All different paths that are available to your firewall can be managed from this page, which can be found at :menuselection:`System->Gateways->Configuration`.
You can either define these gateways yourself, or they can be provided automatically from dynamical configured interfaces (e.g. dhcp), in which case they won't
have a predefined address.
When a gateway is generated automatically, you still have the ability to change its settings. Automatically generated gateways usually have
names like :code:`WAN_DHCP`.
In cases where you need to forward specific networks to a specific target, you can use static routes, which can be configured in
The overview page (:menuselection:`System->Gateways->Configuration`) shows all currently known gateways and their statuses in order of importance (most important on top).
When a gateway is considered "default" it will show **(active)** behind the name.
..Note::
The **(active)** status shown in the list reflects the current calculated default, which might differ from the machine routing if gateway switching is not enabled.
You can always check the current active default in :menuselection:`System->Routes->Status`
..Tip::
When debugging dynamic gateway issues, always check if your expected gateway is actually in the list. The system will only consider
items shown here.
----------------------
Settings
----------------------
Below you will find the most important settings that are available for a gateway item.
Most dynamic interface types write their current gateway into a file named :code:`/tmp/[interface]_router` or :code:`/tmp/[interface]_routerv6`.
When the expected gateway is not listed in the page, there might be an issue with the interface type (for example the remote server isn't providing one at the moment).
When a gateway is marked offline, always check if the monitor address is reachable via the correct interface first.
You can use :menuselection:`Interfaces->Diagnostics->Ping` to test connectivity.
In case the monitor address is not in the same subnet as the interface,
also check if there's a static route (:menuselection:`System->Routes->Status`) available which sends the requested traffic to the correct upstream gateway.
There should always be a :code:`dpinger` process active, which you can check on the services page (:menuselection:`System->Diagnostics->Services`),
finally if all seems to be running you can deep dive into the packets leaving the interface,
if dpinger is active, there should be ICMP packets heading to your monitor address, which
you can inspect using :menuselection:`Interfaces->Diagnostics->Packet Capture`.
