mirror of https://github.com/opnsense/docs
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
157 lines
9.2 KiB
ReStructuredText
157 lines
9.2 KiB
ReStructuredText
6 years ago
|
===========================
|
||
|
Network Address Translation
|
||
|
===========================
|
||
|
|
||
|
Network Address Translation (abbreviated to NAT) is a way to separate external and internal networks (WANs and LANs),
|
||
|
and to share an external IP between clients on the interal network. NAT can be used on IPv4 and IPv6. For IPv6,
|
||
|
:doc:`Network Prefix Translation <nptv6>` is also available.
|
||
|
|
||
|
Most of the options below use three different addresses: the source, destination and redirect address. These
|
||
|
addresses are used for the following:
|
||
|
|
||
|
============= ===========================================================================================================
|
||
|
Source Where the traffic comes from. This can often be left on “any”.
|
||
|
Destination Where the traffic is headed. For incoming traffic from outside, this is usually your external IP address.
|
||
|
Redirect Where the traffic should be redirected.
|
||
|
============= ===========================================================================================================
|
||
|
|
||
|
.. warning::
|
||
|
|
||
|
- Network Address Translation should not be relied upon as a security measure.
|
||
|
- Disabling pf will also disable NAT.
|
||
|
|
||
|
--------------------
|
||
|
Some terms explained
|
||
|
--------------------
|
||
|
|
||
|
**BINAT**: NAT generally works in one direction. However, if you have networks of equal size, you can also use BINAT, which is
|
||
|
bidirectional. This can simplify your set-up. If you don't have networks of equal size, you can only use regular NAT.
|
||
|
|
||
|
**NAT reflection**: When a client on the internal network tries to access another client, but using the *external* IP
|
||
|
instead of the internal one (which would the most logical), NAT reflection can rewrite this request so that it uses
|
||
|
the internal IP, in order to avoid taking a detour and applying rules meant for actual outside traffic.
|
||
|
|
||
|
**Pool options**: When there are multiple IPs to choose from, this option will allow regulating which IP gets used.
|
||
|
The default, Round Robin, will simply distribute packets to one server after the other. If you only have one external
|
||
|
IP, this option has no effect.
|
||
|
|
||
|
---------------
|
||
|
Port forwarding
|
||
|
---------------
|
||
|
|
||
|
When multiple clients share an external IP address, any connection not initiated by one of the clients will not
|
||
|
succeed since the firewall will not know where to send the traffic. This can be addressed by creating port
|
||
|
forwarding rules. For example, for a web server behind the firewall to be accessible, ports 80 and 443 need to
|
||
|
be redirected to it.
|
||
|
|
||
|
Port forwarding is also referred to as “Destination NAT” or “DNAT”.
|
||
|
|
||
|
In OPNsense, port forwarding can be set up by navigating to **Firewall->NAT->Port Forward**. Here, you will see
|
||
|
an overview of port forwarding rules. New rules can be added by clicking **Add** in the upper right corner.
|
||
|
|
||
|
When adding a rule, the following fields are available:
|
||
|
|
||
|
========================= =========================================================================================================
|
||
|
Disabled Disable this rule without removing it.
|
||
|
No RDR (NOT) Do not create a redirect rule. Leave this disabled unless you know what you are doing.
|
||
|
Interface Which interface this rule should apply to. Most of the time, this will be WAN.
|
||
|
TCP/IP version IPv4, IPv6 or both.
|
||
|
Protocol In typical scenarios, this will be TCP.
|
||
|
Source Where the traffic comes from. Click “Advanced” to see the other source settings.
|
||
|
Source / Invert Invert match in “Source” field.
|
||
|
Source port range
|
||
|
Destination / Invert Invert match in “Destination” field.
|
||
|
Destination Where the traffic is headed.
|
||
|
Destination port range
|
||
|
Redirect target IP Where to redirect the traffic to.
|
||
|
Redirect target port
|
||
|
Pool Options See “Some terms explained”. The default is to use Round robin.
|
||
|
Description A description to easily find the rule in the overview.
|
||
|
Set local tag Set a tag that other NAT rules and filters can check for.
|
||
|
Match local tag Check for a tag set by another rule.
|
||
|
No XMLRPC sync Prevent this rule from being synced to a backup host. (Checking this on the backup host has no effect.)
|
||
|
NAT reflection See “Some terms explained”. Leave this on the default unless you have a good reason not to.
|
||
|
Filter rule association Associate this with a regular firewall rule.
