2024-01-24 10:56:22 +00:00
|
|
|
====================================
|
|
|
|
SFP(+) Compatibility
|
|
|
|
====================================
|
|
|
|
|
|
|
|
Most OPNsense® appliances feature 10 Gigabit SFP+ cages powered by AMD® `axgbe` to allow
|
|
|
|
for flexible connectivity. Different SFP(+) transceiver modules can be used to connect to different types of
|
|
|
|
media (e.g. copper or fiber) depending on your needs.
|
|
|
|
|
2024-01-29 17:12:15 +00:00
|
|
|
Our enterprise & datacenter OPNsense® appliances may also feature 25 Gigabit capable SFP28 cages powered by Intel® `ice`.
|
2024-01-24 10:56:22 +00:00
|
|
|
|
|
|
|
Below you can find some general information as well as a list of tested SFP(+)/SFP28 transceiver modules
|
|
|
|
that are verified to work with OPNsense® appliances.
|
|
|
|
|
|
|
|
.. tip::
|
|
|
|
|
|
|
|
If you are using an SFP(+)/SFP28 module on one of the OPNsense® appliances that is not listed below but is working
|
|
|
|
properly, consider submitting a Pull Request to `our documentation <https://github.com/opnsense/docs>`__ to extend the list.
|
|
|
|
Any contribution is welcome!
|
|
|
|
|
|
|
|
=====================================================================================================================
|
|
|
|
|
|
|
|
.. contents:: Table of Contents
|
|
|
|
:local:
|
|
|
|
|
|
|
|
|
|
|
|
**General Information**
|
|
|
|
=====================================================================================================================
|
|
|
|
|
|
|
|
There are a lot of transceiver modules available on the market and they are usually one of the following types:
|
|
|
|
|
|
|
|
- Copper RJ45
|
|
|
|
|
|
|
|
Often used for connectivity up to a distance of 100 meters maximum and are
|
|
|
|
relatively inexpensive.
|
|
|
|
|
|
|
|
.. warning::
|
|
|
|
|
|
|
|
RJ45 SFP+ modules (10GBASE-T) can run at high operating temperatures in comparison to Fiber or DAC modules. Only
|
|
|
|
the datacenter level OPNsense® appliances are equipped with passive cooling for the SFP+ cages. If the ambient
|
|
|
|
temperature does not exceed 50°C, RJ45 SFP+ modules can be used in all OPNsense® appliances without issue.
|
|
|
|
|
|
|
|
- Single-mode optical fiber (SMF)
|
|
|
|
|
|
|
|
Often used for communication across large distances (100+km) and usually connected with either Simplex-LC or
|
|
|
|
Duplex-LC OS2 patch cords. It can potentially carry more bandwidth than Multi-mode fiber, but the equipment
|
|
|
|
needed to use SMF is often more expensive in comparison to MMF.
|
|
|
|
|
|
|
|
- Multi-mode optical fiber (MMF)
|
|
|
|
|
|
|
|
Multi-mode fiber is the alternative for SMF (up to 550M for 10Gb/s), often used for backbone applications in
|
|
|
|
buildings and usually connected with OM3 Duplex-LC patch cords.
|
|
|
|
|
|
|
|
- Direct-Attach (DAC)
|
|
|
|
|
|
|
|
For short ranges (up to 10M), often a popular choice due to low cost and low latency.
|
|
|
|
|
|
|
|
.. attention::
|
|
|
|
|
|
|
|
Most transceiver modules are available for purchase with a variety of different programming options for
|
|
|
|
compatibility with different vendors. Unless specified otherwise, all modules are assumed to have
|
|
|
|
the generic / MSA standard default programming.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
**Axgbe**
|
|
|
|
=====================================================================================================================
|
|
|
|
|
|
|
|
.. note::
|
|
|
|
|
|
|
|
10 Mbit/s is currently not supported by Axgbe.
|
|
|
|
|
|
|
|
--------------------------------------
|
|
|
|
1G Single-mode optical fiber
|
|
|
|
--------------------------------------
|
|
|
|
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
Vendor Type Speed Notes
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
BeanField 100BASE-BX0-D53 100Mb
|
|
|
|
FlexOptix S.B1312.20.DL BiDi LX 1G Tested module rated for 20km,
|
|
|
|
other distances are assumed to function properly
|
|
|
|
FlexOptix S.B1312.10.D 1G Tested module rated for 10km,
|
|
|
|
other distances are assumed to function properly
|
|
|
|
FS SFP-FE-BX 100Mb
|
|
|
|
FS SFP-GE-BX 1G
|
|
|
|
MikroTik S-53LC20D 1G
|
|
|
|
TP-Link 1000Base-BX WDM Bi-Directional 1G
|
|
|
|
Ubiquiti UACC-OM-SM-1G-S 1G
|
2024-03-14 13:10:27 +00:00
|
|
|
========= ============================== ======= =========================
|
|
|
|
|
|
|
|
--------------------------------------
|
|
|
|
1G Multi-mode optical fiber
|
|
|
|
--------------------------------------
|
|
|
|
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
Vendor Type Speed Notes
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
FlexOptix S.8512.02.D 1G
|
|
|
|
========= ============================== ======= =========================
|
2024-01-24 10:56:22 +00:00
|
|
|
|
|
|
|
--------------------------------------
|
|
|
|
10G Single-mode optical fiber
|
|
|
|
--------------------------------------
|
|
|
|
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
Vendor Type Speed Notes
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
FlexOptix P.1396.10 SMF 1310nm Duplex-LC 10G Tested module rated for 10km,
|
|
|
|
other distances are assumed to function properly
|
|
|
|
FlexOptix P.B1696.10.DA + P.B1696.10.AD 10G Simplex-LC. Two complementary modules are needed.
