+
+.. image:: images/tv_image10.png
+	:scale: 100% 
+
+.. image:: images/tv_image11.png
+	:scale: 100% 
+
+
+NOTE: downstream interface is TVLAN
+
+.. image:: images/tv_image12.png
+	:scale: 100% 
+
+
+**FIREWALL setup**
+------------------
+
+We need to allow traffic to flow on the VLANs and TVLAN and also to connect with Orange servers
+
+.. image:: images/tv_image13.png
+	:scale: 100% 
+
+.. image:: images/tv_image14.png
+	:scale: 100% 
+
+NOTE the Source is "*"
+
+.. image:: images/tv_image15.png
+	:scale: 100% 
+
+And finally the outbound
+
+.. image:: images/tv_image16.png
+	:scale: 100% 
+
+Make sure you have clicked Save & Apply 
+ 
+It is advisable at this point to reboot the system.
+
+Plug in your TVDecoder to the port defined for TVLAN, turn on the decoder and after a few minutes you should see TV.