|
||
|
========================= =========================================================================================================
|
||
|
|
||
|
.. Note:
|
||
|
|
||
|
In OPNsense, this feature is also used to implement transparent proxies. A connection needs to be forwarded to a
|
||
|
daemon (listening on localhost), which then tries to get the original destination IP from the `/dev/pf` device.
|
||
|
|
||
|
For example, a transparent proxy that handles HTTP traffic needs a rule that forwards traffic from TCP port 80,
|
||
|
IPv4 to 127.0.0.1:3128 (in the default configuration).
|
||
|
|
||
|
----------
|
||
|
One-to-one
|
||
|
----------
|
||
|
|
||
|
One-to-one NAT will, as the name implies, translate two IPs one-to-one, rather than one-to-many as is most common.
|
||
|
In this respect, it is similar to what NPT does for IPv6.
|
||
|
|
||
|
In OPNsense, one-to-one NAT can be set up by navigating to **Firewall->NAT->One-to-one**. Here, you will see an
|
||
|
overview of one-to-one rules. New rules can be added by clicking **Add** in the upper right corner.
|
||
|
|
||
|
When adding a rule, the following fields are available:
|
||
|
|
||
|
====================== =================================================================================================
|
||
|
Disabled Disable this rule without removing it.
|
||
|
Interface Which interface this rule should apply to. Most of the time, this will be WAN.
|
||
|
Type BINAT (default) or NAT. See “Some terms explained”.
|
||
|
External network Starting address of external network.
|
||
|
Source / invert Invert match in “Source” field.
|
||
|
Source
|
||
|
Destination / invert Invert match in “Destination” field.
|
||
|
Destination
|
||
|
Description A description to easily find the rule in the overview.
|
||
|
NAT reflection See “Some terms explained”. Leave this on the default unless you have a good reason not to.
|
||
|
====================== =================================================================================================
|
||
|
|
||
|
--------
|
||
|
Outbound
|
||
|
--------
|
||
|
|
||
|
When a client on an internal network makes an outbound request, the gateway will have to change the source IP to
|
||
|
the external IP of the gateway, since the outside server will not be able to send an answer back otherwise.
|
||
|
|
||
|
Outbound NAT is also referred to as “Source NAT” or “SNAT”.
|
||
|
|
||
|
If you only have one external IP, then you leave the Outbound NAT options on automatic. However, if you have
|
||
|
multiple IP addresses, you might want to change the settings and add some custom rules.
|
||
|
|
||
|
The main settings for outbound are as follows:
|
||
|
|
||
|
======================================== =====================================================================================================
|
||
|
Automatic outbound NAT rule generation The default. Follows the behaviour described above, and is good for most scenarios.
|
||
|
Manual outbound NAT rule generation No automatic rules are generated. They can be added manually.
|
||
|
Hybrid outbound NAT rule generation Automatic rules are added, but additional manual rules can be added as well.
|
||
|
Disable outbound NAT rule generation Disables outbound NAT. This is used for :doc:`transparent bridges <how-tos/transparent_bridge>`, for example.
|
||
|
======================================== =====================================================================================================
|
||
|
|
||
|
New rules can be added by clicking **Add** in the upper right corner.
|
||
|
|
||
|
When adding a rule, the following fields are available:
|
||
|
|
||
|
===================== ==========================================================================================================
|
||
|
Disabled Disable this rule without removing it.
|
||
|
Do not NAT Disable NAT for all traffic matching this rule. Leave this disabled unless you know what you are doing.
|
||
|
Interface Which interface this rule should apply to. Most of the time, this will be WAN.
|
||
|
TCP/IP version IPv4 or IPv6
|
||
|
Protocol In typical scenarios, this will be TCP.
|
||
|
Source invert Invert match in “Source” field.
|
||
|
Source
|
||
|
Source port
|
||
|
Destination invert Invert match in “Destination” field.
|
||
|
Destination
|
||
|
Destination port
|
||
|
Translation / target What to translate matching packets to.
|
||
|
Log Put packets matching this rule in the logs. Use this sparingly to avoid overflowing the logs.
|
||
|
Translation / port
|
||
|
Static-port Prevents pf(4) from modifying the source port on TCP and UDP packets.
|
||
|
Pool options See “Some terms explained”. The default is to use Round robin.
|
||
|
Set local tag Set a tag that other NAT rules and filters can check for.
|
||
|
Match local tag Check for a tag set by another rule.
|
||
|
No XMLRPC sync Prevent this rule from being synced to a backup host. (Checking this on the backup host has no effect.)
|
||
|
Description A description to easily find the rule in the overview.
|
||
|
===================== ==========================================================================================================
|