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
|
|
|
|
--------------------------------------
|
|
|
|
10G Multi-mode optical fiber
|
|
|
|
--------------------------------------
|
|
|
|
|
|
|
|
============= ============================== ======= =========================
|
|
|
|
Vendor Type Speed Notes
|
|
|
|
============= ============================== ======= =========================
|
|
|
|
Cisco-Finisar SFP-10G-SR 10G
|
|
|
|
FS SFP-10GSR-85 10G
|
|
|
|
FS SFP-10/25GR-85 10G
|
|
|
|
IBM-Finisar FTLX8571D3BCL-IC 10G
|
|
|
|
Intel AFBR-709DMZ-IN2 10G
|
|
|
|
Mellanox MFM1T01A-SR 10G
|
|
|
|
Ubiquiti UF-MM-10G 10G
|
|
|
|
Uptimed UP-TR-SR-CI 10G 10G
|
|
|
|
============= ============================== ======= =========================
|
|
|
|
|
|
|
|
--------------------------------------
|
|
|
|
1G Copper RJ45
|
|
|
|
--------------------------------------
|
|
|
|
|
|
|
|
========== ============================== ============= =========================
|
|
|
|
Vendor Type Speed Notes
|
|
|
|
========== ============================== ============= =========================
|
|
|
|
FS SFP-GB-GE-T 10/100/1000Mb
|
|
|
|
HP (Aruba) Instant On 1G
|
|
|
|
MikroTik S-RJ01 10/100/1000Mb
|
|
|
|
StarTech GLCTST 1G
|
|
|
|
Ubiquiti UF-RJ45-1G 10/100/1000Mb
|
|
|
|
========== ============================== ============= =========================
|
|
|
|
|
|
|
|
--------------------------------------
|
|
|
|
10G Copper RJ45
|
|
|
|
--------------------------------------
|
|
|
|
|
|
|
|
========== ============================== ============= =========================
|
|
|
|
Vendor Type Speed Notes
|
|
|
|
========== ============================== ============= =========================
|
|
|
|
FS SFP-10G-T 10G
|
|
|
|
Uptimed UP-TR-10G-RJ45-CI 1/2.5/5/10G Will always link at 10G on axgbe,
|
|
|
|
maximum speed is determined by link partner
|
2024-03-14 13:10:27 +00:00
|
|
|
FlexOptix T.C96.02.KMF 1/2.5/5/10G Will always link at 10G on axgbe,
|
|
|
|
maximum speed is determined by link partner
|
2024-01-24 10:56:22 +00:00
|
|
|
========== ============================== ============= =========================
|
|
|
|
|
|
|
|
--------------------------------------
|
|
|
|
10G Direct-Attach
|
|
|
|
--------------------------------------
|
|
|
|
|
|
|
|
========== ============================== ============= =========================
|
|
|
|
Vendor Type Speed Notes
|
|
|
|
========== ============================== ============= =========================
|
|
|
|
Aruba SFP+ DAC 10G
|
|
|
|
Cisco SFP-H10GB-CU1M 10G
|
|
|
|
FS SFPP-PC02 10G
|
|
|
|
MikroTik XS+DA0001 10G Rated for 1/10/25G, only links on 10G
|
|
|
|
Netgear AXC761 10G
|
|
|
|
Startech DACSFP10G1M 10G
|
|
|
|
Ubiquiti UniFi 1m DAC 10G
|
|
|
|
========== ============================== ============= =========================
|
|
|
|
|
|
|
|
**ICE**
|
|
|
|
=====================================================================================================================
|
|
|
|
|
|
|
|
--------------------------------------
|
|
|
|
25G Single-mode optical fiber
|
|
|
|
--------------------------------------
|
|
|
|
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
Vendor Type Speed Notes
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
FlexOptix P.B1625G.10.ADI 25G Tested module rated for 10km,
|
|
|
|
other distances are assumed to function properly
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
|
|
|
|
--------------------------------------
|
|
|
|
25G Multi-mode optical fiber
|
|
|
|
--------------------------------------
|
|
|
|
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
Vendor Type Speed Notes
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
FlexOptix P.8525G.01 25G
|
|
|
|
FS SFP28-25GSR-85 25G
|
|
|
|
Uptimed UP-SFP28-SR-CI 25G
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
|
|
|
|
--------------------------------------
|
|
|
|
25G Direct-Attach
|
|
|
|
--------------------------------------
|
|
|
|
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
Vendor Type Speed Notes
|
|
|
|
========= ============================== ======= =========================
|
|
|
|
FlexOptix P.C3025G.H Passive 25G
|
|
|
|
========= ============================== ======= =========================
|